Nice video. I have been repairing this stuff since the 80's too.... love your vert careful application of the switch cleaner! :) I am the same, whereas you see many people straying vast amounts all over the place! Lovely bringing these old machines back to life isn't it :) I recently repaired a CDP-105, gave it to a good friend of mine and its now in daily use again :)
@spytromics3 жыл бұрын
Thanks! I have a similar unit and it has problems loading discs. I didn't know about the switches. Now I do! Thanks so much!
@bryansonnet24546 ай бұрын
Thanks, watched the video since I have the exact model, seeing no disk. I'll take your instruction to clean the 3 switches and clean the optical laser/sensor.
@lynneset29322 жыл бұрын
Thank you so very much. I just watched and fixed my Sony C515 5 disc player after 👀 your video. Christmas Cds/music 🎶 on blast now. Thank you so much for sharing your knowledge. Be Blessed 🙌
@12voltvids2 жыл бұрын
If i hear any more Christmas music I am going to puke. Overkill. Every place you go that's all they play. Every place has it on music on hold. For me Christmas music from dec 15 to 25 then no more. Radio stations have been playing it 24/7 since Halloween. Sick of it already. Was at a restutaunt having lunch the other day. Was all done and waitress forgot about me. Christmas music full blast for 32 minutes while i waited.bi was starting to feel nauseous. It's ok in small doses but 24/7 is just too much.
@davecooke9145 ай бұрын
Great job Dave 👍
@AndyP1263 жыл бұрын
I’m glad you lubed it. It made a huge difference in the noise level
@alexispieltin93793 жыл бұрын
Another fine job, well done. I appreciate the story about the divorced lady, having some music is always a good thing to start a new life. And I guess this part is also make the joy of another customer. These old machines are well made and engineered, cause they combine functionally interesting things with simplicity, and you can get them for virtually nothing! It's more simpler than 50 + CD jukeboxes with all CD cases ending lost or broken, and a pain to manage or even change 1 disc. The practical limit is the 6 disc in a tray made for both home or car units. Of course, these solutions seems "outdated", if not obsolete. Nowadays, any audio geek will tell you about lossless audio files shared on a NAS. Of course, recording your 1000 + CD collection will then take some time, but once it's done... Then you can read your music on any home PC or DNLA unit! And if you want to get high end audiophile style, computers can also come with a high end audio card, but most best recent motherboards integrate a digital output, so you can "simply" use any external quality DAC (let assume it can decode properly your audio format: OGG, FLACC or WMA are sometimes problematic on old machines). Next is home solutions made with microcomputers Arduino or Raspberry style to complete a reader with a high end DAC. Of course, money can replace technical skills with some integrating high end new audio servers from NAD, Cambridge Audio, PS Audio... + with internet access to virtually access endless music flow, countless internet radios. But what a headache if you want only music for an evening!
@12voltvids3 жыл бұрын
I use an arlic streaming DAC into a tube amp. Can play from computer and many online services. I don't though. I have an old phone with a big SD card with all my music on it. It sits next to the amp plugged in, connected by bt. I can use the remote with the streamer to change tracks and volume ect. Sure i can control from phone but too much work. I just want to turn on and have music. Or i turn on my 200 disk cd player.
@macdaddyns Жыл бұрын
Thanks for the video, I'll try those switches on my CDP-500. Everything seems ok, but, it will not spin up the disc motor. Laser twitches up and down and rails are clean and lightly lubricated. Cheers!
@chickenfoundation93239 ай бұрын
Check the green ribbon wire for cuts in the traces
@deropol053 жыл бұрын
La Belle has plastic compatible grease that's available at hobby shops. Not sure if that's acceptable, but it comes in small tubes
@DeadKoby3 жыл бұрын
Cool... I have a decent general electronic background, but watching someone with the service experience is the best learning tool.
@wd35743 жыл бұрын
I have this exact same unit, purchased from a thrift store. The chassis is made mostly of plastic, but the ladder style DAC has a nice sound and the mechanism is very reliable. The cogged rubber belts never slip.
@coldginuk13 жыл бұрын
I broght one from a car boot sale for £5. You're right the DAC is very nice sounding. The only thing that does annoy me about it is how plasticky it sounds when it rotates, but apart from that an excellent player.
@danielgumm4213 жыл бұрын
I was so happy to find this video. I had this CD player years ago, had to leave it behind when I moved across the country. Just found a similar model at a local antique shop and it works as expected except the tray makes a horrible rattling noise when it rotates, like you noticed. Would love to get a suggestion on what you think it could be as it's much more noisy than the one I had originally. I am wondering about the rollers underneath maybe having a flat spot.
@dougtaylor77243 жыл бұрын
I remember seeing a 4 tape 8 track player. 2.5 hours of dragging music!
@RobertGuido Жыл бұрын
Pick myself up one of these units. I have a lot of memories of it because my dad bought one at the federated electronic stores when they went out of business. Anyways for 1988 when we got it it was high class. Mine is having similar problems. Since I tore it out I decided to replace All the capacitors. Most of them were good but a couple were bulging so I said screw it why not. Spent $40 on capacitors for a $20 unit😅
@pliedtka3 жыл бұрын
Dave knows the Sony tricks ! Have one of those, but no Digital out, and no variable headphone out, so it kind of sucks. Before I had Yamaha X-change CDC-805 from '91, it had all the goodies, but the Sanyo laser gave up (so-so at error correction). Maybe I look into schematics and see if I can add digital out, preferably optical. Usually Sony CD players last long time.
@tough2133 жыл бұрын
Yet against another great job you can do it all all the best be safe
@timbernie3 ай бұрын
sony cdp-ce500 5-disc repair. Take tray off and there is another optic switch. Clean that also.
@markshellard58943 жыл бұрын
Had a aiwa unit years ago it was brilliant
@Darryl6033 жыл бұрын
I'd say it'll pay for some gas but you don't use any! Nice job Dave, thanks for sharing...
@12voltvids3 жыл бұрын
My Harley uses a fair bit of gas but it is about to be parked for the winter.
@1sirenitaa3 жыл бұрын
Hello, I just wanted to say thanks for the great videos! They are very helpful! I did have a question, my cd changers carousel won't spin when the tray gets back into it's home position. When it ejects it seems to work fine, it does the disc skip and everything and rotates. When it goes back in the carousel stops rotating and the lever on the inside the pushes up on the cd and has the blue sensor will not lift up. Is there anyway to fix this? I bought it at my local goodwill and have 7 days to return if it doesn't work however I would like to save it if I can. Also if I were to take to a repair shop, how much does they usually charge? I'm pretty new at this so any info would be helpful! Thank you in advance!
@VirtualRobotsRevolt6 ай бұрын
Took mine apart completely, but i can't figure out how to seat the laser again. The teeth on the laser sit too high up and not catching the bottom gear, only the top one. And when i put a disc in it can't read anything now and sounds like its scratching the disc. Original reason for taking it apart was to replace the laser since it was skipping on every cd i would put in it.
@KHzSineWave3 жыл бұрын
Pesky switches! Don't blame you on the gloves, contact cleaner can be nasty stuff plus your hands end up smelling like it for hours afterward. As for the grease I've started using teflon grease, works well and it's plastic safe.
@wd35743 жыл бұрын
I use Finish Line bicycle grease which contains some Teflon. Seems to work fine for me.
@chickenfoundation93239 ай бұрын
Mine has the same problem, sometimes the tray doesn’t come out and I have to turn it off then back on and it will open, spins disc for few seconds but doesn’t read them, checked the switches and they all are good, turns out the green ribbon wire has a cut in one of the traces near where it connects to the optical assembly, hopefully that’s the problem
@kbobdonahue1966 Жыл бұрын
I bought a Sony CDP-C325 and it jumps tracks. Is there something that I can do about the issue? Thank you.
@carolynerickson8520 Жыл бұрын
I have this player and it skips. In another video you adjusted the t-gain and e/f balance. Where would I find these adjustments on the sony cdp-c500?
@tiredfingers99 Жыл бұрын
I have a Sony LBT-ZX99i that refuses to spin the disk after its loaded into the reader, the tray moves fine. I can see it twitching as if its trying to spin the disk but no luck. I tested the motor by itself and it works great and have already replaced the chip thats directly wired to it, its a ROHM BA5947FM. Any advice would be appreciated.
@Aaron482193 жыл бұрын
I sold audio gear back in the mid-90s...Sony cd players were returned, and brought in for repair, so often because of optics failures.
@markchandler70853 жыл бұрын
Amazing it was such a minor repair! I wouldn't say David Grey is garbage though 😉
@DJ_PHILCO792 жыл бұрын
My display lights don't work but CD's still play??any advice
@rickydamian50953 жыл бұрын
(0:25) and (0:26) Cat and short circuit
@rfburns56013 жыл бұрын
My CDP-C500 has a problem with the microcontroller software; when loading with 5 discs one at a time, then hitting 'shuffle', it will eventually get hung up bouncing back and forth between the same 2 songs on 2 different discs. The fix - load machine, advance to disc 1 position, power off, power on, let machine read disc and tracks from all discs, then hit shuffle, machine will properly shuffle play.
@janetolin5548 Жыл бұрын
What is the cleaner/grease you use?
@cubinn1493 жыл бұрын
I used to own the sony cdp c505 one of the better players i still own a single disc 18 bit player
@mryamaha1003 жыл бұрын
double cat meow love it
@scottm.16022 жыл бұрын
I have a Sony CDP-250Z. It worked great with no issues. I tried to play a CD the other day and it wouldn’t play a CD. It seems to be trying to pick up a CD then cycling over and over again. When I take out all the CDS it still is making a noise like it’s trying to load a CD. Would appreciate any tips, thanks.
@teacosts Жыл бұрын
I think the first problem was you tested it with a 700MB modern CD-R. They don’t play well when given a disc capacity they are not expecting. If you put in a normal CD or 650MB CD-R I can guarantee it would’ve worked. I have the same Sony CDP-C500 player myself.
@12voltvids Жыл бұрын
The track picture on the 700 Meg discs is identical to the 650. The only difference between the 650 and 700 is on the larger capacity discs the recording surface goes out closer to the edge. Something like 4 mm difference is it'll be different between them and I haven't seen any players that support CDR that have any problems at all playing the 700 Meg discs I have had players that refuse the 800 MB discs. On the 800 megament desks the track pitch is narrower at some of the older lasers the spot isn't small enough to track them properly
@Travis1411233 жыл бұрын
2 things I don't mess with. Printers and disk changers.
@jameskrivitsky97153 жыл бұрын
Dr. Dave, you mean you wouldn't pull out your electronics stethoscope and carefully check for pulse and find the SQEAK ? Probably won't hear it much when the lid is back on. I will need to check my Sony combo CD / boom box and see if the switches are the culprit. Thanks JwgK
@12voltvids3 жыл бұрын
Nope don't care about the squeak. If anyone asks i will tell them there is a mouse inside.
@guillermosequeira19272 жыл бұрын
Minute 3:09, the unit read the toc perfectly before you cleaned the switches...
@nickfrench73723 жыл бұрын
Looks like that gear drive wheel needs a bit of a clean of dirt and grease too. In the start of the video,,,the 2 cats,,,,and the short circuit of what looks like an amplifier,,,,what happened with the short circuit,,,did that thing blew up?
@12voltvids3 жыл бұрын
It was a power supply. I popped it.
@nickfrench73723 жыл бұрын
@@12voltvids Ok,,,u had popped a power supply,,,i guess by accident,,,or deliberate,,,as i guess the machine was no good in repairs?
@taketimeout2share3 жыл бұрын
Meow! (x2) BTW I work in a vintage Sound and Vision outfit. CD changers for some strange reason command a premium. I think 50 dollars. The few people who like them really like them.
@sumitpaul97553 жыл бұрын
Can you help me out with how to repair push power protect on sony MHC RV5 hifi model
@jossyd85313 жыл бұрын
how can i fix jvc dx-u10 software thing ; when i touch USB button its goes to DVD Or other source TAPE -A OR TAPE-B
@nickfrench73723 жыл бұрын
Hope the player did play all the 5 discs well too b4 u had sold the machine.
@12voltvids3 жыл бұрын
It plays all the disks. Haven't sold it yet but it will go because i have no need for yet another cd changer. Those units being in good money.
@nickfrench73723 жыл бұрын
@@12voltvids Ok. Good how it did played all the discs,,,and haven't sold it yet. I've got a few cd players too,,,few from pioneer,,,a twin tray unit,,and a 6 stack cd player with a few cartridges i bought for $5,,,needed a good clean out,,and replaced belts for the 6 stack changer mechanism,,,plays really well on every disc. Pioneer twin tray unit plays well too. Have also a Yamaha carasoul 5 disc changer too,,,,bought 2nd hand and only needed one belt for the drawer tray drive,,,it works great too.
@kbobdonahue1966 Жыл бұрын
Will it play mp3 discs?
@zx8401ztv3 жыл бұрын
Now that did supprise me, do you think the laser home switch was the actual one causing the problem? Make sure the word SONY is the first thing anyone sees.
@johnnelson93493 жыл бұрын
My CDP-CE335 jams. A disc will hop out of its tray and wind up on top of its neighbor, jamming the player. Intermittent occurrence. Any ideas?
@12voltvids3 жыл бұрын
Check the disk clamp. The double sided tape used to hold the felt ring sometimes leaches through and makes it sticky. Then when the spindle drops to change disks the disk sticks to the clamp, the tray rotates and now you have 2 discs jammed.