It's an older video, but still helped me and my son replace a window in a 1989 Toyota pickup. Actual video of the cord trick is so much easier to understand than trying to figure out what a written description is describing. Thanks and well done!
@iknowlaa2 ай бұрын
I agree.. but this helped me alot to replace our broken rear window mazda BT50 2007. Best wishes from Brunei.
@PaulMaysHymns5 жыл бұрын
No nonsense clear instructions. Very helpful. Well done and much appreciated.
@robshaman29272 жыл бұрын
So many channels now a days are full of bs this video rocked
@SRT480HP5 жыл бұрын
I can’t imagine how much money you’ve saved people with your videos. Thank you!
@Ace-443 жыл бұрын
I didn't think this would actually work but it did! Took me a couple tries cause my rope was to thick but I eventually got it. Thanks so much for the video! You saved me almost 400$!
@davidhiney916421 күн бұрын
I used clothesline rope, about 3/16" as he said. Worked great. This guy would be a fun friend.
@assley19879 ай бұрын
We needed to remove the back window on a 1990 Ford ranger. This video made that possible! Thank you so much! 😊
@maxmayhem97785 жыл бұрын
Terrific video. I did this sort of replacement once 30 years ago and now my bad memory is no issue at all. I will just follow you.
@mikeoswald80533 жыл бұрын
Brad, thank you for the clear instructive video and especially the advice about trying it again if first you don't succeed. I just installed a new sliding rear window and seal in the restoration of an '83 f150 Flareside. Doing it by myself was not easy, especially at 80 yo. The first try I couldn't get the seal, but the second time was a charm.
@autoglassamerica3 жыл бұрын
Very welcome!
@VenezuelaNow Жыл бұрын
You rock brad thanks for the great video, took me 4 mins to install my window and never yelled once at the woman helping me... to be honest we watched another video before yours and the idiot made it so complicated my woman didn't want to help me
@ashleyst.angelo16613 жыл бұрын
Thank you so much ! For an auto mechanic I know engine's but was nervous on glass but you made me confident enough to try this on my own !
@JoeRocket-sf6qs4 жыл бұрын
I tried the install trick I was at my window for three hours beforehand ,it took me 5min no lube, no joke with this trick whoever came up with it was a genius.thankyou.
@rogersears39345 жыл бұрын
Its great to see a how to video without all the drama some guys have making these ! Great job guys thanks for the help !
@Snickls3 жыл бұрын
I'm getting ready to remove the rear glass on a 78 pinto wagon and weld my customer's broken hatch, this is a great, very informative, and above all, to the point video. Thanks for the info.
@newday897 жыл бұрын
Thanks so much Brad..took it out with ease last fall..just put it back in tonight .and your method made it so easy to install..had it in in 5 min. Awesome video.
@mattguilford15033 жыл бұрын
Thanks Brad. I think you just saved me about $200 bucks for 10 minutes worth the work!
@jackmorris76775 жыл бұрын
Thanks for the video Brad. I was able to get my old window out and the new one put back in in less than 10 minutes. Very helpful!
@dennyperdue1608 Жыл бұрын
Thanks to your great video I actually pulled out the broken slider and installed the new one in 30 minutes. Well Done Video
@wolfy19874 жыл бұрын
That rope trick is nice. I've never done a window like that, but I've had other projects in which that method will help greatly!
@cutfirsthuglater32406 жыл бұрын
Thank you,thank you, thank you!!! Your video tutorial was just fine and I had no problems replacing the window for my 99 F250. 👍👌
@marcs39827 жыл бұрын
well, Brad, you're the MAN!! I just did my f250, worked perfectly! Thanks sooooo much! I was really dreading doing this!
@pmorris357 жыл бұрын
This is awesome i feel pretty confident to take on the task got a 96 you made it look super easy thanks for the video much appreciated
@jsmcguireIII5 жыл бұрын
genius move with the chord. thanks brad
@emilymorataya53692 жыл бұрын
Wow! Thanks this is the best video instruction I ever have found. I am impressed by your knowledge and how easy you make this project. I bever done anything like thus before. And I thought window removal was very difficult. Thanks again sir for teaching us what us all about .
@nickdelarosa59043 жыл бұрын
Thank you so much for the rope trick. I followed your instructions and extra tips and it made my window replacement so easy. It helps to really clean and prep before installing. I have a 97 F250.
@guyforlogos7 жыл бұрын
Hi, Great job! I did this to my 79 f-250 after watching your video and it worked perfect! Thanks for posting such a helpful video.
@joelrawlston12066 ай бұрын
Brad you made that look so easy and it's not all that bad thanks
@tonythetiger1man4 жыл бұрын
Great video and very descriptive ! Look at all those Ford OBS body trucks ! 😍
@harleykirchoff83504 жыл бұрын
I wish I had a junk yard like that around where I live
@hectorsierra5066 Жыл бұрын
EXCELLENT YOU WENT RIGHT TO THE POINT. EASY AND ACCURATE. THANK YOU.
@fredtillman30503 жыл бұрын
Thanks...this was always a mystery to me , now I can remove my window and replace it with a pop out window..thanks again.
@eb08008 жыл бұрын
Thanks for the great info Brad! Didn't realize it was so easy. Love the Ford truck graveyard in the background. I saw one that looked just like my 87'.
@borrisfatboy8784 жыл бұрын
Wow I can't believe it's that easy and quick! I'm going to try it right now😂, just kidding, I'm not ready yet. Thanks you're saving me money I could put towards my project truck.
@roberttaylor89187 жыл бұрын
Thank you so much for making this video. I used your guidance to remove and install a rear window on my 1988 F250
@bubbaleroy94546 жыл бұрын
THANK YOU Brad! That's how Jeep CJ-7 windshields are. Not the two piece rubber and glue. And the local glass shop quoted me high (120 bucks sounds high, right?)...so I found your video.....now If I don't break it......I'll have a new skill
@sciflyer675 жыл бұрын
Great tutorial! Thanks for taking time at the junkyard to do it.
@2TECHSS3 ай бұрын
Great work Bro Thanks From CHILE 🇨🇱
@2H25214 ай бұрын
Excellent tutorial, thanks!
@evelynalvarez8963 Жыл бұрын
The rope idea was genius.
@thomasdickson355 жыл бұрын
That rope trick is amazing! Thanks
@davidmacbayne Жыл бұрын
Great clear video that is a big help - THANKS
@Moroni1085 жыл бұрын
Thank you so much for the video! Dang you made that look easy!!! I sure appreciate it!!
@Pursnikity_200223 жыл бұрын
Gonna try it this weekend. 07 Chevy Hoping for the best!
@josephdupont5 жыл бұрын
Thank you so much for this I have a Ford Ranger which I want to open up to a sleeper camper in the back and if I can take the window out at least a lot of it out this will work out good I can even put a framing near I guess and grape some vinyl vinyl clear vinyl stuff so it can make sure the rain that comes through will drop down between a truck the great video thanks so much very valuable
@zackrose60198 жыл бұрын
Awesome. I"m working on a project where I'm welding the back of a nissan cab to toyota camry "truck-car". This helped me a bunch save the glass from the welder
@stephenfresh17547 жыл бұрын
Zack Rose I have to have pics man!
@stephenfresh17547 жыл бұрын
Zack Rose please send me a pick at pcrefresher@gmail.com or friend me on Facebook it's Steve freisch
@kingdomnate69064 жыл бұрын
Dude, you are my hero. Worked great for me thanks.
@roryalgate8724 жыл бұрын
Love your video... Thanks from Australia.
@stevenmorris22936 жыл бұрын
Nice job Brad. Your a good teacher. 👍
@rogersears39345 жыл бұрын
We replaced a broken slider with a flat glass and new gasket . I wasn't easy & took four tries but we got it ! Don't give up ! lol It would be much easier with an old gasket
@michaelbean46265 жыл бұрын
Great video ! I hope it goes as easy for me as you make it look. Much appreciated.
@DarkWizardPrince5 жыл бұрын
cool video man. thanks. i gotta do this to my ford ranger.
@mrsullivantutors Жыл бұрын
very cool, and the dealer wanted how much?:)
@spangas57995 жыл бұрын
simple engineering genius! Nice work.
@TOWNCARBUBBA874 ай бұрын
good job brother my next project. thanks for sharing 👍
@debann28643 жыл бұрын
Thanks for the video. I just wanted it done before winter and I’m by myself so I ended up getting a new slider and gasket installed on my 83 f150. It still leaks. I had a 4 piece vented slider but the glass shop replaced it with a 3 piece. Does that matter? Also,I got a new cab light, before I put it on I covered the hole to make sure that wasn’t where the leak was coming from.
@rando1653 Жыл бұрын
My truck is a 1993 dodge dakota but I fucking love it... I found the rear glass like brand new in a local junk yard and that is why I'm seeing this video tho
@davidmcgill58513 жыл бұрын
WOW GREAT VIDEO YOU MADE IOT LOOK SO EASY THANX
@autoglassamerica3 жыл бұрын
Glad it helped!
@colorado45213 жыл бұрын
Great simple way to do this thank you!
@gypsycowboy222 жыл бұрын
Great video , Sir .. Thank you 🍻
@911GNX4 жыл бұрын
Outstanding tutorial!!! Thanks you so much!!!
@paulaagaard7641 Жыл бұрын
Well it's in but the gasket didn't cover the bottom corners on the outside. Did I mess up or is that normal on a aftermarket slider?
@timothymatthews70287 жыл бұрын
Thank you so much brotha huge help.great vid and brilliant with the rope
@BojanglesDavid3 жыл бұрын
This helped me, thank you for the info! Great video
@jessicagruener40663 жыл бұрын
On one video I saw that you removed the back seat upper back rest and the seat belt before installing. This one you didn’t. Does it have to be done? Difference between straight cab and extended cab?
@swstmoney6 жыл бұрын
This worked for my Jeep J truck, Thanks for the video.
@rhinoconnor12 жыл бұрын
Thank you brother. I appreciate the walk through
@MrJeb7074 жыл бұрын
Man you're awesome. Made that look easy!
@Jefffromwapak7 жыл бұрын
Very nice Brad. That takes a lot of apprehension out of my situation. Thanks!
@marcs39827 жыл бұрын
im going to try now! 93 f 250. you made it look easy!! thanks
@autoglassamerica7 жыл бұрын
good luck
@charliebruff57827 жыл бұрын
And here I was stressing because my rear window was solid. Now I can get a slidy window
@edwardd.meyersjr.258 Жыл бұрын
Mine has a hard plastic insert around the exterior of truck. Should I pull it out to remove? I'm guessing it's to make the rubber set tighter in frame. Thank you.
@autoglassamerica Жыл бұрын
You should
@alecwilliamson77166 жыл бұрын
Great video helped me a lot appreciate it
@howpaul75537 жыл бұрын
cool hopfuly a 1984 backglass will go right in my 73 ford as it dident change from 73 to 97 should be fun
@donaldsmith93296 жыл бұрын
Thank you for your video God bless you
@Cruiseomatic3807 жыл бұрын
What boneyard are you in? There are many trucks there that have parts I need. Old fords are hard to find good parts for.
@Bushcraftapprentice6 жыл бұрын
Hey Brad! Thanks so much for your great videos! I have a 1987 F150 with a sliding rear window. I have to replace the sliding windows and have been trying to figure out how to get the old ones out. Seeing this video, I think I have to use your technique shown here to remove the window completely. That will allow me to remove the old sliding windows and install the new one. Can you please let me know if I am on the right track?
@Andy473575 жыл бұрын
its easier to break it and call insurance and get safelite to do it
@paulaagaard7641 Жыл бұрын
Does a regular window take the same gasket as a slider? Just broke mine. Thanks for the video.
@autoglassamerica Жыл бұрын
they do not The factory slider uses a different gasket
@paulaagaard7641 Жыл бұрын
@@autoglassamerica thank you very much! If I get a used one I will get a gasket too.
@bobtailsthecat11 ай бұрын
you are the MAN
@kandacee9015 Жыл бұрын
Thanks, super helpful 👍
@bandal4945 жыл бұрын
Worked great on my jeep j20.
@rickmoore2153 жыл бұрын
GENIUS. .. .Thank you very much!
@alfredocantu45546 жыл бұрын
Thank you very much I learn something new
@jimdewater68025 жыл бұрын
brad, you rock! thank you!
@PrincernPrince2 жыл бұрын
Dude that's awesome!
@mobius9725 жыл бұрын
DAMN good video.....just about to do this to a project truck
@autoglassamerica5 жыл бұрын
thx
@benvasilinda97296 жыл бұрын
I watched ur video because I had a huge limb fall on my 2000 Cadillac Seville and it shattered the glass. I tried getting the seal out but it was ruined. I went to the junk yard to get a new back window and I tried to save that seal as well but it also got ripped up and to destroyed to salvage. I was able to get the window out and I got the window installed onto my car but I have no rubber seal that goes around the window. Where can I order a new one? I called my local Cadillac dealer but they said they couldn’t order that for a car as old as mine.
@philschuchman73492 жыл бұрын
Can I ask what junkyard you are at?
@orlando97785 жыл бұрын
Great Video
@63694364 ай бұрын
Thanks for sharing the knowledge
@GbodyMafia3 жыл бұрын
Very helpful thank you sir.
@doober83493 жыл бұрын
Wow this was very helpful thx
@andrewdixon277311 ай бұрын
Thanks brad
@jeffreytanner4361 Жыл бұрын
I have a 2003 Dodge Ram 1500 will that work to replace the rear window? Thank you.
@autoglassamerica Жыл бұрын
yes
@sireposey85563 жыл бұрын
Genius, thank you for sharing
@derellcaldwell8653 Жыл бұрын
Hello sir, so would this same process work on an 05 Silverado rear sliding glass?? I want to remove it from the junkyard.
@autoglassamerica Жыл бұрын
no
@fluxcapacitor16217 жыл бұрын
You're awesome. Thanks!
@saulmartinez3555 ай бұрын
Thank you sir
@CheckyBeeBees6 жыл бұрын
yeah, does it not need sealant?
@edwincastillo76547 жыл бұрын
where in the world is this place. I need parts!
@simplyfacts44996 жыл бұрын
I was thinking the same thing, so many obs fords
@ZZROBProductions5 жыл бұрын
Anyone find out where this is?
@SwiftGearheart245 жыл бұрын
I just searched the website on the screen and found it. 10199 Roop Rd, Kingsley, MI 49649
@SwiftGearheart245 жыл бұрын
@@ZZROBProductions Just googled the site on the screen. 10199 Roop Rd, Kingsley, MI 49649
@SwiftGearheart245 жыл бұрын
@@simplyfacts4499 Just googled the site on the screen. 10199 Roop Rd, Kingsley, MI 49649
@terrymoore77547 жыл бұрын
did'nt find video to show me how to install a back window for a 1997 ford ranger. found 2 guys that talked the job thru but no video on the actual job
@jeffgerou32472 жыл бұрын
CAN EITHER THE R OR L SIDE WINDOW BE REPLACED ONCE THE WHOLE WINDOW IS REMOVED FROM VEHICLE & THEN PUT BACK IN.
@autoglassamerica2 жыл бұрын
Maybe but you need to follow the plan in the video if you have questions contact me at Technical Support