Autoart vs Maisto Detail. Cobra vs Mach 1 Which brand is more detailed. Cost difference

[@PASquared]

I hope someone will do a better Terminator model sometime. It really deserves the level of that Autoart Mach 1.

[@ultimatewarrior3310]

Maisto has improved lately. Some cars don't have detailed rims. Charger, and nova, but improved the mustangs, and rims acuratly

[@rodneylove8027]

Great comparison. Autoart costs more but you get what you pay for. Their quality is in the name. I have both in those same colors.

[@scottworsley3218]

That yellow SVT is hard to find.

[@EnthusiastsGarage]

Maisto is pretty good for the price but autoart is next level. I wish autoart had more variety.

[@musek5048]

IMO autoart does have a decent variety with the exception of Ferrari where maisto has that advantage. My gripe with autoart is their lack of detail on their newer models compared to what they used to put out while charging the same or more for certain cars in their lineup. Their sig series line up still has some very nice models but they do cost upwards of over 200 usually so you gotta be a huge fan to consider it worth the price.

[@boudewynwagener7653]

Thank you for the review. Love it. I have both of them. Love AA more

[@MrJune4]

I recently got real lucky, I bought a Autoart Bullitt GT for sub $70, and a Mach 1 brand new in box for $150 shipped!

[@jaimeromero7291]

Sheeesh! Congrats cause those two are pushing 300+

[@scottworsley3218]

The Maisto Mustangs are very nice for the price.(about 25-30 bucks when new) The Autoart mustang was around 100 bucks when first released.

[@1siksn95]

Love your collection!

[@Hopinmypony]

Autoart went all out 😲🔥

[@ryanlegois9075]

Did you notice the Mach 1 model had two oil caps on it look at back of valve cover on the auto art one

[@dannyjohnsonsgarage]

Yes, a long time ago I did see that. Also the Bullitt fuel door on 2003 models, the regular door on 2004 models, but on backwards. There are some interesting differences

[@justin.c_svt]

looks good. excellent collection.

[@musek5048]

maisto is straight up great value. sure, it's nowhere near as detailed as an autoart but for less than $30 on average (even less at costco/sam's club) they look great on display and you wont feel terrible if something breaks on them. autoart, while nice (i have several models) has a price problem because you have to consider what else is available around the same range usually. what they always get right is the overall appearance to the 1:1 version, regardless if its a sealed or fully opening model. my gripe with them lately is their attempt at trying to charge $150 or more for models that just dont have the same level of detail that their previous versions did. their move to composite wouldn't have been that terrible if they would have doubled down on making them as highly detailed as they could to compensate. i have a composite lambo and while its not as heavy as my diecast ones its not all that bad overall even if only the doors open. it still looks way better than a maisto version would probably look but for paying over $100 for any single model it gets harder and harder to justify if autoart keeps cutting corners.

[@shadowsfad3d]

Do u think a 03 Mach1 with 87k miles for $9,000 is worth looking at? Engine bay looks really clean, interior the same. Paint looks OK except for clear coat peeling on the hood and other spots, few rock chips etc. Thoughts?

[@dannyjohnsonsgarage]

Yeah, if it checks out that’s a good deal

[@tomkjr1]

I really wish that autoart had made the cobras too. Autoart pays more attention to detail than maisto. BTW...did you notice on the autoart mach 1's that there are 03's and some are 04? The 04's have the 40th anniversary badges on the fenders.

[@dannyjohnsonsgarage]

They have a cobra r that’s pretty good (has the manifold without the r I believe

[@tomkjr1]

@@dannyjohnsonsgarage Yes, a red version and a yellow too. They used to be like $25-$30 on ebay but just like the terminators, their prices are going up.

[@tomkjr1]

@@dannyjohnsonsgarage BTW Danny, have you seen this Bullitt? Or is it a GT?? www.ebay.com/itm/124744133956?hash=item1d0b546d44:g:AywAAOSwwotgr1~2

[@doobyboy21]

I know this is an old video but can you change the wheels on these models? Thankx !

[@dannyjohnsonsgarage]

I’ve seen people switch them out, and one of my models came with the wheel off and I popped it back on, so I imagine so

[@Lethal_Venom]

Id prefer the autoart, much more detail

[@mylesminor6936]

where can i get the autoart mach 1 mustangs?

[@tomkjr1]

ebay.

[@mylesminor6936]

@@tomkjr1 somewhere they arent so highly priced. seen them there they are like 280-480 from what ive seen..

[@tomkjr1]

@@mylesminor6936 Unless you are lucky enough to find a private owner with cars to trade or sell, I don't know of any other places that sell them. I have them all but only one of each. I bought mine years ago when the prices were much more reasonable.

[@mylesminor6936]

@@tomkjr1 ah i see, well trhanks. guess il just spend the 480 cause i really want them.

[@tomkjr1]

@@mylesminor6936 Yeah, cheapest one on ebay now is like $300.

[@robertocampo8107]

One is $100 plus and the other is $15............!

[@dannyjohnsonsgarage]

Yes, as I said- but both of these actually sell for $300 now.