Audio-Technica LP60X: What to know before you buy

[@JayTeaLive]

This is my first turntable and I love it! I am going to upgrade in a few years but this is a great starting point and the sound is fantastic. I know there will be people who complain but as a starting point to an ever expanding catalog of record players this is a good start while you learn and research the next steps.

[@jc-xl4uy]

Did u get powered speakers or did u just stick with the pre amp

[@RikardJohansson]

For someone who is new to turntables, what does it mean to upgrade?

[@iggykad]

@@RikardJohansson it's not a word specific to turntables it just means to get the better quality version of a product

[@NibsVA]

can't believe people on reddit say this thing "destroys" your records lmao

[@EightSixMatt]

The analog audio community (specifically the vinyl portion) can be very polarized. The concern for this that I have seen is really a non-issue (in my opinion). The factory setting applies a higher gram force, and that older models of the tonearm could push down more inwards over time. It's the difference in a goose down feather to the face, or a stiff eagle feather to the face. Some act as if it's comparing a goose down feather to the face, or a brick to the face, this is a fine easy-to-use turn table.

[@NicholasTobolski]

@@EightSixMattthey’ve ruined the reputation of the Crosley Cruiser. This is their next target.

[@EightSixMatt]

@@NicholasTobolski I’ve gathered (based on recent comments)

[@prodaquatic]

exactly why i hate this fanbase, people push their beliefs onto others way too much.

[@NibsVA]

@@prodaquatic i got like -30 downvotes on the turntables subreddit just for saying i own an lp60x lmao

[@mgofficial5470]

It’s a great record player I’ve been owning it for a few years now it’s amazing and great price

[@niklas-yf1de]

hey man can i connect the analog out to audio in?

[@mgofficial5470]

@@niklas-yf1de theirs a switch on the back like what are you trying to connect a speaker

[@mikecheck7940]

Good day. The stylus can't be replaced?

[@mgofficial5470]

@@mikecheck7940 yeah it can the needle can

[@obin8910]

​@@mgofficial5470hey brotherman. Can you recommend a good stylus for this?

[@fredspekvet5875]

some older record players from the 60's , 70's and 80's used tracking force anywhere from 2 to 6 *!* grams, so please, don't let them get to you. this will not damage your records, what so ever. This is a fine entry record player that sounds fantastic for it's price, nobody should be scared to buy it.

[@if6was929]

You told me what I needed to know without any b.s. Thank you!

[@EightSixMatt]

Glad it was helpful to you!

[@tbrown6559]

I’ve. Seen some comments elsewhere complaining about this not being upgradable, or not “ audiophile” worthy- of course not. It’s

[@EightSixMatt]

I'm sure she'll love it and appreciate the ease of use. Audiophile is simply defined as a hi-fi enthusiast - and there is no rule to define an enthusiast has to be an elitist. If one is enthusiastic about something like audio - they are an enthusiast audiophile. :)

[@vrassidas_pols]

During pandemic period I bought At lp60xbt for two reasons: a. for to replace Nad 5125 that stop to work after many years in use and b. all stores was closed and was difficult to find something else . I bought in offer for 170 euros from a big greek chain of stores . It was not my first choice. But when I listen in my system for first time was very happy because the sound of this turntable was a very pleasant surprise! Detailed quite without distortion and very pleasant! I think very lucky a really love this turntable! ❤😊

[@fremmenista]

Cheers for the to-the-point info, the lengthy preview with good equipment, and the actual "is this worth it" at the end! When researching new things to invest my money into, it's nice having an actual opinion that doesn't leave me with more analysis paralysis.

[@EightSixMatt]

Hah! Glad it was helpful!!

[@mhagain]

I bought one of these recently as a second turntable for first plays and testing of second-hand records from junk shops, record fairs and Discogs. My main turntable is a Rega Planar 8 with Apheta 3 going into the MC input of a Rega Aria phono stage, so the Audio Technica plugged nicely into the MM input and I can flip between the two using the front switch on the Aria. I wanted something that was cheap but not nasty, and that had a removable/replacable stylus so it could sustain the kind of abuse I was planning to give it without going beyond beer money in expense, and the AT met my requirements perfectly. I don't suppose many people run one of these through a Rega Aria, but it's surprisingly good; the Aria cleans and tightens the output and lets the intrinsic quality of the AT come through fully; it's obviously not going to compete with the Planar 8, but it's not too shabby at all and can certainly give a good account of itself. I fully agree with one of the attractions of a deck like this being that there's no setup or faffing about involved (the same is true of the Planar 8). 20 years ago I might have had to be held back from going down that rabbit hole, but these days I just want something I can take out of the box, plonk down on a level surface, plug in and start playing music on.

[@EightSixMatt]

Not that you are not now content with your LP60X :) but that LP3 has a few offerings too in that cheap "abuse-worthy" - more feature rich similarly priced range. I gave away my LP60X and plopped the LP3 in its place so i could play with headshells and carts a little more easily so I would not have to mess with my Fluance one so much.

[@PeeOrbital]

Had one of these for a few months. It's pretty good value.

[@היילייטיםבעמ]

3:15 Thank you for saying this! i had the lp60x for 2 years and now started to see people saying it "destroys your records" on reddit💀 a lot of them said it also had skipping issues which at least to me was non existent. only thing i'm questioning right now is if it's bad it doesn't have a counterweight because i heard it's very important for record players.

[@EightSixMatt]

Counterweights are important in my opinion - this one doesn't have a "counterweight" because it is set by AT in factory (it offers a static gram force intended for the stylus included) recently the community has decided to make largely unfounded remarks about it for what I assume was just boredom picking on suitcase turntables. Do what makes you comfortable but this TT is perfectly fine, and has been perfectly fine. Sorry for my delay :)

[@tomnilla9092]

I've had mine for 3 years now no issues it sounds great haven't hooked up to my Sony receiver with Polk Audio speakers and subwoofer did you clean your records properly and your stylist I can promise you you're going to have no problems with this turntable is turntable sounds better than some 500.00 turntables great value

[@EightSixMatt]

While I agree with your assessment I am partial to my Fluance over all of my other turntables ;) sorry for my delay!

[@Francis-xl2gu]

Just bought one of these the 60xbt, love it along with my edifier Bluetooth speakers, brilliant sound

[@brantlmao]

1:39 i came here to learn about my record player and i end up seeing johnny . definitely subbing.👏🏾👏🏾

[@danjohnson5952]

I'm getting it ship today to my house , I have a Marantz sr5200 and Paradigm studio speakers for it .... Can't wait to get into Vinyl 👍👍

[@EightSixMatt]

Heck yeah! What are you going to put on first?

[@danjohnson5952]

@@EightSixMatt I don't know yet do you have any suggestions ?

[@EightSixMatt]

@@danjohnson5952 the Nat King Cole Story Volume 1 is a good classic. I listen to all kinds of stuff but that was one of my first. Has a classy-classic feel. Hit up Discogs if you haven’t yet. It’s like an eBay for albums.

[@hyderzuern5664]

I have owned one of these for 3 years now and no problems

[@midnigvts]

Will I need to buy external speakers? Amazon says it comes with built in speakers but everything I have seen on reviews and stuff says I will need speakers

[@EightSixMatt]

I don't know what specific Amazon listing you are looking at. Some sell it with speakers, if it does not have speakers - yes you will need some. There is no built in audio in this model.

[@frenchperformer5401]

Passive sounds are a bit overpass and active sounds are more true (opinion and ears, My left ear is "quieter" than my right ear, and I'm using old headphones) Edit: That was a very fast Review, I'm glad I can listen fast.

[@EightSixMatt]

I'm glad you can too, I slow for one 😎

[@jacknjill3000]

Wow and sounds incredible and thanks for the video and review!

[@EightSixMatt]

Hope it was helpful!

[@chrisjamesr77]

I just ordered one of these, the "At-LP60XHP", which I guess is the same exact thing but with a headphone jack. Looking forward to getting my hands on it and listening to my soon-to-be-expanding record collection, lol

[@Cadpat07]

So it’s not an issue that this model doesn’t have an anti-skid? Also, what is your opinion on replacing the slip mat? What’s the thickness of the mat for such model?

[@b.j.thomas3264]

If it had mp3 capability (connect with computer to digitize records) I more than likely would have bought this instead of the Sony I bought. A number of things irritate me about the Sony. Not a bad turntable overall but I could have gotten much better for close to the same price or bought the AT for less money.

[@EightSixMatt]

Well, it might be too little too late, built in is a fun perk but there are audio capture card devices like this out there :) amzn.to/3XFSFIp (thats my short commission link the long ones irritate me sorry)

[@IfeelKindaSick]

There is a version with USB capabilities called LP60XUSB, it's only 130€ in EU.

[@b.j.thomas3264]

@@EightSixMatt thanks! looks good!

[@gamble777888]

So just sharing my experience: Bought this table two years ago but suddenly a day ago the audio just stopped working correctly. I assumed it was the needle needing a replacement but replaced it with two different needles and neither worked well. My feeling is that it's something else in the cartridge head that's broken but since this TT does not have a detachable cartridge I have no way of validating. The machine is out of warranty so I'm gonna go try to see if I can find someone to fix it here locally. If I could do over I would definitely buy a fully manual machine and with a detachable cartridge head. Looking for alternatives incase I can't repair (or repair is not worth the expense) and I'm leaning more towards something like the Lp120. In general I'm avoiding any machines that have key non-replaceable parts or cables in the future, and as a hunch I'd stay away from automatic stylus movements as I feel the odds of those malfunctioning at some point must be a lot higher than the manual ones.

[@EightSixMatt]

If you’re looking for recommendations I love Fluance. They make some awesome tables, can swap out headshells and carts easy-peasy, auto stop near the center. Great turn tables. Bummer about lp60!

[@gamble777888]

@@EightSixMatt It was great while it worked. In its defense I've scowered forums and it doesn't seem to be a common issue, so seems I was just unlucky. I've seen different Fluance tables readily available here in Mexico (Amazon) so I've had them in my radar. I think I'm still looking at the budget range, so it would be either the RT80 or 81, though the 85 is also available, and if you tell me it's a huge difference I might consider splurging on it.

[@EightSixMatt]

@@gamble777888 I got the 82, that’s the lower priced higher end variant. It lets you figure out preamps and how you want to run/color your sound via phono, it’s been a fun thing for me. The 82 has been my favorite to own, and I own a few 😅

[@gamble777888]

@@EightSixMatt Thanks for sharing that. I haven't seen the 82 available but I'll look for it. If I hook my table up to my home theater receiver do I still need a preamp? Searching on google it seems receivers wouldn't need one, but I wonder if it's still advisable.

[@juzziepope]

i have one of these , it now makes a "clicking" sound all the time, makes it even if you don't have a record on it, not sure how to stop the clicking

[@alejandrafonseca285]

what are the active/power speakers that you are using in this video? i bought the Audio Technica LP60X Turntable but i think i got the wrong speakers for it, and i don’t know which speakers are the right speakers to buy.

[@EightSixMatt]

My speakers in this video are Bestisan SR02 speakers.

[@christopherhachet5184]

Huge fan of Fluance. I run an Rt 82. Run it through a Darlington labs MM 6 B phono amp with a VM 95 Series At cart. Sounds fantastic. Though I could see buying something like this for one of my children.

[@Birdie_210]

How’s the needle? Will it scratch my records?

[@EightSixMatt]

No, based on other peoples more recent comments - it sounds like people in the community are just trolling. the LP60s are good entry level by a very professional long standing audio company. If you encounter issues AT has always been top game for problems.

[@Pedrox94]

If a plug this turntable with a Marshall stanmore II is gonna sound good? The one I own doesn’t, produce? The bass?

[@EightSixMatt]

Loaded question, we all hear differently and it really matters what you think. That being said I find noteworthy differences among needles and different levels of separation with different needles on my same setup. If you think you may want a different needle but like these features check out the LP3 by Audiotechnica - I would say decent preamp can go a long ways to cleaning up and modifying audio also!

[@ChelloBertora]

Hola, se puede poner una pua de mejor calidad? O solo se reemplaza por la misma aguja siempre?

[@EightSixMatt]

lo siento, mi español no es muy bueno. No, la aguja no se puede actualizar. Solo se puede reemplazar con otro ATN3600L. Audio-Technica tiene una opción más nueva que ofrece más personalización. El AT-LP3. Aquí está uno de mis enlaces a uno si eso ayuda. amzn.to/3JeKQUK

[@ChelloBertora]

@@EightSixMatt muchas gracias! te dejo un enlace de mi música por si te da curiosidad jeje 🤩kzbin.info/www/bejne/bGfZq4mEacuUra8

[@EightSixMatt]

@@ChelloBertora ¡Muy lindo! Música fácil de escuchar. ¿Algo acelerado en su menú?

[@derik8625]

If I buy this turntable and some speakers and only that, would that be ok? since the turn table has a built in pre amp.

[@EightSixMatt]

Yes but you’ll need active/powered speakers.

[@katyg28]

Thank you for this. Question. You showed the red and yellow stylus. Are those compatible upgrades? I love my turntable but I started doing lives on TT where I’m spinning about 40 hours a week. I’ve had no problems thus far but should/can I just change the cartridge or do you think it would be beneficial to upgrade to one of those other needles. Also any other accessory necessities would be appreciated as well. I’ve seen some spaces saying to get a ceramic top instead of the mat it comes with but seems divided whether it actually helps with static or just more asthetically pleasing. Any advice I woulf greatly appreciate

[@tango_gru]

hey man , thanks for exposing the nitty gritties of this one. Any suggestions for people who like to upgrade the shit out of a device ? something that is really good at stock and then with upgrades .... sky is the limit.

[@EightSixMatt]

Oh, Fluance for sure in my book hits that mark, detachable headshells, platter options, easy to use.

[@martinasaljanin2810]

Which speakers would you recommend with this turntable?

[@EightSixMatt]

I am a fan of the Bestisan SR02s for price and ease of use + good sound. There are a few options with a little more to offer also - Edifier has some good active speakers for a decent price also (was just talking to someone the other day about them)

[@ronthomas6122]

Great entry level turntable. I hooked it into my home system and it sounds great! BUT the records play in monaural not stereo!!! Any help?

[@EightSixMatt]

Do you mean you are only getting audio from the left or right channel as in one speaker - or that it's playback is mono with no L/R fade where you know L/R fade should exist? If it's the first, check the speaker connections first, if through a receiver check if you have an A/B or L/R setting and try those. And the obvious is the "is the vinyl you are playing stereo or mono?" question If Azimuth is off, with this turntable I would say start with trying a replacement stylus for the 3600l, if its still off, and its none of the above it may need service.

[@ronthomas6122]

@@EightSixMatt When I play a stereo record it plays through all speakers with no L/R fade. I will check out your other suggestions. Thanks for the help!

[@konstantinoskoroneos1189]

Thanks for the review! My audiobar supports AUX, will it work with the Analog output of the turntable?

[@EightSixMatt]

If you have a line level speaker you can use the 3.5mm out from the table to the line level input on the speaker. 😊

[@Nerdelkin]

Well, AT released 3600LE cartridge with elliptical stylus, so no need to tinker or DIY

[@Gryphondork.]

No shot you have a Johnny silver hand figure. I absolutely love that game and all the samurai songs.

[@EightSixMatt]

Im a fan choom!! 😂

[@Gryphondork.]

@@EightSixMatt preem😂

[@alb4047]

Would this be a good upgrade over the crossly, I just want something that can make my records sound the best they can be, I’m not an audiophile.

[@EightSixMatt]

I personally believe it to be a definite upgrade over most Victrola and Crosley players.

[@paraplegicspiderman0123]

Idk If it's just me but the active speakers sound clearer than the other speakers. Also what speakers do you use?

[@EightSixMatt]

My passives are starfavor, the actives are bestisan

[@coastercraziness]

What are some cheap speakers (with good sound) I can get to use this with?

[@EightSixMatt]

'good sound' is subjective. I like the Bestisan SR02s for low price active speakers - There are also some Singingwood speakers that are pretty nice. They are considerably affordable. Can I speak to if you will like them? No, but I like them for their price to performance.

[@stevenholt5484]

Take a look at the Kanto lineup. The YU4/6 would probably suit you well.

[@r.l1003]

Excuse me but i rally dont understad if the turntable can make sound or if it is required to have speakers ti listen to music

[@migslacson7501]

Do you know if this connects via bluetooth to my LG Soundbar? Thanks!

[@EightSixMatt]

The one in this video is the no Bluetooth one. There is a Bluetooth variant that should be able to pair to most BT speakers.

[@migslacson7501]

@@EightSixMatt Thanks! I appreciate the reply

[@Mailrobot]

Whats that rack where you have the turntable over the amplifier? Have a link? Thats exactly what I need.

[@EightSixMatt]

Ah, I did too, couldn't find anything that worked so I bought a 1x6 cut and stained it and affixed printer stand legs to it. Most printer stands didnt offer the surface area I needed - so it's a DIY stand affixed to printer stand legs :)

[@AlicjaHemperek]

i hope i wont sound stupid, but its my first experience with turnables- do i need speakers to play music? will i be able to do it without them?

[@EightSixMatt]

Sorry for my delay and I am sure you have figured it out by now - Yes you will need speakers. Easiest to pair with this one are some decent active speakers - Bestisan if they still make the SR02s are my favorite for the price.

[@isaaharel3395]

I went to my favourite record store I asked the guy about there turntables this was their beginner model so yeah not the best but probably better quality than my crospy

[@joeybailey9628]

Can the stylus be replaced ? I’ve had my player for 3 years now and starting to notice muffled feedback

[@EightSixMatt]

The stylus can yes, you can pop it off and replace it with another ATN3600L pretty easily

[@DavidRHelme]

I’m getting this record player but do you know any affordable speakers?

[@EightSixMatt]

I like Bestisan for lower priced good sounding ones. I think their prices have gone up a smidge since a few years ago.

[@nickfunkero8856]

Hey! Thanks for the video but I’m not sure about something, what else do I need to use it? Do I only need speakers or something else as well? I would really appreciate if someone can clarify this.

[@kinsmarts2217]

You need active speakers along with the turntable at least, If you want to upgrade later on, buy a preamp.

[@nickfunkero8856]

@@kinsmarts2217 Thank you so much man!

[@ITRNHWithoutThisGlazer]

@@nickfunkero8856good speakers are the r1280t

[@RICO-k8z]

does it need speakers to work?

[@driftwood-c4g]

What is the model number of the Fluance you showed at the end?

[@EightSixMatt]

Sorry for my delay :) that's the RT82

[@helmutweber1465]

Can you say something about whether the record player has strong vapors? In other words: Does it smell very chemical?

[@EightSixMatt]

Not that I had noticed, but I didn't go sniffing to be honest. =\ sorry!

[@shwetank474]

Hi, needed advice on whether I should get this or LP60XBT: I prefer to listen to records on my headphones (edifier stax spirit s3); is the sound quality better when listening on headphones with AUX than Bluetooth?

[@dylanfrank1141]

Hi! I hope you already found your answer but if not something important to note is that if listening through AUX you will need some kind of amplifier or headphone preamp to listen. If you get the wireless version you can listen with only the turntable and BT headphones. Hope this helps!

[@danpekarna19]

hi, could you send me a link for your speakers, i dont know which ones to buy :)

[@EightSixMatt]

Sorry for my delay! The active speakers I recommend are the Bestisan SR02s. Their popularity as it grows has brought the price up some but still within reason. Heres an affiliate link from me amzn.to/3TofaAF but if you don't like using those just search Bestisan SR02s and you should be able to find them.

[@danpekarna19]

@@EightSixMatt no worries, thank you 🫶🏻

[@ZJ-ne9kn]

I have had this player for over 3 years i wouldn't consider my self an audophile but i have had several turntables over last 15 years and well over 1000 lps. I think there's really not much to complain about simple and does way better almost feel like you're using a higher end set up. I havent messed with tracking force much how would you best do that?

[@EightSixMatt]

Tracking settings are set at the factory level with this one. the LP3 model is one that allows for adjustments (and is also automatic like this one).

[@waschkadse]

I don't understand the whole adjustment thing. Does a fully automatic turntable automatically do it as well or better? Or is it better to have a turntable where you can adjust the tonearm and needle manually? Can you compare it to driving automatic cars and shift cars?

[@EightSixMatt]

On an automatic you set the record on, press start and it does the rest - raises the tone arm, finds the edge, plays the side, returns the tone arm and waits for you to flip or hit start again. On a manual you lift the arm, find the edge you lower the arm, when it plays to the center (depending on your tt) it keeps spinning waiting for you - or shuts off waiting for you to come retrieve the tone arm and return it to its cradle. Is that what you’re asking? You can also lift the arm and pick a song, anti skating can be set, but changing the cart on this turntable is not possible. Sorry if I’m not following what you’re asking.

[@waschkadse]

@@EightSixMatt I am new to the whole topic and kind of overwhelmed sorry - So I saw a lot of players that had the two little screws on top of the cartridge with which you adjust the needle. Now I am wondering if it just isn't necessary with this specific player because it is automatic or if it is something that only "good players" have.

[@EightSixMatt]

@@waschkadse ahh that type of adjustment is fine tuning-esque. On this one it’s a non option. If you install a new cartridge on a turntable accounting for azimuth is what you may need to do. When the needle sits in the groove, if it’s off, one of your channels may have distortion/poor sound/terrible sound. You can adjust the cartridge and use a mirror or special protector to ensure the stylus is sitting straight/correctly so that it rides the grooves well as the vinyl spins. Unless you plan on buying a tt with the abilities to swap a cart, and you spend the money on a new cart to swap, this will be a non issue for you most likely. Even if you do, it’s not a difficult task and most headshells are easy enough to setup (with mild patience)

[@waschkadse]

@@EightSixMatt Thank you very much for your explanation!

[@EightSixMatt]

@@waschkadse For sure, my only advice is watch out for toxic folk in the vinyl community. There is no shortage of them! Whatever makes you happy is all that matters :)

[@hedisappeared_]

Does it have a headphone jack?!

[@dirtboy1640]

Reccomendations for a reciever to pair with lp60x???

[@31cify]

LP60X or LP60XBT?

[@bpalpha]

Any. But entry level I'd say Yamaha R-S202, and Sony STR-DH190. I owned this table and it's ok. I gotta say a Fluance RT-81 makes a lot more sense.

[@babyboy1971]

Weird question, I just bought the bluetooth version of this and it's great, but I can't find a power button! I'm just unplugging and replugging. Does it have a power button?

[@llGhettoxJennyll]

it doesnt have a power button, put a record on and press start! 🫶🏻

[@llGhettoxJennyll]

it’s in always on mode, if you wanna power it off, you’ll have to unplug it

[@EightSixMatt]

@badboy1971 Just as the other person said, it's always on with a standby mode. Unplugging is the way. There are things like this that may help (affiliate link because its shorter mainly :D) amzn.to/4a7ngmQ

[@notmanatee2445]

If you have bass heavy techno albums they can skip. My dp homework lp skips on this turntable,you can upgrade the cartridge to an LP Gear cartridge and will sound better,followed by acrylic platter mat

[@leonardopapantoniou4227]

Is it better with external phono?

[@EightSixMatt]

That's a good question and a bit subjective. the STRDH190 processes phono, and does 'well enough,' but I ran it to my Fosi which I liked better (and while not an actual tube amp, the tubes add a different color to the sound) - ultimately I would say it really depends (but is largely negligible differences that will be based off your phono preamp device). For a TT like this one - active line level stuff is more the target, with my Fluance or UTurn I run them through different Preamps that (to me) have a different 'feel.' Long story longer: if you ask me, for a 3600l cart on a largely entry level tt, some active line level speakers are where its at. Sound can be so subjective though and its hard to answer with definitive opinions. Sorry if that doesn't help much.

[@MartinWeinecke]

A very helpfull video! Many thanks!!!

[@zippydoodoo3897]

On the Bluetooth version will it work with an Amazon Alexa echo dot as a Bluetooth speaker (will be using temporarily before I get some better Bluetooth speakers)

[@EightSixMatt]

According to a quick search for people trying that it seems it can.

[@hectorfraire3355]

Hello Do you have the exact size of the turntable? I want to know if it fits on a table I just bought.

[@EightSixMatt]

Here are the product specifications: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D

[@hectorfraire3355]

@@EightSixMatt thks!!!!

[@GobbyD]

I plugged in the turntable to v aux on my receiver, it plays a little quieter than usual and my subwoofer barely works. Could someone help me out?

[@EightSixMatt]

Whats the receiver model? I assume youve assured its pushed in all the way

[@EightSixMatt]

3.5 to l/r on the receiver and set to line toggle on the TT unless your bypassing line to a preamp or internal preamp on the receiver.

[@WMalven]

LOL!!! I love fully automatic turntables. Playing music should be FUN, not hard work.

[@ari-nw9tu]

Hi, I have the same turn table and for the receiver I purchased the Sony STR-DH190 and I have passive sony speakers. Now when I play the turntable it sounds really bad, it sounds low and just not good I was wondering why that is?

[@EightSixMatt]

Are you using the phono input with phono toggled or are you using the built in preamp on the TT?

[@LumesideLside]

Ok do you need speakers for it ? I'm confused

[@EightSixMatt]

Yes it does not have built in speakers

[@BboyTechie]

Hey I know you personally recommend the Bestisan SR02 as active speaker to go with this record player, but they don't sell them in my country and I would need to get them imported. What would be your second recommendation for active speakers?

[@EightSixMatt]

Check and see if you can get Edifier R1280T bookshelf speakers. Those are pretty enjoyable active shelf speakers also.

[@EightSixMatt]

Second note if you don’t want monitors with a more neutral flat the 1700bt or 1280db

[@BboyTechie]

Thanks for the recommendation, been using the edifers with the lp60x. It's as beautiful combination

[@bromptinowner763]

​@BboyTechie I also bought edifier o

[@JackTheMusicGuy]

What speakers are good for this turntable that use the built in pre amp and are 40-50 or cheaper?

[@EightSixMatt]

If Bestisan still has some for a good price those are what i would recommend. The SR02s are pretty decent and often affordable but their popularity may have driven the price up.

[@JackTheMusicGuy]

@@EightSixMatt the only thing im confused with is finding speakers that work with the LP60X.

[@GrowingTreesEasy]

Myman is it possible to mix some house music on it?

[@EightSixMatt]

It's a pretty basic consumer turntable - hopefully someone else can offer you better input, but wouldn't the preference be a table with direct drive and something like a concorde be the preference for using it to do that? Unless I am not understanding your question. Sorry for my delay :).

[@isaacbrand4150]

Do u need speakers?

[@EightSixMatt]

This TT does not have built in speakers - so yes you'll need something.

[@svenvdv2880]

@@EightSixMattany budget option speakers you recommend? Just something small that I can put next to the record player or something

[@frenchperformer5401]

The best option is always trial and error, find what you like and don't like, and maybe ask the store if you can rent some speakers to test out.@@svenvdv2880

[@yeremiahangeles7252]

But it doesn't have a counter weight on the arm, won't it scratch your vinyl?

[@yeremiahangeles7252]

If its automatic does it need one?

[@EightSixMatt]

@@yeremiahangeles7252 it’s set at factory

[@bread5358]

Would this turntable paired with the Edifier R1280T speakers be good? Im just starting out and i don't know anything about anything to do with turntables. I'm going to be using it for mostly hip-hop albums though.

[@ITRNHWithoutThisGlazer]

yes. yes yes yes yes yes yes yes yes they sound amazing for $100 from what I have heard.

[@bread5358]

@@ITRNHWithoutThisGlazer Thanks for the reply. I really appreciate it. Sooo yup i think thats what im gonna do then :)

[@husky0877]

Has anyone tried the AT91/AT91R stylus? Is it worth the upgrade?

[@_f0lkl0re]

this is really late to comment, but could you please tell me what you need to buy besides the record player?

[@_f0lkl0re]

also, did you get the Bluetooth one?

[@EightSixMatt]

@@_f0lkl0re I did not, the one in this video is not BT - Bestisan SR02 speakers are (in my opinion) good for the low price active speakers to pair with it.

[@stevenholt5484]

Well, some records would certainly be helpful!

[@frenchperformer5401]

Speakers, or 3.5 plug adapter. If using loudspeakers, use a separate platform, or 1 shelf desk layer apart. Stickers!!! because they look silly :3 Record cleaning set, because of dust and all that. and tiny flathead screw driver (if you are a perfectionist)

[@_f0lkl0re]

@@frenchperformer5401 thanks!!!

[@vinyl.croatia]

1:22 Those styli need different weights so they won't work 100% and they could damage your vinyl!! For example, AT91 (the yellow one) needs about 2.5 grams but AT3600L needs 3.5 grams. That's quite a difference.

[@EightSixMatt]

It does not need 3.5 grams nor is it weighted at 3.5 grams on the lp60x in this video. Gf scale measures it at 2.5 which is in the recommended range of the 91, as well as the 3600, it’s doable and fine. (There was an issue with the spring - as well as different mats increasing measurements by adding lift resistance)

[@vinyl.croatia]

@@EightSixMatt Oh, then it's all good!

[@fenaavila4608]

can you play 10 and 7 inch vinyl with this one?

[@EightSixMatt]

You can not use the auto feature for 10", you can manual it. It does have a toggle for EP and LP though.

[@reemaabdulaziz9225]

Do i need speakers for it to work?

[@EightSixMatt]

Yes it does not have built in speakers.

[@ElJuanPeterPan]

Hello. What speakers would you recommend? Choices that don’t break the bank would be greatly appreciated due to the fact that I’m on a budget and I’m new to turntables and record players. Thank you in advance for your time and help.

[@EightSixMatt]

@@ElJuanPeterPan I like Bestisans stuff for not breaking the bank. The SR02s are solid to me.

[@taycroker]

Just moved and found that the movers didn't pack the turn table in its original box. Now the arm doesn't stay down it bounces and sways hen you go to play a record. Anyone have any ideas what to do.

[@EightSixMatt]

It may be worth a shot to reach out to AT, if it’s still in warranty period they are pretty quick with repair turn around, if not it couldn’t hurt to see they still would any way right?

[@k21sm24]

hi ! i’m new with record players and i wanted to know the different between the at-lpgo-bt and at-lp60xbt-bk (this one) because i can’t find comparisons with the lpgo

[@EightSixMatt]

It’s the Walmart ‘exclusive’ variant of the LP60XBT

[@MegaP0ssum]

Thank you

[@quentinharoche9564]

I must be cursed but I buy this turntable twice and it never work. First of all, the diamond slipped on the record (so I have to buy another needle). And then, the sound was horrible with a lot of sizzling. I don’t know what went wrong, everybody says it’s a great turntable but for me it was a nightmare

[@EightSixMatt]

Sorry to hear! Hope you can find something that meets your expectations out there and doesn’t give you grief!

[@itsrouryyy]

so if i don’t have external speakers i can’t play it?

[@EightSixMatt]

Right, it needs speakers to be heard (or headphones if thats your cup of tea)

[@GavinLeBlonsky]

Just got the turntable! Is there a way that I can get it to play without speakers and a preamp or is that necessary? If they are what do you recommend?

[@VynilCat]

Do you guys know what the tracking force for this turntable

[@EightSixMatt]

3 to 3.5 is the default range.

[@Mijarry]

What if i dont have speakers or a phono?

[@EightSixMatt]

I don't know how to answer this well without sounding like a smart ass. Without speakers - you won't hear anything.

[@jtree250]

Is the cartridge pre-aligned?

[@EightSixMatt]

Yes

[@jtree250]

@@EightSixMatt thanks

[@Racso_]

Hi. Quick question: if you play it with the lid closed, does the arm work correctly when going back to its base position after the record has ended? In mine, when the record finishes and the arm gets raise, the cartridge makes contact with the lid (as if it was raised too much), and it can't move at all (probably because its making friction against the lid).

[@EightSixMatt]

The lid should not obstruct any function.

[@maxbg]

Value for you money.

[@alejandrovazquez7352]

Does the needle hurt the vinyl?

[@michaelmaguire2078]

Does it come with a preamp

[@EightSixMatt]

There is a built in line level preamp, leave it set to that for active speakers - flip the bypass to phono on the back if you're running to a phono source.

[@germanmedicis625]

Very basic turntable and I don't like that straight arm at all. Seeing it doesn't motivate me to put on vinyl and listen.

[@stevenholt5484]

Well, I beiieve the reviewer did mention the Fluance at the end, that one is a definite step up. But you have to be careful : some of the best turntables that I ever heard -- and I've heard plenty -- are 'very basic turntables'.

[@frenchperformer5401]

well you do you, if u dont like it dont get it or somethin just get something that makes u happy

[@Francis-xl2gu]

Well I've just bought this the Bluetooth version, first turntable for about 30 years, the Bluetooth feature ie no wires everywhere is brilliant, love it

[@guayaboxuruguay3287]

The tonearm Is too short, jump maybe in dificult grooves.

[@JenniferSmith-sk6yl]

My needle is not dropping

[@EightSixMatt]

Make sure the lever is lowered next to the tone arm. If you hit start and it has the tonearm lifted, the needle will not drop down.

[@JenniferSmith-sk6yl]

@@EightSixMatt I figured it out. Just can’t get it to play through the receiver.

[@agegroot5666]

Buy an old turntable.

[@Paul47Tat]

Jesus! Do you have to catch a bus or something?! Slow down when you're talking!

[@EightSixMatt]

@@Paul47Tat If videos like that are too fast for you, you can actually very easily slow them down on a case by case basis on KZbin using the gear icon. Hope that helps - have to catch my bus.

[@SnoopysVet]

Do not buy

[@crispygravy8358]

Thankyou so much for this video, I’m wanting to get into turntables and record playing for a while now but I was scared because I know nothing at all! After watching hundreds of videos and getting very confused and almost giving up I found your video and it helped reassure me and explain things to me straight forward and more simple. Thanks so much dude! 🩷

[@EightSixMatt]

Glad you found it helpful :)

[@przemyslawgolda767]

can I use it withough additional loudspeakers ?

[@nataliejustice5639]

Is a preamp necessary for these turntables?

[@EightSixMatt]

No this one has a built in pretty standard line level preamp.

[@nataliejustice5639]

@@EightSixMatt Perfect! Thank you for your help!

[@EightSixMatt]

@@nataliejustice5639 np!