Audio Mixer into iPhone or Android for Live Stream - Easy Tutorial

[@JasonWelchMusic]

Perfect!...precise, to the point, no mumbling, no rambling, no obnoxious music... YOU ARE MY NEW KZbin HERO!...lol... thanks brother for the help. Blessings to you and yours in Jesus Name.

[@WorshiptheKingMusic]

Thank you for the mind comment! Blessings.

[@veljkozivkovic9540]

does it work on i phone 7plus when i turn on the headset plug does it turn on my bluetooth should i turn off the bluetooth or not??

[@christcentralglobal]

​@@veljkozivkovic9540I have same issue, does anybody have a solution to this

[@LoriGraceAz]

Super easy. I've been searching for something like this and most people won't show where every cables go. The amount of adapters required is crazy but that's the way you gotta do it. Thank you for doing this!

[@WorshiptheKingMusic]

You are welcome.

[@ladymell1116]

Thanks for this tutorial!!! Can you recommend an app to check the audio input level for Android please? Thanks again! God Bless!!!

[@safedangerband]

This was extremely helpful and saved me from spending around 400 bucks on the iRig Quattro plus this mixer I can take to smaller gigs or rehearsals and record/stream them with ease for around 100-150 bucks for a used MG10XU. I had no idea they sold those adapters to knock the level down enough for the iPhone to handle it. This is great, thanks a ton!!

[@pedroluna7347]

I need to use my mixer with effects to stream video and audio to google meet music teaching sessions. Will this setup you have, similar to mine? I have the sound craft fx12 mixer.

[@blayclement9067]

Thanks very much sir, please am using Android phone, please which cables should I get to record good audio sound from my church mixer to my phone

[@kerrybowers865]

Great video, as always, just want to confirm the plug style with you preparatory to using the same for my church. It appears that you are using a y-cord with left/right, 1/4", TS, male plugs to send a stereo output from a Yamaha MG10 to a 3.5mm TRS male plug. That 3.5mm TRS is then inserted in the female end of the Headset Buddy with a TRRS male plug on the opposite end. That TRRS plug is then inserted in the iPhone or connected to a dongle for use with a lightning plug. I appreciate all you do to serve the Lord and those trying the do the same through technology. Blessings!

[@dradelalma]

thank you so much! what is the name of the app? buzz jack?

[@ChinhNguyen-bg4tz]

Great video, Thank you. What is the App to chech audio input level you are using? Any app that you recommend for Android phone?

[@32NinerBravo]

I can’t thank you enough for this tutorial. I’ve been wanting to do this and also been looking at that exact Yamaha board for my set up anyway. Now I know I will definitely get that mixer board.

[@WorshiptheKingMusic]

Great sounds awesome thanks for letting me know im glad it helped you

[@TheGHTLoveFamily]

You have given me the closest video to a simple set up. The only thing is the clarity of which cables go where. It was kind of scattered so it would help to know EXACTLY what goes where.

[@WorshiptheKingMusic]

Oxlen Music ok. Tomorrow I’ll make a diagram of this setup and add it to my site downloads. Here is the link to the page. Check back in about 24 hours. worshiptheking.com/shop-digital-downloads/

[@qlgc2024]

Thank you sooooooo much! I’m a real amateur who just want to do hymns on livestream.

[@RQTV]

Whats the exact name of that 20 dollar blue cable headset?

[@philmadeira6303]

Thanks! Our band The Ascendants will make use of your great suggestions!

[@aldelios]

Great video ! Racking my brain trying to figure out the whole 3 ring versus two ring audio cable

[@annebella1794]

Hello, nice explanation. My question is why is there noise towards the end of the video? Is it because you changed the headset buddy?

[@joerobassa5993]

Thank You Can’t wait to try all this , i’m a solo singer guitarist usually recording live gigs on my iphone sadly the problem i have is it captures my wife’s voice and friends on a distant table , making it difficult to share my videos depending on the conversations going on as they entertain and have a good time lol 😂 Thank you so much , hopefully I can get this happening and solve my audio recording dilemma.. Regards Joe 🎶

[@nealhoward1674]

THANK YOU!!! Since you can't hear what you sound like to the people watching your live show, if you recorded yourself to your phone and played that video back for yourself on your phone, would that be a good idea of what your viewing audience would hear? Also, what's the best way to get backing tracks into your mix?

[@Talia_IceCreamPaints]

Sounds like a great idea to me. Have you tried it? If so, what results did you have?

[@johnloo1136]

Use a entrance box. It’s cost $499 but worth it, and you don’t even need a mixer

[@russianbabybear9600]

I love you man. You have contributed to my success

[@WorshiptheKingMusic]

Thank you!

[@tcttvradio]

If people don’t have reduction adapters they can just turn the gain right down on the mixer to send a similar mic signal.

[@spider679]

Thanks buddy..can I do this on live band? Will the sound be perfect?

[@dannysvinylrainbow4852]

Awesome video thank you for posting I have a question, I want to record a video on my iPhone XR of a dj set with audio from mixer to directly to phone. While using the iPhones video record. Thank you:)

[@WorshiptheKingMusic]

yes you could..... us the audio input mehtod and then use your camera video.. does that make sense.

[@imranshareef4754]

Very thorough explanation step by step & easy to follow. Thanks is their an equivalent app for android users ?

[@MiNiMeMiniatureDrumCovers]

I have always noticed the similarities in theme music and camera shots in commando and 48hours but didn’t know made by same person , So now makes more sense

[@Ciganyfiu]

Great video. Would it work just by using the mixer’s USB out direct to iPhone using the camera connection kit?

[@WorshiptheKingMusic]

That’s a good question? I think this way will work better though.

[@luigigalassi801]

Hello, I like your video can you please I like to know is the your Yamaha mixer is power or not power Thank you.

[@caleyhall]

You didn’t do stereo out, you did TS out which is unbalanced.. those ts cables combine the stereo sound to a single source.. which is fine.

[@israelmatthew6983]

Thank you so much. This video is really really helpful. What did you say the app to download on my iPhone to check the audio input level is again sir?

[@WorshiptheKingMusic]

Hey , its boss jock jr

[@Uncle_Gray]

Nice setup But am I right to assuming that TRRS has only one mic input which means only mono signal is available eventually

[@anwarferdaus8167]

Thanks for your lesson. How do you spell the app?

[@WorshiptheKingMusic]

bossjock jr

[@xxH0llyw00Dxx]

I was going to ask the same question because I can’t find it in the App Store. Is there an alternative app?

[@TicoStudio90]

​@@WorshiptheKingMusic Thank you for the video. Can you please tell me the exact name/specifications of the long lead from the mixer to the headset buddy... And the short white lead that goes from the headset buddy into the phone 😊

[@garudasomanna]

Thanks for this video. I have watched it because I have this workflow: I use Shure’s PGA31 wireless headset to deliver sermons in church. The device’s receiver is connected to the mixer for the audio to be heard in the Church’s speakers. I have with me iRig and I want to know how to record my audio into my iPhone/ iPad? Can you please help me? I have subscribed😀

[@WorshiptheKingMusic]

Yes, you would come off a output of your mixer into your iphone.... that could be done..... use an aux out or just a monitor or stereo output off your board, into your iphone... you may want to use a headset buddy for that as well... but it can be done.

[@chrysannmoore799]

Thank you for this!! If I had only seen this sooner!! God bless you for sharing this information!!

[@love4lyfe51]

How did you get it to work with FB live? when I live stream in Facebook, the recorded sound is from the phone mic. It simply bypasses the plugged in adapter from the mixer.

[@kenhawk6448]

I'm going to try this. I downloaded that app and purchased the Rode SC4 adapter, which I found on eBay. I own a radio station and am trying to get mixer audio for remote real-time live broadcasts through the phone so it can be broadcast on-air. I'll let you know of the outcome.

[@clearosemusic]

How did it turn out? I still can't seem to find a solution to the noise on the audio signal when using mobile data

[@topherbopher5350]

Thanks for your video! I noticed while doing this, I still get audio from my phone in addition to the mics. How do I only grab audio from the mics and not from the phone?

[@sheskimusic]

The best vid on the subject. I’ve seen MANY!

[@richiesanta2615]

What did you say the white cable connecting to the phone was called. Saw something on Amazon. is this it. Apple Lightning to 3.5 mm Headphone Jack Adapter. Sorry for all the questions

[@haybeecay]

Thank you for this video, I have a mixer amp carlsbro cdx 8-2 and Irig, I do live stream with my band(gospel), I use Samsung S9 and connect the Irig but I still don't get quality audio, pls can you guide me on which port I should put the jack to jack cable that goes into the irig

[@WorshiptheKingMusic]

maybe, just check your audio levels going in.... are you getting good solid not overloaded signal into the device... overload is usually a big problem.

[@robertoakhbari7168]

Big thanks to you. Your video helped me and solved my problem with input buzz. Awesome work. I like and subscribe 🤘🏽🙏🏽

[@oderinwaledaniel2492]

Great Stuff you're doing. Quick question tho. What's the cable you plugged into the mixer called? I searched for "3.5mm twin audio recording cable" online but I mostly came across "twin female". Kindly help with this. Thanks.

[@2001marnel]

What kind of application mic. Test you have

[@mohamadmusicom]

Thank you for the explanation. I have a question. Does the phone send sound to the mixer? I mean, it exchanges sound in this way The phone only receives sound

[@greaterholytemplemusicdepa5108]

I appreciate this video. Can you do a video using the iRig Stream to iPad? I want to play the keyboard and sing in my Rode Wireless Go mic. Can you include how to use the Loopback so I can also use Backing Tracks that are on the same iPad I'm using for Livestream. If you can, I'd appreciate it!

[@WorshiptheKingMusic]

oh man... that's a big order.... I dont think you can do that. I think youll have to have two ipads... one to do the stream and the other to play the tracks.... or better yet, use a full mixer setup like I do then into the ipad to the stream.... check out some of my diagrams worshiptheking.com/wtk-shop/wtkdownloads/

[@vikvalor]

This is an incredibly helpful video, thank you! Question: Do you know how this would work if you wanted to Duet something on TikTok? I would like to be able to duet my vocals over another creators beat using my XLR microphone. I feel like it is a similar setup to this but not sure how it works getting the original TikTok's sound to come through?

[@arondeclercq]

Good video! But where is the link for that TRS to TRRS quality kabel?

[@borisshaulov3531]

Can you show how to control what audio input is being used in Facebook Livestream? Also curious how to control the audio levels outside the mixer? For instance, let's say the audio in church sounds good, I don't want to turn down the mic, but the input in the iphone is too high. Can you adjust the input level another way?

[@ehmilenhanceideas1262]

Good day. Which Yamaha Mixer you are using please

[@WorshiptheKingMusic]

Let me check.... Here is mine kzbin.info/www/bejne/hnPCepV6hpqiapo

[@tinybeat4507]

Hi! The Rode adapter you are showing in the video say it’s TRRS to TRS… is it really correct? The headset buddy does the opposite if I understood… so I’m confused…Many many thanks! 🙏🏻

[@wandadejesus4144]

Have you link the items you are using to mix: all cables, etc.

[@stephrazado]

Does this only work as an output? Will i be able to hear my phone’s audio s well for example on Zoom?

[@rayonellis8979]

Thanks much for this is it the same pattern for an android phone????

[@manikdesilva1]

Hey great review. Would be great if you can test on an iPad Pro (USB C). I am not able to get the setup to work on the iPad Pro. No problems using iPhone .

[@WorshiptheKingMusic]

Manik Desilva that seems strange. Maybe I’ll give it a go on my iPad Pro

[@manikdesilva1]

@@WorshiptheKingMusic I think the Apple usbc to 3.5 dongle is causing the issue .

[@C1pherSix]

The method in this video uses the mic input on the iOS device and is NOT stereo. I found a better solution is to use the Apple "Lightning to USB 3 Camera Adapter". You plug the USB port of this adapter into the USB port on your mixer and the lightning connector to your iOS device. Here are the benefits: - Digital line-level signal into the iPhone/iPad (no worry about low or hot signal levels) - Stereo audio recording in the iOS camera app (the line-in is chosen automatically) - iOS device can charge with the optional connection of a power cable (lightning) for long sessions - USB audio connection is bi-directional, meaning after receiving audio from your mixer to record, the playback goes back to the mixer without the need to change any cables

[@s-k-y-e1833]

what if i dont have usb input to my mixer

[@wilsonyepesmild4713]

Great. Am trying to set up instruments for live video's. Kindly help me out. All I have is a table now and looking for the best and simple tools to acquire

[@ar5600]

This video made me to understand fully.Sir if i want to make my music play on my live stream should I just on my video player on phone and adjust the tune using the audio mixer.Is that hw it works?

[@j.g.8540]

Would this work in clubhouse or twitter spaces where you can hear people talking back to you? Thanks for this. I appreciate how you explain everything. Great video!

[@WorshiptheKingMusic]

Maybe it could yeah if you added headphones and a line back to your. I’ve done a setup like that.

[@j.g.8540]

@@WorshiptheKingMusic Thanks. I failed with the iRig and this totally worked. Thanks for sharing your video! You rule!

[@OurBackwoodsHomestead]

Great video! my mixer is a Yamaha Stagepass 600 it only has 1/4 inch outs for the mains....I'm wanting to stream live in a venue as well as online. Could I split the single with Y cables and hookup my speakers like normal then use the other Y input to my phone?

[@regar007]

Very informative. Thanks a lot for sharing. Question - I am using same mixer and I would like to use my phone to send the track with the use of bluetooth, how can I make mixer bluetooth?

[@WorshiptheKingMusic]

I dont think that works... unless you buy a bluetooth receiver thing

[@pagonzale]

Hello thank you for all your good information a question I tried this set up with iPhone 15 pro that has usb-c cable and did not work. It works with my iPhone 11 that uses lightning cable can you suggest something thank you

[@eurocafeduo]

Great ideas. If I am using a Roland Go;mixer pro, I don’t have to do any of this right? I guess I could check my levels with that app though. What do you think?

[@WorshiptheKingMusic]

I think you will still have to mute your iphone audio or you can get a echo... but year its very easy to make sure it sounds right.

[@eurocafeduo]

@@WorshiptheKingMusic good point, so it doesn’t automatically mute when you hook up the iPad?

[@WorshiptheKingMusic]

not that ive seen

[@ryan_cross]

Thanks for the video!! I am looking to improve the audio quality of my livestreams and am wondering if you could help me. My setup is my mic, guitar and keyboard plugged into my audio interface and being processed in Logic Pro X (EQ, Compression and Reverb). I then want to send the processed audio out of my interface and into my phone for live-streaming/better camera audio. Do you know how to connect my audio interface's line/headphone output to my phone? Your help would be much appreciated!! Thanks Ryan

[@WorshiptheKingMusic]

Yeah you could use the output form the interface or the headphone output into your phone. Better the main studio outputs. That’s what we do. Form the back of the scarlet we use the outputs into the live stream

[@JaredBullerMusic]

@@WorshiptheKingMusic Hello sir. Just to confirm. The reason why you run the mixer audio from the L/R monitor outputs is to get stereo, correct? And running the audio directly from the interface's headphones jack will only give me mono, correct? Thankyou.

[@BakerBaker1-9]

Thanks- I just acquired the Mackie pro6 fx3 - I have an Android . I Want to record songs for YT - any help ?? - God bless indeed 👍

[@richiesanta2615]

thanks for sharing your knowledge . I pretty much got it but i would like to sing to my tracks on my i pad. How do i make the music sound as good as my vocals for the people that are listening. Im guessing i have to patch it into the board. What wire should i use. I currently run a 1/4 inch to phone jack when playing it through my PA. Thank you

[@colinhebditch5324]

Hi . Can you tell me if I am able to hear my guitar and singing through speakers as monitors so I can hear exactly what I'm hearing

[@piptvofficial]

how to use your mac with yamaha mixer for music background while ur using android for streaming? any help, thank you

[@Jiban_Katha]

What about sometimes imputed level goes up and down, like we broadcasting live church

[@JamesDavisIV]

Does the RODE SC4 do any attenuating, or is that just the Headphone Buddy? I've got all these pieces on order but would like to return what I don't need. I've got a 20ft 1/4" to 1/8" headphone cable (two rings on each), going into the SC4 or Headphone buddy, into a TRRS compatible lighting adapter into an iPhone 11. Will I notice a difference in bossjock jr when switching between the RODE SC4 & Headphone Buddy? For those who care, a headphone cable (two rings) into a TRRS compatible lightning adapter doesn't work. Bossjock JR didn't recognize it as an input. Thank you for the no nonsense video, this was incredibly helpful and I can't wait to make some IG reels with a real mix!! Cheers

[@6ocram]

Were you able to get attenuation with the RODE SC4 adapter? I want to forward a mix from a Tuga AM4 through RCA to 3.5mm cable to iphone in order to use it in a TikTok Live.

[@itsmickeyyoung]

Hey! Thanks for this. So you played it back and got a stereo mix correct? I’m assuming you did but I wanted to ask. Will be streaming to Instagram more than Facebook Live.

[@WorshiptheKingMusic]

Yeah you can do stereo.

[@miscgloryofficial4527]

so if your recording the minister via an iphone (due to lack of funds/equipment lol), instead of the iphones mic picking up the whole room, this set up allows the piano/speakers mic to come directly out of the mixer and override this and give you a clear sound from mic and piano thats plugged into Mixer???????? Like their videos have that awful sound thats picked up from the iphone only as they record there services (I have to advise someone from afar, who is older, and may not understand too much technical deatils - but your video looks easy to me, hence my question).

[@WorshiptheKingMusic]

right... you can use a small mixer to mix the stuff together then send it into the iphone and get a clean sound.

[@haiduongbeauty5268]

What app you dawn load to check the sound Sr.

[@viplivesmatter]

Hi man, I ha e a Rode USB microphone: is not enough? Should I use a mixer to sound like radio speaker?

[@WorshiptheKingMusic]

The radio mic sound comes really in the compression.

[@viplivesmatter]

@@WorshiptheKingMusic Oh, great!!! I must remember this lesson❤️ Thanks 🙏

[@foothilltkd]

what model is your mixer? I am searching for a mixer that I can use for podcasting, postproduction, and etc..I know there are many mixers on amazon, and each they vary in prices, I looking for a mixer and connect toa iphone,, yes inlcluding bluetooth connection, but after listenin u can get static, buzzing noises, I thought it may be the aging mixer, that was when i Used my android phone, no wwith the iphoone, because it lacks a audio jack, it creates big++ormat to wav, it sounds more clear and concise, anyways, what is the nbest sound outpu6?

[@readheadcopy]

Are there some modern solutions to stream straight through USB-c

[@ilikepizza137]

The headphone buddy site says it doesn't work with the apple lightning adapter, but it looks like it works just fine for you. Did you have any trouble?

[@MyShayCo]

Are you familiar. With movie Pro App I m struggling with audio distortion Thank you for video

[@djmaster1110]

Is the RCA Output not set for record with TRS JAck ?

[@danielrickettsmusic]

I’m experiencing a hissing noise when I use either the headset buddy or just a TRS to TRRS adapter… I have both, but both have the hissing noise in the background. I’m recording into an iPhone 13, but also my iPad experiences the same hissing noise. I suppose I could be my iPhone lightning to audio adapter but I’m doubting that. Any thoughts? Do you experience a hissing noise? Like I can still record music, but if there’s any silence, you can hear the Hiss

[@drewdwn87]

Did you figure out the hissing/static sound I’m having the same issue I’m kinda getting the same soud as his in the beginning of his video

[@danielrickettsmusic]

@@drewdwn87 I haven’t found a remedy to completely take it away, but the best thing I have found to do is to turn my audio input (The audio that’s going into the iPhone/headset buddy) up a little more so that when playing back the music I don’t have to turn the volume up on my iPhone very much to listen to it. If the audio input is low, I would have to turn up the iPhone volume up and I would hear the hissing more. I hope that helps

[@drewdwn87]

@@danielrickettsmusic thanks for that info..I actually bought a lightning to usb3 camera adapter from apple and just plug into the back of the board to my iPhone and it solved my issue.

[@danielrickettsmusic]

@@drewdwn87 Oh good call! I think I might have one of those and I should try that.

[@nachoquirarte]

Hi! Great video, thanks for sharing. I have a question, when you do the livestream on facebook or IG with this procedure, is it Stereo? Cause I'm not being able to do it Stereo, I don't know if it's posible. Thanks!

[@WorshiptheKingMusic]

I actually dont think they support stereo .

[@simonsmith2642]

So, could I come out of my interface to iPhone instead of a mixer? We mix “in the DAW” and want to use that audio with the iPhone camera.

[@JorgeBarnet]

Thanks for your posting. Is this mixer USB powered?

[@WorshiptheKingMusic]

not this one

[@Milly-gf4jj]

Is there a way I can send audio from a separate phone playing Spotify to my other phone that’s streaming? Thanks

[@williamcruz2722]

My church has a samsung tablet and i'm trying to connect from my mixer to the tablet, i ordered a trrs splitter with headphone and mike inputs but i don't know what app to download to check the sound level. Can you please advise, Thank you!

[@fikou1185]

Hi, thanks for the tutorial, this helped me alot. Im using the smartrig 2 to connect from my mixer to my android phone. It Works perfectly but there's alot of noise on the background. Do you have any tips to get rid of the humming sound?

[@WorshiptheKingMusic]

Get better shorter cables. Maybe use a hum eliminator. That’s what I did in one setup.

[@Undisputeddjcollins]

WhAts the name of the app I need to download on my iPhone

[@Mirovlitis]

This is exactly what I want to get audio from the console on my mobile to do live broadcast but because I am far from the console and I do not have such a big cable I can get the audio wirelessly for example with rode microphone question mark

[@shanecombs1993]

My audio is going into the iPad in mono. Even though I’m using RCA (L R) to TRRS from my tape machine into the iPad. When I use my laptop I can send audio into adobe audition in stereo using the same cable. I’ve tried multiple different apps, what’s the issue

[@Syshiyi]

Same issue , is your problem solved."?

[@shanecombs1993]

@@Syshiyi yea apparently you cant record stereo diect using TRRS into apple devices because the phone/ ipad thinks it’s a headset mic so it only records mono. To get around this what you need instead is a USB adapter, if the phone or ipad detects USB instead of AUX you can do stereo. Search the video “how to do stereo recording on iPhone” by “ToolsElectroDIY”

[@shanecombs1993]

@@Syshiyi yea apparently you cant record stereo diect using TRRS into apple devices because the phone/ ipad thinks it's a headset mic so it only records mono. To get around this what you need instead is a USB adapter, if the phone or ipad detects USB instead of AUX you can do stereo. Search the video "how to do stereo recording on iPhone" by "ToolsElectroDIY"

[@Redding9463]

There look to be multiple level adjustments on the mixer. It looks like you only used a couple. What are your go to adjustments, especially if you're starting to use mixers for the first time?

[@musicjazzvez]

Thank you for sharing!

[@nero-one]

don't have one of the mentioned alternatives... but I got another TRRS 6 foot cable, but only get ambient audio to iphone11 and a MacBook Pro... what do you think could be wrong??

[@anthonyalcober2874]

What application on phone did you use?

[@djjamel-er3ri]

Are you able to bypass the sound board and plug the mic straight to the iphone

[@trinelisevaering]

Thank you super helpful: But the audio meter app you mention "bus jog"? can you write the name here?

[@guerorioss]

bossjock jr

[@stanleyrimpson5756]

Anyway to do this wirelessly? Maybe a transmitter?

[@WorshiptheKingMusic]

sure, I bet you could do that.

[@bikersoncall]

How much better is using an audio interface from mixer to android, than just running direct from mixer straight into an android phone? I'm running direct into phone now with 1/8'' trs jack, the recording is not great, but not horrid like when I record 'open air' with no connections. Would it be much better to go; Mixer TO audio interface (UCA 202 BERHINGER OR brands),TO phone via USB C adapter?

[@hendrikviljoen3279]

Hi I have a iPhone 8 and some se 7 and 8 mics with a Mackie Profx12 v3 mixer. Could I use your method here for sound baths with gongs and tebetan bowls or will I lose a lot of the sound quality. I don't want to lose quality after spending out on decent mics and mixer to be let down with phone

[@alexisnihon1]

CAN I USE ANY MIXING BOARD?

[@jsellers7795]

Looks super easy. However, I already have my main outs going to my speakers. Tried using Aux outs, headphone out, and RCA record out. My iPad Pro with USB-C is not picking up any signal from the mixer. Cannot figure out how to get it to not use the on-board mic.

[@JaycebelGanda]

Hi is this setup it will work for mackie pro fx 10v3? Thank you

[@supermaestro67]

Hello. question: I have behringer line 2 usb cable + otg cable for android phone live facebook transmissions. where do I insert the two behringer line2 usb jacks into the soundcraft efx 8 mixer? thank.

[@JaycebelGanda]

I tried your set up to my mackie pro fx 10 v3 it works but the problem is the effects of my mic is not working. Can you help me what is the best thing to do. Thankyou

[@benardlorrabellanosa]

May i know if have you use any app for video on iphone or just direct from the camera itself???

[@WorshiptheKingMusic]

im not sure

[@PaulTupou1301]

I seem to have a problems with the boss jock Jr app. I’ve hooked up everything as you said to my iPhone and installed the app. When you push the lock symbol it works but it always seems to pick up from the iPhone speaker not from the mixer. It also says how are you listening when I’ve connect to the iPhone. It say’s headphone or speaker. I’ve tried connecting just with the cables and with an audio video interface adapter. It still picks up sound through the iPhone speaker. The audio interface is a small device I use for my canon camera and it works perfectly fine. I also install another audio metering app called Pro Movie and even that doesn’t seem to show or pick up the sound from the mixer using the cables or from my interface device. Not sure why it doesn’t work for my iPhone solution. Any suggestions. Thanks

[@ronrocker]

Where did you get that little white connector that plugs into the lightning receptacle?? I need one for my church setup. Norm Todd

[@jeffsellers3497]

Used my Aux Out thru headset buddy and into iPad Pro. Tried live streaming thru KZbin and the iPad still used the on board mic instead of the mix. How do I switch this?