🇵🇭 Audi Q7 Check Engine Light. Intake Manifold Runner Stucked Closed.Solved!!!

#intakemanifold #runner #intake #stuckedclose #checkenginelight #checkengine #edralinbustalinio #mcbautomo #eddexpert #check engine light unable to erase because of permanent dtc which is intake manifold control runner. everything is possible to repair if you will utilize your full knowledge in automotive industry.. if you won't have patience, you will not gain your success. gain more experience to acknowledge your reputation...never give up..

[@drm4857]

Great video, thanks

[@edralinbustaliniomcbautomo7707]

Glad you liked it!

[@vadym8581]

I have the same problem with b8.5 s4 after about 20 min warming up driving the car it gains so much more power and codes disappear any idea what it is??

[@edralinbustaliniomcbautomo7707]

May i know the fault codes what does it mean? Its depends on the fault codes to identify your complain

[@sirdaddybigboss]

kabayan, my CEL light came on. Scanned and its the same issue. code p0662. Ang problema fully book ang dealer so in 2 weeks pa and timing na may 300miles road trip ako. Safe to drive ba for the mean time? 2018 audi s3

[@edralinbustaliniomcbautomo7707]

Yes it's safe to drive, you may continue your journey ✨️

[@dukeofawesomeness5252]

What did you do to make the intake runner actuator move?

[@edralinbustaliniomcbautomo7707]

Actually it was repaired 8n other garagr and i was found out the runner was stucked up and created fault codes.

[@dizchick_29musicchannel11]

Kuya where is your garage? I hve the same issue with my audi a5 bank 1 and bank 2

[@edralinbustaliniomcbautomo7707]

Your location please in order i can reach you that is possibility to us.

[@robertkhan386]

How Much the labour charge for this service ?

[@edralinbustaliniomcbautomo7707]

It depends on the problem plus programming.

[@agustincorrea3244]

I have a leak on my 2009 Q7 3.6 and it still has a leak after 2 new oem Valve covers.

[@edralinbustaliniomcbautomo7707]

Leak is"nt a big problem. Not properly check the leak where it was.

[@aajinah]

i have a q7 2013 and i have the same problem. what i did was i only moved the intake flaps manually and make sure that the flaps are not stuck internally. but the error keeps happening. Any idea of what shall i check?

[@edralinbustaliniomcbautomo7707]

Replace the whole intake manifold, why, out of mm creates dtc, very sensitive digitalize sensor. Or if you can buy a an adaptor attach to the vacuum diagram to prevent pre play.

[@meemrealtypartners1740]

Are u in Dubai

[@edralinbustaliniomcbautomo7707]

Yes I'm in Dubai but I'm out of the city right now.

[@alamerisable]

Where is your shop?

[@edralinbustaliniomcbautomo7707]

Ur location

[@otgonlkhagva8706]

How to clean buttrlerfly area?

[@edralinbustaliniomcbautomo7707]

Just spray an ac delco carburator cleaner. It his helpful to get rid of carbon deposits. Do not attempt to push the butterfly in order not to change the engine idle,otherwise, you need to relearn the throttle body with a scan tool. By doing this cleaning, the engine should be off, ignitiin off.

[@jaketran1996]

Can I drive my q7 with this issue temporarily on the highway ?

[@edralinbustaliniomcbautomo7707]

Yes it's driveable only it will annoyed you the epc lights up... it doesn't give a big issue on driving.

[@jaketran1996]

@@edralinbustaliniomcbautomo7707 thanks for the response

[@kevinwonsetler3777]

Where do I hook vacuum to test?

[@tariqshanti1721]

Where is your garage located bro ?

[@edralinbustaliniomcbautomo7707]

Im in Dubai UaE

[@tariqshanti1721]

@@edralinbustaliniomcbautomo7707 excat location of work shop or garage name i am in Dubai