Asus TUF Gaming LC II 360 ARGB - Installation Guide & Performance Test

[@Don_Dotta2786]

just installed this piece of art on my full diy TUF GAMING PC build because the air cooling gave me 92 degrees celcius with gaming. Now with this i get a nice 50 degrees wich i feel much more comfortable with. im waiting for a vertical bracket for my 3060TI TUF GAMING video card.

[@elfyonabiscuit]

I was sitting here so confused thinking I was missing something but it’s supposed to be spacers under the stand offs not after. I kept thinking misplaced another group of spacers that’s came originally with my mobo. Just take note, spacers go under standoffs and screw into mounting bracket.

[@Mabrjjcj]

Best In Install !! Great closeup. Excellent order of operation. No background discussions off topic. No sloppy handling of CPU. Great you had performance testing, but left out Star Citizen...

[@KillerKurous]

Are you sure you put the standoffs in the right order? It's standoffs then screws in the manual.

[@JegsTV]

Theres already a mounting bracket for you to put in the standoff screws on the am5 platform which i used here. Might be a different scenario for other chipset.

[@JegsTV]

Btw, the spacer is different from standoff. You might be mixing up the two.

[@PSandling]

​@@JegsTVCheck the manual online. They have changed the order of the spacers. Great content 👍

[@iSoAzian]

Intel you have to change the backplate with the provided one which is why there is a difference. Then the spacers and screws last before mounting the unit

[@JusteneLaurene]

still not available anywhere :(

[@danieltinker6319]

Just got mine on Amazon

[@boon5140]

Great content!

[@_omay_yt6098]

Is it a best quality product and value for money

[@XxAbdo]

Is the 240ml one good?

[@lonrea2886]

another great content bro

[@theminecraftnoob9357]

Is it a 4pin or 3 pin rgb connector and also does it have to connect to a system/chassis fan header or the cpu fan header?

[@raslancast8608]

during full load, does this stand - out noise come from the pump ?

[@JegsTV]

the noise is barely noticeable on my end. and i tested this with an open case. so for sure you wouldn't notice any noise if you have a closed case.

[@en3ru]

can pls tell me if can change the logo on the pump with the cpu temperature?

[@JegsTV]

Nope you cant.

[@en3ru]

ok thx@@JegsTV

[@LacosteBoy1986]

great explain

[@tumeekay3113]

hey, is it bad that my plastic spacers are loose since i wasn't able to screw the standoffs all the way in

[@JegsTV]

@@tumeekay3113 best to screw the standoffs all the way in mate and the spacers firmly in place. You might be okay now but it may cause issues down the line.

[@tumeekay3113]

@@JegsTV Thanks, it's just I wasn't able to screw the whole thing in by hand and I don't have a screwdriver with a socket of that kind. What screwdriver do I need for that kind of standoff anyway?

[@JegsTV]

hex screw. like this one. amzn.to/3z7krWt

[@tumeekay3113]

@@JegsTV Thank you

[@alikazemi2150]

lc ii 360 vs lt720 ?

[@almotamezzalmotamezzzz]

Can it cool a 13700kf processor?

[@JegsTV]

Yes it can. :)

[@amirmohammad527]

How about 14900kf?​@@JegsTV

[@MikaTarkela]

Thanks for the guide. I just received this cooler and the manual is not too good for someone who has never installed this kind of a cooler. For starters.. I have no idea which direction the fans blow and the manual doesn't explain it. There is no indicator on the fans so I have no idea which way to install them into the radiator. I need to install the radiotor in front of my case.

[@biounity7498]

Forgot to place plastic collars in my build, should i re do it ?

[@JegsTV]

If youre having the expected operating temperatures, then no need to place it. Just remember to put them when you repaste the pump block.

[@nightfall7170]

All tajt noise is from the pump? or fans?

[@nightfall7170]

That thing is pretty noisy :( And what type of pump connector used here? 3 pin or 4 pin? Can I reduce the noise level?

[@ssss-xt3dk]

Can it cool i9 12900k

[@adamzwagerman]

It cools mine just fine!

[@mulagraphics]

KZbinr leave out so much!

[@JegsTV]

like what?

[@monacocross4241]

3 PROCENT SAME LIKE NOTHING NO POINT BUY ASUS

[@carbontube7956]

Bro ur thermal paste application sucks

[@JegsTV]

Thats a perfectly fine amount of paste.

[@anshumanbose7430]

The way I see it there's nothing wrong with the centre dot application of TP as the contact plate will eventually spread the paste out as in a short period of time, not all the time the whole spatula spread method is ryt as it barely leaves any room for spread and in turn causes issues later.

[@JegsTV]

@@anshumanbose7430 exactly. Bro is mad for no reason

[@penttijakonen3817]

​@@JegsTVIt's physically impossible to get the optimal amount of paste with that pattern. But sure bro, why improve when you can just be in a denial. 👌

[@JegsTV]

@@penttijakonen3817 ive built hundreds of pc using that thermal paste application method. No overheating, no failure. But sure let the random experts on the internet tell you youre wrong 👌