Thank you soo much!! Not being able to solve all these problems with scales etc, almost caused that I would start hating autocad for ever. One of the best explanation about autocad on the internet. Keep doing such useful videos.
@1miguel688011 жыл бұрын
What if a consultant has his Ltscale set up to the traditional setting (option 1), and you use his linework as the background (xref), can you revise the consultants Ltscale setting afterwards to the 'New Settings" style?
@jeremytf7711 жыл бұрын
If the consultant has the LTSCALE at 1, you wouldn't need to change anything... just set the MSLTSCALE to 1 in your host file and you're good to go. Give it a try.
@TANGO999 жыл бұрын
Thanks for responding.My question is in regards to operating procedures for making line types, text, dimensions, Mleaders annotative in AutoCAD 2015.Is there a procedure? Must the annotative options be selected prior to beginning the dwg or may they be selected in the middle of a project. Is there a best order for selection.Thanks for your good work.
@jeremytf779 жыл бұрын
+tommy morphis Sorry - for some reason your comments were waiting for approval, which is unusual. Setting annotative settings is much quicker ahead of time. Which is why a good template file goes a LONG ways to making drawings easier. You can always fix later but it will be more painful.
@TANGO999 жыл бұрын
A great, and benifical, tutorial, thanks a load. is there an order of operation for setting lines, text, dimensions and Mleader to annotative? Only when beginning a project? At any time during a project?
@jeremytf779 жыл бұрын
+tommy morphis It is certainly easiest at the beginning, although possible to fix later. It will just be more difficult then. I would always set the text style first because it is used in the other styles (mleaders and dims).
@jeremytf779 жыл бұрын
+tommy morphis Lines are a different animal so set any time, they have no connection to the annotative objects which are text based.
@giovannifiorentino89477 жыл бұрын
Great job! Really apreciate it.
@TANGO999 жыл бұрын
Jeremy,Thanks again. Would it be too much for me to ask about fixing during a project as opposed to setting at the beginning? I have just been changing annotation and styles for text, dimensions and Mleaders at the request of a client. This resulted in a crash. I lost some work. Best,Tommy
@jeremytf779 жыл бұрын
+tommy morphis It is not something that is easy to explain in a short youtube comment. Set up the styles and move the entities over to the styles using the properties palette. Attach the required annotation scales. But there are a lot of quirks about the process. If crashing is an on-going issue, make sure you purge, audit, and don't attach any unnecessary scales to any annotative objects. If still crashing, start with a fresh file.
@alaahimada85629 жыл бұрын
YOU helped me solve a great problem i was having..thank you
@FlaviusAnghel12 жыл бұрын
Multumesc! Mi-a fost foarte util! Thank you! ;)
@adityabvsr5 жыл бұрын
You saved me!, thanks
@ALFURQONTAWABI3 жыл бұрын
thanks you sir very helpful
@stayconnect99133 жыл бұрын
thank u so much! sir u made my day
@ecfraser3 жыл бұрын
great video
@gagy310 жыл бұрын
thank's for this great tutorial.
@qzorn44408 жыл бұрын
i'm finally getting a line on this stuff. thanks. 8>\ .
@robertorecoaro84236 жыл бұрын
GRACIAS!
@TANGO999 жыл бұрын
My question, below, is in regard to AutoCAD 2015.
@jeremyfranklin26319 жыл бұрын
+tommy morphis I assume you may have deleted your question? Since I don't see it...