How to change front springs on VW TOURAN 1t3 [TUTORIAL AUTODOC]

[@autodocuk]

⚠ Attention! This video contains a mistake: 6:28 - the tightening torque is 60 Nm, not 40 Nm. We're sorry for the inconvenience 🙇‍♂

[@autodocuk]

🛠️ The tools you need to replace front springs: - wire brush - WD-40 spray - 12-point spark plug socket No.15/16” - combination spanner No. 18 - XZN Bit No. 6 - XZN Bit No. 14 - drive socket No. 16 - combination spanner No. 21 - HEX bit No.H6 - torque wrench - copper grease - drive socket No. 13 - hydraulic strut spring compressor - drive socket No. 18 - wheel impact socket No.

[@poderosojhon1]

Ciao auto sono un vostro cliente me potresti aiutarmi a cambia il clacson (trombetta )dalla mia macchina Touran ai fatto tutti video pastiglie freno anteriori posteriori ammortizzatori etc però ma nn quello del classon per favore aiutami ho dimi qualcosa dove si trova ? Grazie

[@PedenProductions]

Hello, great video, quick question, i have a touran 1 from 2006 (t1,t2) is this the same procedure?

[@autodocuk]

Thank you for your feedback. In general, the replacement will be the same, the only thing may differ slightly in the design features of your car.

[@user-oy8bv5qo7l]

Always with these videos, miss a lot of steps! Where has the driver side wiper motor gone?! Can't get to the top mount screws with it in the way. Also wiper arms don't come off that easy

[@autodocuk]

We cannot show all the nuances and problems during replacement; this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be carried out by specialized car services.

[@patrikhrabovcak1908]

If you spraying the copper grease be careful don't spraying on the disc. If you do cleane any dirt from your disc with break and clutch cleaner 🤝

[@autodocuk]

Yes, we used a brake and clutch cleaner for cleaning, this moment was not caught on video.

[@allenespiritusanto176]

Can you demonstrate changing control arm bushing, ball joint on Tiguan at what is common problems in tiguan particular in bushings because I can hear clamping under my steering wheel I made a car inspection from the Tire Craft Shop but they can't find which bushing is worn-out.

[@autodocuk]

Dear Customer! Thank you for the feedback! Unfortunately, we don't have any videos on how to replace the control arm bushing and ball joint in VW Tiguan. We are currently working on creating a wider range of tutorials including the car you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@ondabmw3934]

What do you do when the top mount 13mm captive nuts break and cannot be loosened?

[@tommyhelgevold7718]

Hi, how is it done on left side? Due to wiper mechanism there is almost no space

[@autodocuk]

Thank you for your feedback! In this case, before replacing it, you should dismantle wipers mechanism. Best regards, Autodoc.

[@thevictor3297]

good job

[@autodocuk]

Thank you for the feedback! Thank you for the interest in our channel. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@thevictor3297]

@@autodocuk Can I communicate with you

[@sasaokic7058]

Врхунски видео ! ☺☺☺☺☺☺☺☺☺😁😁😁😁😂😂😂😂😂😂😀😀😀😀😉😉😉😊😊😊😋😋😋😎😎😎😎😎😎😎😶😍

[@pekopjesivac1790]

Dw

[@virgitaburneikaite6904]

👌😊