ATE WIN Modules

[@Formerlywarmer]

I just received the one I ordered from u last week for my 2010 Charger pursuit. I spoke with a lady there and she verified all my info on the car and very polite and professional. I’m about to install it now.

[@mstarn00]

So if i have a gen 2 in my sons 2010 ram im shit outta luck? I pulled the win and cleaned it and then the truck would start again. Now it wont do anything.

[@jesusbeltran2112]

My truck it turns on but the locks on the remote don't work

[@josephs984]

Hi, I have a 2012 T&C. I am currently not sure if I have an issue that needs my keys to be reprogrammed or if I have a bad WIN module. My win module is an P05026534AI. When I put my fobs into the ignition I have a 90% chance of the cluster saying "damaged key". Eventually I can have the key be read and the car will turn on, but the inconsistentency of how long it takes for the fob to be read is a concerm and I don't want to get stuck. The issue started with one of my fobs and then all of a sudden my second fob started doing the same thing. I can lock/unlock, open and close doors without a problem with the fobs. Batteries are brand new. I checked the fuses, the alternator and battery are also new. Hoping you can give me some idea of next steps thank you in advance.

[@AutoTechElectronic]

@josephs984 you need a new win replacement kit that comes with 2 fobik remote keys programmed to your vin. Select WIN4 with remote start or WIN4 No remote start. autotechelectronic.com/win-module-kits/

[@Formerlywarmer]

I installed my new WIN I got from you last week. Works just as u describe my only question is why to the remotes need to be 20-25 feet from the car to work? What can be done to Increase the distance to normal?

[@AutoTechElectronic]

Do you have remote start? Was there an external antenna for your WIN?

[@Formerlywarmer]

@@AutoTechElectronic no the car wasn’t equipped with remote start and we didn’t add it. No exterior antenna that I can see.

[@Formerlywarmer]

@@AutoTechElectronic the win had only the single multi pin connector

[@radupreguza4270]

Hi! I need your opinion. My T$C 2012 has keyless entry and the start stop button and time to time the button stops working so I removed it and was using the key fob to start it. One morning I went to open the car and the car didn’t react to the key so I opened it with the metal key, the alarm went on so I decided to insert the key fob in the ignition and the key got stuck in, the car didn’t start and didn’t want to release the key and also the red dot was flashing. Have checked the fuse 27 and it was fine (I removed the fuses for the horn do not disturb everyone around) and I have moved the shifter up and down and still didn’t let me pull the key out so I put a little force on it and released. So my question is, what should o check or replace to be able to unlock the car with the key fob and to be able to start it ( have an spare key fob and the car can’t see it either). I called a lock smith to reprogram another key and he wasn’t able because the dashboard didn’t turn on. I found an WIN module at the LKQ and installed it on my car and nothing changed 😢

[@AutoTechElectronic]

check pin 1 for 12v blue with red strippe. the WIN has to be replaced with a new win kit. a flashing light can be a bad WIN or bad pcm

[@danielmaldonado258]

My 2012 challenger rt messing up I have to press the lock/unlock fast and a lot for them to work and push start randomly works. Screen says fob not detected sometimes or key damaged. I can’t afford $800 for win module. Got the car for push start and also the other key does nothing both have new batteries. Please help me out I don’t have $800 plus for new module thanks

[@AutoTechElectronic]

Reply to other post you left.

[@angelalfaro772]

How do I contact or text?

[@AutoTechElectronic]

You can call our office at [phone], or send us a text at [phone]