Auction 2017 Ford F350 Rebuild Part 16

Patreon - / junkyarddave
Instagram - / junkyard.dave
*Send Me Fan Mail*
David Nenno
PO BOX 9352
Pueblo, CO 81008

[@r1eaterr]

In true Junkyard Dave fashion, you drive your build with 38% of the body panels installed. At least you had a windshield this time. Lol

[@kickit59]

Many years ago I was restoring a 70 442 Convertible! The whole nose was off, doors & trunk lid were off & we had cut off the quarter panels to replace them. Also the interior was stripped out. Basically a firewall & a floorpan with an engine & radiator up front. I wanted to take the car to the pressure washing business across town from my shop to get the engine steam cleaned. So I sat on a wooden apple box & drove it there when I arrived at the steam cleaners the local city policeman pulled in behind me. I didn't get a ticket out of it but the policeman said if he didn't see the car leave on a trailer or towing unit that there would be hell to pay!

[@hammertimee777]

in junkyard dave fashion, he drives them on four spare tires !!!

[@abrahamsalcido9174]

Nice job Dave Comming right along. What an accomplishment .

[@bluheat007]

Man the truck looks and sounds awesome. I do believe when you put that bed on, that passenger window will work. Keep up the good work.

[@n84434]

Gas Station Burnout FTW!! Fantastic Dave... I had to rip through it to see the launch, but I'll rewatch it on the way home today...

[@Junkyard_Dave]

Awsome thanks 🤗

[@brianbichanich8541]

That's what I was wondering to turn the front rims the right way and they probably would shine like the back ones

[@bounderchris]

Lol I got a notification I got a heart from junkyard Dave... and I’m sitting there going what did I write?? So I just went through every comment and reply and I never wrote a thing, but got a heart!

[@vettepicking]

most times when a power window isn't working from one side its the wires running to the other door are broken or the pins are mixed up/broken in the door jam . also the second issue is the master switch on the driver door is bad or dirty... Advanced mobile power window repair.

[@tristrambarr6322]

Love the rip and love the sound of the 67 with that big straight pipe

[@jvvader]

You wouldn't make it a mile in California with that truck and the cops would have you pulled over checking registration, insurance, and modifications...it would be on a hook going to the impound lot! You don't know how good you got it! Love it.

[@Junkyard_Dave]

I made it all over with my straight piped f250 lol

[@hammertimee777]

@@Junkyard_Dave hey TJ, i mean JYD, u got the most street cred here because u literally built this truck nut by nut lol

[@Junkyard_Dave]

@@hammertimee777 😁 tight lol

[@jvvader]

They are all in our business on the left coast, diesel is $3.95 a gallon. They are looking to find ways to tax , license or fine us all the time.

[@trinkladd]

Fuck comifornia. Only illegals and lgbt are welcome ther. Illegals have ruined along with all the liberal mentally unstable politicians. All tax dollars used to support illegal criminals while us citizens go hungry and homeless. Shame. The good Californians have no voice now there fucked. Get out and vote folks

[@Wallie2004]

Getting rowdy in the gas station lot. Lol love that you left the wheels on backwards lol

[@subiesnail5857]

It’s coming out awesome. Can’t wait to see the finish product.

[@robertsimmons3556]

Good to see your first test hop was uneventful....shows your attention to detail. Great Job!

[@d.j.9961]

When you go look at the other lariat's, SNAP ALOT OF PICS TO REFER TO WHEN YOU GET BACK TO THE GARAGE!

[@alleybuilds5370]

so much power !!! you did a burnout at like 1000 RPM'S love it!

[@joe13glover]

Going to sound a bit odd but the best wheel cleaner is toilet bowl cleaner. Mix the lysol cleaner 50/50 with water, let it sit for maybe a few minutes and rinse. heavy stuff will require a second dose and some elbow greese but I am telling you the stuff works. BTW love the build vids keep em' coming.

[@alpinesubx]

Nice job man, can’t wait to see it finished keep it up!!

[@ambroselake9156]

fantastic way to end a video thanks jd

[@willr69420]

Thanks for the update! You're making progress, keep up the good work!

[@raymondproseus6923]

That thumbnail is legit!

[@RODZILLA65]

Wont be long now! Looking real nice Dave!

[@Edenssunlight]

Lmao 4:02 "I'll put a little icing on it" classic!

[@Superduty_59]

That truck is Bad AF Dave!! Can't wait to see the bed on.

[@brandonquesnelle7228]

Such a sweet tow rig. Gotta bring that thing and the G down to Texas this year

[@Junkyard_Dave]

Maybe

[@planesmoreplanes5285]

Glad to see that the truck is a alive dave lovely truck

[@trevorsheppard157]

Gettin me all pumped up bro!! WOOOO! Ready to see this thing finished!!

[@ericl3936]

Sounds awesome. Nice job dave. Cant wait to see it all together

[@number1STEELERBOYZ]

Love the truck David! Nice gas station burnout also!

[@ekemini12435]

Liked the transition into the ending. It was dope.

[@gethinjones1348]

Great video Dave, loved the wheelspin at the end!

[@kluckfabrication5991]

Thinking once you get all the circuits plug in that should make the windows work, if your having issue with your touch screen inputs you may want to pull the radio and dielectric spray the connects to reset them.

[@JamonBoi]

Damn, you’re lucky Bro. She ain’t even all put back together and she looks bad AF! Congrats on your buy and rebuild.

[@jimmyaber5920]

That truck is fully networked. When some modules are unplugged, the ones with terminating resistors, it will shut down that network. The people earlier that mentioned the module for bed were sending you the right way to go.

[@The33TIGGER33]

Did you fix the ground wire you broke when lifting the cap off.

[@PanameraTurboSEHybrid]

Wow, I'm impressed. Man I just love that color!

[@moostang09]

Thanks for doing that burnout on the live stream!! 🙌🏻

[@Junkyard_Dave]

It loves burnouts lol

[@shaidensmillie2218]

thats so sick man, good work on the build

[@leedavies9309]

great video nice to see it go on its own steam

[@sweettee3647]

That's funny. I saw a older 4 door olds Cutlass Ciara. It was white with a tan cloth top. And there was Cadillac signs on the side of c Piller.

[@timothypatterson619]

Awsum to see it going. Congratulations

[@greenmountainsuriving]

finally puttin down rubber that was the longest weekend ever lol jk love this build Dave thanks from Sean Athens, Vt

[@brucehoard8240]

Great videos....Wondered if the electrical issues might be that ground strap that broke when pulling the cab? Did you replace it.?

[@81recinos]

I'm so happy for you my friend

[@piperdoug428]

Bigger test to break er loose with the duals on, i was worried ye pinched a wire when setting the cab back down, check the loop polarity between the 2 doors maybe?

[@Dan-xs1il]

Great work! I wish you would clean those olde stickers off the back two door windows though.

[@fakomaksi2400]

Love that build

[@teeg3275]

Trucks comin along good Dave! Good job man

[@Junkyard_Dave]

Thanks

[@mikenoss9411]

Seems my Truck had the same problem I replaced the window motor and now it works smooth.

[@binkydamauler]

love that truck, Buddy!

[@kickit59]

Dave your new truck sounds amazing & does awesome burnoffs! Another day or two & she will be done! Looking forward to seeing the finished product! How good did the paintless dent repair turn out? Was is perfect or just close? I have never used a PDR service before so I am curious about what they can do! Thanks for the excellent content & video!

[@GK7GARAGE]

I just have a quick question, did this build come up to be cost effective?? Thanks

[@mrmiscast]

My wife asked why you'd spin those tires, or why anyone would do such a thing. I mean she gets it at the drag races to heat the tires up, etc... I told her you had to make sure those tires were concentric. And that later on, you did the same to the other tires. Gotta get that nice smooth ride from those perfectly round tires ya know... She almost bought that explanation... Very nice paintwork on the hood and fenders by the way... Getting closer to Done...

[@Junkyard_Dave]

Lol

[@Steezypleasy]

I don't get it, why not tell her it is for fun?

[@mountainviews5025]

Awesome truck thanks for the videos

[@D_I_Y_DETAILING]

Damn that truck sounds good its def a beast i dig ur brake light set up hahaha

[@chrisbyers386]

have u check cab to frame ground

[@robertevans6481]

She rocks....

[@haziqish5350]

Nice burnout 🤘 all lot of freedom

[@colinblankenship2401]

Thanks for sharing. Save the tires you never know when your going to need them.lol

[@dennisnewell4411]

When you first took off the cab you broke a little. Groud wire did you connect it.

[@postmaster505012]

All that work and already trying to tear shit up...

[@samkobasic]

Ever fix that ground that you broke on the passenger side? Maybe partial electrical issue?

[@xbrod7827]

Why have you got the front wheels on inside out dave

[@SGAS100]

Would be curious as to how much you have in total in this rebuild...less the upgrades...compared to the trucks acv

[@ncron1109]

Is the automatic window down and up working from the passenger side if it's not it needs to be programmed and then it should work from the drivers door

[@foxrace0985]

This is an old video but did you fix that ground strap you broke?

[@dennismoody8140]

Did you fix the ground wire under the Passenger door

[@klpecoraro4]

Nice burnout how many people did you make mad at the gas station. Oh and still can wait to see how she looks after everything is done

[@carrolljohn91]

So how much are in for on this build

[@alanbrooks2108]

Did you fix the ground strap on the frame ?

[@jaydubya83]

The racing "in Mexico" clip should have been longer lol. But it looked like it didnt want no part of the 350 lol

[@juan.rcastillo9738]

👍👍👍te está quedando con madres 👍👍👍👍👍

[@christopherpatrick1061]

Great job Dave great work you don't play around . Motivate Trevor to fix the Civic please ..

[@bradymatheson9518]

With these brand new fords if you don’t have the tail lights and all the harnesses plugged in this is what happens also. But the radio will also not turn down but will turn up, only reason I know this is because I install flatbeds and I spent 2 weeks on a single truck over it

[@tommyrobblee9391]

My car had an issue with the window switches. Turned out to be pinched wiring between my door and hinge side jamb from the door opening and closing

[@joel4491]

You're in Denver aren't you it looks pretty nice out for January

[@erikturner8687]

Is that truck insured and tagged?

[@timmyminton7774]

Why do the front tires stick out so far are they on backwards Dave our am I just to high

[@robbysemrau3252]

Why are the front wheels on backwards

[@glennplumbe7815]

Sweet ride Dave gee Trevors Kid is getting cute i bet she is a hand full for mum LOL.

[@AngelRodriguez-oo5ht]

Could the issue be that ground wire you broke when you took the cab off?!

[@kallenhunstiger7970]

At what point are you going to put the wheels on the right way?

[@jamesl5010]

Did you fix the cab ground wire? That can cause some funky issues! Nice job kid, you do good work! Keep the videos coming!

[@Garth2011]

A couple vids back, you asked about "with or without the muffler". Seems too loud for putting around...I'd put the muffler on that came with the Jamo and give it a chance to impress. If it's been tested to flow a good deal, it won't hurt any while you enjoy some of the late model Ford quiet features for other things. Today's high flow exhaust systems do so much more without the noise. Regarding your fuse boxes under the hood and elsewhere, not all of them are going to have empty sockets, without the terminals in them, that are not used. Some will but many will not have a fuse. Best to find a Lariat or similarly equipped 2017 as yours and take some pictures of the fuse boxes throughout the vehicle for "possible" reference. Good job on the dentless repair.

[@Junkyard_Dave]

I'm gonna do a video soon to compare them

[@klyonsden]

I have a 1999 ford f250 7.3l (she was built as a hot shot, but, owner died before delivery). Just spent a lot of $$$ to have her engine opened up, standard 6 tranny opened up, replace all turbo seals, and opened rear end. Even had a total new paint job done. Why? because I love this truck, and, it was easier to have her gone thru (fixin to tow a 5th wheel RV all over America full time) with 10k vs 80k new. Also, no DEF and minor computer in it. The question I have is, I purchased the Friction fluid you talked about. Should I also use Sticktion fluid as well? Still blows my mind that this kid I am watching just built an f350 basically.

[@jgutie4377]

Has anyone used that iron fall out mentioned at 12:24? My Alcoa wheels look like the ones on Dave's driver side.

[@Eddie54013]

You need quad beam led light looks nice [ ]😍

[@rottenseed02]

Lets get this baby done!

[@Junkyard_Dave]

Trying

[@bennymathew8531]

Where in texas are you from

[@davidbrickey5925]

People are touchy about your wheels . when a person working on something they got to do what they got to do.

[@victordelrosario6277]

Hi, I'm new to your channel and I love what you do but I have a question. and is that if you know someone who can do what you do and send it to other countries and if you do it based on budget

[@dproudveteran7001]

the truck has come along way but i think it looks goofy with the front wheels turned around like that

[@blazerich3332]

Notification squad where you at

[@hydrazombie]

10:24 ford is going to see that fancy under hood clear coat paint and offer it as an option to all there new trucks, thank for giving them more ideas on how to stick it to the consumer for more added options a 50 thousand dollar truck just went to 60 + thousand more dollars ;-)

[@ajj2926]

Loose or bad ground

[@kodystclair9774]

Ha the dot numbers lol its was a leased on truck the driver was moving. Don't see how airbags didn't go off

[@CalgaryRambler]

Awesome job roll coal roll coal roll coal !!!!!! Soon that truck will be complete looking forward to seeing the final final finish job

[@DeezNuts-sx9jd]

Nice

[@Hardcore_flat_four]

Almost 30k subs... 🤟

[@Junkyard_Dave]

I'm pumped

[@6door6four96]

Those are 2008-2010 mats I have the exact set in my 08

[@fxr1991hd]

Have to ask, why are you running the rims/tires backwards?

[@dannyantrim3546]

He Is Lucky's another state California would have is ass prison

[@Glex25]

I believe he said in a previous video so it would be easier to reach suspension and brake components

[@Fordman7575]

@@Glex25 That may have been true when he was working on it. But now all the suspension and brakes are back in place. Driving it like that is just going to put more abuse on the front hub bearings.

[@Hardcore_flat_four]

Whats up on some RX7 content?