ASUS RTX 3060 Ti LHR Limited Ergo mining hashrate (Testing Ergo mining Autolykos)

Today we take a look at an RTX 3060Ti LHR mining on Ergo (Autolykos2 algo). This specific model is a 3060 Ti ASUS Tuf OC edition. The LHR hurts the performance on ETH, but does it on Ergo? Lets find out!
Thanks for Watching!
Join HIVEOS: hiveos.farm?ref=815591
or use my code BLAZINGMINING
Join the discord: / discord
Do keep in mind hashrates may very, and success of overclocks will too. Not all cards are created equally in terms of their silicon lottery or model. Profitability varies, this is the profitability mining Ergo at the time of recording and is only for reference. I do not take any responsibility for damage to hardware or anything else that overclocking can potentially cause.
Overclocks:
55% PL (110 watts in software)
-502 core clock
+900 mem
85% fan

[@RCInsiders]

Rock on brother! Ready for Winter yet? Time for some snow bashing 😜 Hope you are well my friend

[@Backyardwrenching1243]

Yeah, I think I am. time to get those extra control arms for cold weather breakage lol... Hopefully I get some snow!

[@RCInsiders]

@@Backyardwrenching1243 Too bad we didn't only get snow when its in the 70's & it only sticks in the grass 😜

[@Backyardwrenching1243]

@@RCInsiders lol. That would make it perfect (except for having to mow snowy grass since its growing at 70)

[@RCInsiders]

@@Backyardwrenching1243 LOL!! It'd be worth it 😂🤣

[@Ultralink1001]

Thanks! This is exactly what I was looking for

[@Backyardwrenching1243]

Glad it helped! Thanks for watching!

[@fireyeskebin938]

Thanks a lot my guy, I am getting 119-128 @ 109 watt 😁😁

[@Backyardwrenching1243]

Sweet! Glad it helped :)

[@Gumbrainz]

I cracked lhr cards on ergo a week ago! I see that you have found sweet spot on 3060 ti now try to under volt the card. You can keep the same hashrate, but cut some watts off. I have revision 1 and revision 2 cards and i can say that you can get revision 2 cards run more efficient then revision 1. Try it out and let me know.

[@Backyardwrenching1243]

I will try it out! I messed with some undervolting a bit, ill have to check it out again. Thanks for watching!

[@Gumbrainz]

@@Backyardwrenching1243 when you undervolt try to keep the same CC, that way you wont lose your hashrate and stop where you see that hashrate drops. My card is locked at 1200mh CC and i was able to undervolt it from 850mV to 750mV. Efficiency 1.33

[@Backyardwrenching1243]

@@Gumbrainz Thanks for the starting point

[@piereligio_ds]

How did you crack them, you cracked V1 or V2? And what mhs did you get on ergo?

[@Backyardwrenching1243]

@@piereligio_ds Im not sure if the hashrate got higher than 130, but the power was lowered even more so it was more efficient. I still have yet to try it out

[@scottmarto5199]

Have x3 Galax 3060TI lhr cards runing on Trex miner in windows - results below All have different OC settings (Afterburner). If I drop the card that needs 143w down it drops of mh/s very quickly. Just goes to show how different each card is even the exact same models. 1: PL 64 CC 0 MC 1150 -135 mh/s @ 127w 2: PL 77 CC +135 MC 1150 - 135 mh/s @ 143w 3: PL 60 CC 0 MC 1250 (1300 is stable as well and got up to 138 mh/s) - 137 mh/s @ 119w

[@Backyardwrenching1243]

Yeah its weird how different settings need to be for different cards who have LHR. Good results!

[@scottmarto5199]

@@Backyardwrenching1243 Thanks. They all get around 41 mh/s for Eth using NBminer 39.2 however I had fairly high OCs set as they were running on Nicehash which was jumping from Raven 27 mh/s, Conflux 52 mh/s and Eth

[@Backyardwrenching1243]

@@scottmarto5199 Oh ok, I can get mine up to about 41-42 on ETH if I push the memory to 1050-1100. If you want to stop NH from switching algos frequently I just disabled some of them.

[@jkelsall2017]

what memorary is you galax cards hynix?

[@scottmarto5199]

@@jkelsall2017 Yeah hynix. I have had to adjust the cards memory OC individually however they get around 44mh/s on the NBminer 40.0

[@ElvizMan]

What software are u using for the graphic table?😁

[@Backyardwrenching1243]

Msi afterburner.

[@JalalHussaini]

Not all cards get this hashrate. I have a few cards from different brands and I found that the ones with Hynix memory can get upto 136 mh/s while the ones with Samsung memory only get around 95-100 max mhs

[@Backyardwrenching1243]

Yep, there are differences in cards and differences in silicon lottery. This video was made with a Hynix memory 3060ti. Thanks for watching!

[@artiomruable]

my ichill x3 on hynix giving 134.2 mh/s, bought before a week 4 msi gaming x , 2 of them giving 90 mh/s and 2 133, think i got version 3 maybe (

[@Backyardwrenching1243]

@@artiomruable Yeah ive heard about some cards not pushing 100. very weird

[@rodenmaar843]

I use samsung memory get 130 mh/s 99w

[@artiomruable]

@@rodenmaar843 my gigabyte aorus on samsung not going more 90 mhs, so i put on etherium with nbminer 42.5mh/s 125w

[@mrbasfed1948]

For Hynix V1 memory I could find stable +950 memory clock and there is no crashes or lost shares. I can share my OC core: -200 memory +950 PL 53 I get 128-131 MH/s at 105-109 Watts.

[@Backyardwrenching1243]

Thanks!

[@anthonylau9379]

With this card, reached 140mhs on 62% pl, memory oc by 1200

[@Backyardwrenching1243]

Great results!

[@starrims]

Am also getting 130 @ 120 watt. But at RVN I can’t get over 27.5 no matter what I do! At least it not worse like some cards which can’t even pass 25!

[@Backyardwrenching1243]

Yeah I have a 3070 that won't break 30 on RVN, must be silicon lottery. Thanks for watching!

[@duanelandsem6196]

My gaming x 3060ti is the same

[@Backyardwrenching1243]

@@duanelandsem6196 Sweet! or not sweet, silicon lottery isn't always nice. But hey if its hashin, its makin money!

[@robertcostache3723]

How did you get 130 mhs with LHR ? I have only 88

[@Backyardwrenching1243]

With those overclocks I could get 130. Usually ~90 came from higher memory or core clocks from my research.

[@robertcostache3723]

@@Backyardwrenching1243 I use the same overclock like you. I get only 88/90 mhs on the same GPU

[@markw496]

There are two diff lhr versions. He must have v1 and you have v2.

[@markw496]

You can get higher but v2 you need to boost core to 920-1050 somewhere.

[@LordLab]

@@markw496 he have 3060 Ti , not the 3060 , only 3060 have v1 ( driver lock ) and v2 LHR ( hardware lock ). old 3060Ti not have any limits at all , and 3060Ti LHR is limited , there is no other versions .

[@furkankapt2616]

Did your card hashrate going up and down ? on ergo

[@Backyardwrenching1243]

No, ive found it to be pretty stable. Doesn't fluctuate more than 1 or 2 megahash. Thanks for watching!

[@papate01]

GIGABYTE - AORUS RTX3060 Ti ELITE 8G lhr (rev. 2.0) power limite 60 : memory clock 1200 : Hashrate 151mhs

[@Backyardwrenching1243]

Thats really good!

[@TiagoRodrigues-fy9pd]

What's your memory temperatures?

[@Backyardwrenching1243]

No way to measure, g6 memory does not have memory temp readings sadly

[@mrbasfed1948]

I can only suppose that it is higher than the core temp by 30 degrees C. I have a 3070 Ti card and it has memory temp readings so there are 46 degrees on the core and 76 on the memory. It is known that GDDR6X is hotter than GDDR6 but even if we take the worst case scenario it will be safe to mine ERGO as long as the core is cooler than 60 degrees C.

[@zainahmed9923]

How do I get into this? Got a Strix 3060ti Lhr

[@Backyardwrenching1243]

Get into mining?

[@zainahmed9923]

Yeah. Doing some research now. I’m going with eth. Since they showed it’s the most profitable for 3060ti lhr. Am I doing it right? 😅

[@Backyardwrenching1243]

@@zainahmed9923 Yeah, your correct. With the new unlocks ETH is the most profitable.

[@zainahmed9923]

@@Backyardwrenching1243 Yeah but now there’s another one on the top. Swap. 😬 Don’t know what’s going on. Before that it was flux. Really confusing and I have no idea where to start now. Please help. I have a LHR

[@Backyardwrenching1243]

@@zainahmed9923 I would just stick to ETH. Some of these other coins may be difficult to sell or trade. You could even try starting with NiceHash, and it would automatically exchange everything to BTC, using the most profitable algorithm

[@antonelagalazzo1108]

zotac vram samsung pl50 CC-502 MC +1340 Fan 60% 99w 132/133MH/s

[@Backyardwrenching1243]

Awesome!

[@jorgemiiranda]

I use Zotac 3060ti Hynix memory - PL 0 / M 1590 / C 1550 = 128.5 MH/s / 126w

[@mrbasfed1948]

Not efficient enough.

[@Jt-ii9hl]

cool thanks

[@Jt-ii9hl]

i'd like to mining rvn with my rtx 3060ti lhr, but the rvn wallett seems flakey... im thinking of using nicehash to mine rvn into btc..

[@Backyardwrenching1243]

Thanks for watching!

[@Backyardwrenching1243]

@@Jt-ii9hl Yes you could use NH to mine RVN into BTC, or you could try using another wallet. I use Exodus wallet, no issues so far.

[@bogslurp3532]

@@Jt-ii9hl Mine RVN to Exodus wallet?

[@geostricks275]

@@bogslurp3532 Yes, exodus is by far the best wallet, been using for about 3 years now. Never had any issues.

[@marcosstr]

I just bought the EXACT same card, I'm getting 110mhs but with 95w and no memory overclock. Where I live is way too hot, so this way I kept the gpu at around 45-50°c ( during the day) and the hot spot on the board at 60°c, for longevity purposes. But Still It's one GREAT heat dissipating design they built.

[@Backyardwrenching1243]

Awesome! 95 watts is decent for 110mh. I would recommend overclocking your memory, it won't add much heat or wattage. Thanks for watching!

[@pqleite]

I have this Card but i getting cuda error always. Hynix memóry. Anyone can help me

[@Backyardwrenching1243]

Usually cuda errors are from faulty overclocks, maybe they are unstable.

[@doomslayerforever2858]

so basically to make the same daily you would need to buy a 3090 for $1500

[@Backyardwrenching1243]

Yep lol

[@mrbasfed1948]

I wish I could get 3090 for $1500. )) It costs $3500 now... in the poorest country of Europe. ))

[@OnSkyla21]

I got 134 mhz

[@Backyardwrenching1243]

Awesome!

[@Jazon2901]

I get 134 @ 121w

[@Backyardwrenching1243]

Very good!

[@kowaloxddd3870]

Core -625 memory 2700 pl 115

[@kowaloxddd3870]

Try this

[@kowaloxddd3870]

Mbminer

[@Backyardwrenching1243]

I will try it, thanks!