Automatic Electric Can Crusher - DIY

[@matthewprince6157]

You look like the proudest Dad in the world and I'm here for it.

[@danimalshouse]

It is kind of embarrassing when I watch it back but oh well, we finished it!

[@MNDashcam]

Excellent straight to the point video without 6 minutes of intros plugs sponsors and begging for subscribers.

[@danimalshouse]

Thanks. I actually make it a point not to ask for anything from the viewer until they reach the end of the video.

[@CERIHATTON]

Thank for the information on speed reduction. Very smooth crusher. Thanks from UK

[@wayne-oo]

Great work !

[@scanner1957]

This is great! With reducing the rpm from 1750 to 52 by gearing down the machine generates enormous power to crush the cans. Thank you very much for sharing this concept.

[@danimalshouse]

You are correct. I found this out when I had problems with the belt slipping. I couldn't get the belt tight enough which is why I added a chain for the last step. Thanks for watching!

[@baconaz24]

Wow

[@gregorysampson8759]

Very cool! One suggestion to add a flywheel on the 2nd pulley. This way it maintain a more consistent speed and even out load on motor.

[@danimalshouse]

Great point!

[@stephenfiore9960]

…now that’s something you probably learn in mechanical engineering .

[@Superduty_59]

Awesome can crusher idea! I like this better than pneumatic because of needing a more accessible source of compressed air.

[@danimalshouse]

Glad you like it!

[@tux008]

Excellent quality, though overpowered rig. So beautifully done 👌

[@popcornshiner3937]

Man, that is fantastic, a beuatifull machine, I have always wanted ti biuld a can crusher and have seen hunfreds of devices over the years but I do love thiis one. 10/10

[@danimalshouse]

Thank you! It was a fun project. Daughter got an A on it. I appreciate the kind words.

[@unstablenester941]

My wife thinks I am the only person on the planet who thinks about these things. Late last night, in a dimly lit corner of my garage, hunched over a desk, designing, fabricating, and assembling a popsicle stick prototype mock-up of my can crushing device, she commented that normal people don't do this. I believe that she has gone utterly insane. Soon, the can crushers will rise up, and the non believers will be made to work un crushing cans, so they can be crushed again! BWA HA HA HA! Thanks for sharing I really like your design and ideas. I already started into a beer and was feeling goofy there.😂🍻

[@danimalshouse]

Not sure what the emoji is for "that's an awesome comment that spoke straight to my soul" but you deserve it. I had pondered the design for years so don't worry, you are not weird. Rare perhaps, but not weird. Thanks for sharing!

[@theforgotten081]

I think a flywheel would help with the stalling, just my 2¢ Awesome build, it looks awesome! Good job!

[@jonathansgarden9128]

I love this stuff. You don't even know the calculations, you just made it work anyway! And you learned along the way

[@danimalshouse]

You are correct. I had no idea what the calculations where. I just adapted to how things went and didn't stop until it worked in a way that I was satisfied with. Thanks for appreciating!

[@jgregg7100]

forgot where I heard it but "often times the job could be done, and well done by the time that the best thought out idea could be written on paper"

[@chadgardee1496]

This is the best one I seen yet good job you and your daughter must have had fun building this

[@danimalshouse]

Yes. Thanks for watching!

[@BigGuyJT]

I am still rockin that same pioneer receiver to this day!

[@danimalshouse]

Bought it at RadioShack lots of years ago. Thanks for noticing!

[@PapaDutch]

Brilliant. I knew there had to be something more efficient than a ram!

[@danimalshouse]

I had the same thought and was happy I could bring this to life.

[@stevelindsay3643]

You could have used a variable speed motor with a router speed controller and not needed all the pulleys to step the RPM down. I need to make something similar for my foundry. I've thought of different ideas including this one. Yours does work great. Very well made.

[@karrijones365]

Hi my name is Carrie Jones from Helena Montana I just wanted to let you know how interesting your video was I have cerebral palsy and used to love Recycling and crushing soda cans I had to stop because it got challenging for me to and use a manual can crusher I just finished watching your video and was very interested in it because I have been trying to look for electric ones and could never seem to find one the one that I found were too expensive so when I saw your video I I thought oh that is so cool

[@danimalshouse]

Thank you for sharing Carrie. I was actually just in Helena during October of this year to watch my daughter play basketball. What a coincidence. I'm glad you like the idea, it was fun to make. Take care!

[@GeneralChangFromDanang]

Definitely the way to go. I built a pneumatic can crusher with air kickout, but it's still just too slow. I'll be going this route for the next one.

[@danimalshouse]

Thank you for watching and I agree. This one had some layers to making things right but it works great.

[@zvast]

Yours is the best Ive seen so far. You should make them for YT club.

[@danimalshouse]

Thank you. Once I got into it a bit and things started coming together I got the feeling that it could be really great. Thanks for appreciating and commenting. Take care!

[@madwilliamflint]

That's excellent! I've been looking to build that exact (ish) thing. Came to the conclusion that 1/2 horse was gonna work just fine. Ordered some pillow blocks and a pully or three today then found your vid :-)

[@danimalshouse]

Have fun!

[@Musicnest.]

Good job that looks great might try and build one

[@argonthesad]

Teacher: So your Dad helped you with this? Daughter: Just a tiny bit.

[@danimalshouse]

Yes. If I'm being honest I may have been a burden to her since it took much more of her time than it would have if she did a basic project on her own.

[@nativefish]

Any chance you could share shaft lengths, pully sizes, and gear sizes? Really wnat to build one of these.

[@UTF-4]

Did you make the wooden support block and platform?

[@danimalshouse]

Yes, out of hardwood. The first version I made was only 3/4" thick and everything kept bending and cracking.

[@keshatton2334]

Would it be possible to add another crusher on the opposite side so you could have a 2nd crusher on the return stroke? More bang for your buck, very cool idea i like the simplicity of it.

[@danimalshouse]

I like the imagination! I suppose, yes, but it's all one person can do to keep one hopper/feeder full of cans since it does 52 cans per minute. Thanks for the idea!

[@blindabinda1234]

It would be a cool series to take this platform and try engines and different motors and power supplies and things

[@danimalshouse]

I agree. It would be cool to use a gas weed trimmer motor I always thought so it was portable but then it would be a problem use indoors. Thanks for the suggestion!

[@chrisbucy7860]

Very cool design

[@dmaschy599]

I like it,it's very functional.good job.

[@gazaziho]

Looks nice !! a Perfect work form a qualified person .. Thanks

[@danimalshouse]

Thank you very much!

[@demasrabonara3133]

Very exciting,would really love to have the specs,im thinking of building one myself.awesome job.

[@danimalshouse]

This is the best I can do. kzbin.info/www/bejne/eni4qGmujtyqbq8 Hope this helps and thanks for watching!

[@kadentherkildsen5982]

Can you make an assembly video? I would love to follow it step by step.

[@danimalshouse]

So I started with the base. Using hardwood I glued together what I needed and then I started to lay out the motor and the pillow blocks for the gearing down process. Once I had it pretty much where I wanted I fastened down the wooden bases for the pillow blocks and then stained/treated the wood. Next was the shaft. I heated it up with a torch and got it bent the way I wanted and then moved onto the plunger and slide. Then once I got that all mounted the way I thought was right I build the hopper for the can storage, hooked up the electrical switch and cord and called it done. Don't get me wrong, there were several little engineering fails that went into this project no doubt, but then I figured out a better way to do certain things and it eventually worked. I can't describe every process but hope this helped. Good luck!

[@smartassist9700]

How much supplies cost? Where do I get parts? Lol. Can I pay you to make/ dis-assemble / ship/ then I put together? I’m handicapped. That would help a lot.

[@danimalshouse]

Sorry I can't help other than to inspire your own ideas.

[@strider1499]

Cool setup! I need to convert about 7,500 full cans into crushed cans and am looking for ideas to save some time getting full cans emptied and crushed. I think I could replicate your crush idea with a good crank motor assembly where the gearing and crank are combined into one purchasable piece, and I could fabricate the 'crush piston and crush chute' but I still need to get the cans emptied first! Any good ideas? I was thinking maybe a sending them down a chute with a geared-down motor running a wheel with short, sharp, teeth (a ground down gear wheel) that punctures the can along the side, give it some time to drain in a second chute that could drop it into a crusher mechanism based on your concept. Clear plastic for sides to create spray protection and if we can do 30 cans a minute that would be good. The problem with draining is that the cans should not rotate if the holes are punched along one side with air holes on the opposite side (idler gear with similarly short sharpened teeth). Any better ideas? Cheers.

[@danimalshouse]

My suggestion is to keep your mind moving towards a solution and don't be afraid to fail and revise or restart. My eventual model was like the 4th or 5th try at it and the entire process was fun. Good luck!

[@SteveHamel-f7d]

OK, a reasonable albeit complex design. Will it effectively crush steel soup cans?

[@danimalshouse]

No, the belts slip. I would need to add some form of inertia mass or make everything chains to do that.

[@markjamessagaral4783]

I love your design. I would like to know all the parts so that I can make mine. This project is very useful

[@danimalshouse]

Hi Mark, I used a half horse power 120v motor with a 1/2" shaft and 1,750rpm with a 2" pulley on it to drive a 6" pulley that is mounted to a 5/8" shaft going through standard pillow blocks and bearings. Then the second gear down is another 2" pulley driving an 8" pulley that is on another 5/8" shaft going through pillow blocks and to a chain sprocket. The rest is pretty much custom made and I don't have other info to share other than it took a bunch of trial and error along the way to come up with the end result. Stay patient. The wooden blocks are 6" x 6" of solid hardwood and the base is 20" x 30" x 2" thick. It's a hefty platform so it doesn't bend. Good luck Mark!

[@bidders77]

nice, surely this can be upscaled for wood splitting as well?

[@danimalshouse]

Yes you can!

[@lemturnerrd]

I'm looking to build a can crusher for my Veterans organization so when can continue on with our can recycling program. Would you kindly provide me with a parts listing that you used? That would be much appreciated. Have you thought about selling plans, because this is by far the best one that I have seen. I, along with others would probably buy parts from you like the double 90 degree crank lever.

[@danimalshouse]

Thanks so much for the positive feedback. This was just a one time deal for me. I made the dual shaft out of a straight shaft with a torch and my eyes to see if it looked straight. The blocks, spacing, belts/pullies, and other items where just made from scratch in a way that made them work. Sorry, I don't have plans, a parts list, or any other info other than in this video plus a supplemental video I made. I hope this helps enough and best wishes with your goals. kzbin.info/www/bejne/eni4qGmujtyqbq8

[@skxjenje1072]

Is there a way i can improve this and make it faster for my research?

[@danimalshouse]

You could increase the size of one of the pulleys to make it go a bit faster but the limiting factor is the speed that the cans will drop down into place. If the plunger hits before the can is ready, it will jam. Plus, it is surprisingly difficult to keep up with loading the hopper with one person. My option is that I wouldn't want it to go any faster.

[@CraigKelley-m5g]

Do you have a set of plans available for purchase?

[@danimalshouse]

Sorry but no, DIY one time deal. The plans exist only in my memory!

[@TeodorOlaru]

Hi, can you tell me what is the power of the main motor? I have one with 0,55 kw and i want to know if thats enough

[@danimalshouse]

The motor is 1/2 horse power on a 120v circuit

[@timothyohs8459]

How much can you build another for?Ian geting into the recycling business

[@danimalshouse]

Sorry, it was a one time build. I appreciate that you like it! Thank you.

[@shademe]

daughters science project, lol man I knew all those other kids didn't make there own! lol good job very interesting thank you for sharing

[@danimalshouse]

I was actually thinking the same thing when I helped her. She got an A while others that didn't have help got C's, just like me in high school.

[@Xemnas036]

Do you happen to take commision? I do not have the means to build this where I live, but I would love to have one.

[@danimalshouse]

Sorry but no. I just made it as a one time project and do not have any intentions of repeating the process. I do appreciate the interest.

[@Dwperret]

Yes… very cool…I read several comments…asking for parts info… I need to build one…please send parts info if possible …. Thanks

[@danimalshouse]

Thank for enjoying the demonstration. These parts were put together with a combination of a farm supply store, a home improvement store, and my own pile of items laying in the garage cupboards. I'm sorry but I cannot supply a useful and detailed parts list. I did do a video on the measurements that may be helpful to some. Here is the link and thank you for commenting! kzbin.info/www/bejne/iWLVhqKlis2Nd9E

[@lbslott]

Awesome! Have you thought about adding a funnel at the top to pour cans in?

[@danimalshouse]

Honestly I'm kind of done with this project but I did spend some time thinking about a funneling option like you suggest. For now it goes so fast that I have to load the hopper with both hands and keep it loaded to ensure that the cans don't get sideways inside the hopper when they fall. Thank you for watching!

[@bluezz5002]

You don't need all the complex gearing, you can simply use a bldc motor and controller + the chrushing chamber and hopper

[@danimalshouse]

You are correct but at the time we were just happy to wire the switch correctly so we wouldn't shock ourselves. If I did it again I'd have updated ideas. Thanks for the tip!

[@920rookie]

@@danimalshouse The belts, pulleys, sprockets and chain are fantastic, mesmerizing too. 'Steam Punk' as some would say. I'd want a little guard around the plunger though, as that looks like some finger clipping force down there. I wonder about a vibratory hopper-feeder? Nice straight forward video too. Beautiful work like that is sure to inspire others, thank you for sharing.

[@legendaire860]

@@danimalshouse Are you willing to share some of the updated ideas?

[@danimalshouse]

Thank but I'm actually over this project for now. I have a video on the channel showing some of the measurements that I used since so many others ask about it. There's just too much to review and too many skills needed to provide a study guide. I appreciate all of the questions but I'm on to other projects nowadays. Thanks again for watching! Here is the link to the other video. kzbin.info/www/bejne/eni4qGmujtyqbq8

[@rogdog3257]

Best video ever Great job

[@danimalshouse]

Wow, thanks

[@mrstoreytime]

Awesome video and build. Could you use a transformer or a variable current controller for rpm reduction instead of gearing?

[@danimalshouse]

I suppose you could but then you would need much more torque. The rotational inertia of all of the parts help work the plunger through the initial breaking of the can's shape.

[@stephenlussier9243]

Where did you source the gears, belts, chain, and motor?

[@danimalshouse]

The motor I got from a local electrical company but could have been purchased from Supply House online or really anywhere. It is simply a 120v 1/2hp PSC motor with a base mount. The other gears, belts, pulleys, and chain came from a farm supply supply store in our area named Fleet Farm.

[@itsbro9527]

Do you use a bench power supply?

[@danimalshouse]

No, I just plug it into any outlet and there is a standard switch to turn on the motor.

[@iqbalkamils]

Hi. Can you predict how much electricity motor used in kwh just for this duration of crushing tins?

[@danimalshouse]

5 amps of draw from the motor(guessing) on average x 120v is 600 watts. 600 watts is 0.6kwh.

[@osamaomran3277]

Where can I find the same electric motor?

[@danimalshouse]

Pretty much anywhere. It's a 120v 1/2hp PSC motor. Check Grainger.

[@unholyhallars3351]

HOW MUCH FOR ONE FULLY BUILT BUT WITH THE ABILITY TO ALSO CRUSH 12 INCH CANS AS WELL. AND HOW MUCH FOR THE ONE YOU HAVE NOW

[@danimalshouse]

Sorry, it wouldn't be worth it to repeat this process and I'm not interested in doing it again. I"m onto bringing other wild ideas life! Thanks for enjoying the design enough to want it.

[@spacevikingcowboy5784]

So then what smaller motor would you recommend?

[@danimalshouse]

I think if I went smaller I'd go down to a 1/3 or 1/4 potentially but not much less than that. There's a decent about of rotational inertia there so it may work. You could even put something heavier on one of the shafts, just to spin fast, to help with the initial punch that you need to get the crush started. Good luck!

[@leebrowwski]

I would like to buy one of those to donate to a local fundraising effort based on can and bottle drives. May I?

[@danimalshouse]

Hi, sorry, not for sale or remake. This was just a one time scenario for me.

[@joesalazar770]

Actually I'm working on something a little different I'm modifying a wheelchair motor. To raise and lower the jacks. Using a 12 volt power source instead of purchasing a system that likely will not jack a loaded trailer off the truck it's on

[@yasonazairagraceo.7600]

Hello. How did you computed for all the components of this machine?

[@danimalshouse]

I used basic common sense, trial and error, and a few recommendations from my brother and father. I used zero mathematical engineering calculations. Honestly I just tried it and it worked. I'm sorry I can't sound smarter than that for you.

[@thenorstar8955]

Maybe a bicycle pedal would work instead of bending a piece of metal🤔. You've got the gear and could remove some chain links to fit and use the back gear too

[@AndikaMeta1]

Hi, can you give the name of the motor because i search everywhere and it didn't match with yours. It could be the name of brand or anything :)

[@danimalshouse]

The name of the motor doesn't matter. What matters is the HP, speed, voltage, shaft size, and mounting type. This motor is a 120v 1/2hp 1,725rpm 1/2" shaft surface mount motor. I hope this helps.

[@carlosmari319]

🇧🇷Parabéns 🇧🇷 Congratulations !!!

[@danimalshouse]

Thanks!

[@christinepittman7479]

Just wondering if you could respond with where you bought the 2 sprockets and chain?

[@danimalshouse]

I got the chains and sprockets in the farm section at Fleet Farm.

[@santipujato1529]

Hey, im an industrial designer student thats developing a prototype like this one and im struggling in founding the maths and the calculations around the rpms decrease, is there any mailing where we could ask for some help and ask you some questions?

[@danimalshouse]

Hello, so if you are an industrial designer you'll be way ahead of me when it comes to coming up with official plans for the engineering side of this project. In all ways, I "MADE IT WORK" out of shear will and basic common sense decisions related to mechanics. I guessed on the motor size, I guessed on the belt sizes, and I guessed on the linear slide working correctly. Then after a few trial runs I kept on working on the project until it was complete. For the pully sizes, it's just a simple division problem. A 2" pully driving an 8" pully reduced the speed by 4 times, then a 2" driving a 6" reduced it by another 3 times, and so on. So the motor began at 1,725rpm divided by 4 made it 431rpm, and then divided by 3 made it about 144rpm and then the final change was the chain drive which reduced it by about near 2.75 for a final rpm of near 52. I hope that helps and thank you for watching!

[@dougalexander7204]

Nice job dad.

[@privatepilot4064]

Works much faster than my pneumatic Bimba valve crusher!

[@Keepitreal260]

Where are the part list or things needed for us to build? 😅

[@danimalshouse]

It's all custom, no list. You'll have to use your imagination! I do have this video that shows measurements and a bit more info. kzbin.info/www/bejne/eni4qGmujtyqbq8

[@celsonascimento5235]

Excellent

[@Raleighkleeb1]

Would you be open to the idea of building them for purchase? If so, what would it run a guy? $

[@danimalshouse]

Sorry but no. This was a one time deal for me. I'm on to the next big idea!

[@christinepittman7479]

Just wondering how tall is the rear block, you say it's 6 x 6, but height? and also, what is the size of the smaller block of wood up front? thanks!

[@christinepittman7479]

And if it's not too much to ask, where did you buy the slide for the crusher, what type? Thanks again!

[@danimalshouse]

So the linear slide was from Amazon. Here is a link www.amazon.com/gp/product/B013Y8WXM2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@danimalshouse]

The wooden blocks are 5" x 5". The shorter one is 3" high and the taller one is 9". The entire base is 18" x 29" x 1 3/4". Hope this helps!

[@danimalshouse]

I made the metal crusher with 1/4" flat steel and then I attached it to the linear slide.

[@unholyhallars3351]

What kit ne of quiet motor is that ?

[@danimalshouse]

It's just a 1/2hp 120v PSC motor.

[@nikolayleshchenko3647]

My uni group and I got a project to build a can crusher but our motor has about 15Nm of torque. What would you suggest to make our project work?

[@danimalshouse]

Hi Nikolay, you have presented a mathematical engineering question to a basic DIY guy with only basic design experience. There are many layers to learn before finding the answer to your question that I just don't have the data for. Speed, angles, weight, leverage, and drag are all unknowns. I'm sorry but I just don't know how to properly answer your question. I'm using a 1/2hp and it works so, there's that. Sincere best wishes for you on your project!

[@saed-bw2in]

What is an electric motor detalis

[@LebuNomcebo]

Where can I get this machine I need it

[@danimalshouse]

Its a one of a kind. Thanks for liking it.

[@LizardWizard_]

Thanks for sharing 🙏🏼

[@santanurana6630]

Whatbis the motor specification?

[@danimalshouse]

1/2 HP 120v PSC motor at 1850 RPM and a 1/2" shaft.

[@jiminycricket2230]

I'd like to copy your design because it works fantastic!! Its really quite pretty to look at. Can you tell me the diameter of the pullies so I can go buy the ones needed? I realize you spent the time to figure it all out likely through trial and error so if you'd prefer not thats ok. I love the use of wood. It reminds me of when they used oak in pullies as a bearing material years ago.

[@danimalshouse]

Hello and thanks for your interest. I just did a quick measurement and the first gear down from the motor is a 2" driving a 6", the next one is a 2" driving an 8", and the chain is 2" or 2 1/2" driving another 6". That takes a me down to 52 rpm from 1,750. I know you get an air conditioner condensing unit fan motor that is at 1075rpm but those are usually smaller HP, like 1/3 or 1/6. Yes it was trial and error for me, the first one was something like 75rpm and I couldn't load the hopper that fast. Even now it's tough at 52. The other thing is that I mention that the rods are 1/2" but that was mistake, they are actually all 5/8". I don't know why 1/2" came out of my mouth when I was filming. ???? Good luck!

[@treyott9638]

Do you have a parts list you’re willing to share?

[@danimalshouse]

Sorry, I don't have a parts list. I can tell you that's it's a 1/2hp motor with a 1/2" shaft and that I used a combination of 1.5"/2"/6"/8" pulleys for gearing it down. Also, I think I mention in the video that I used 1/2" shafts but they are actually 5/8" for the pillow block shafts. The motor is 1/2" for sure. The linear slide I got on Amazon and the rest I personally fabricated on my own, twice or three times before I got it right to be perfectly honest! Good luck!

[@valentineebangonsang9441]

Thats great. I will nées one if that machine. Superbe

[@danimalshouse]

Thanks 👍

[@oryanstar1010]

IM PART BLIND SO I NEED CAPS ON TO READ ALL TEXT / WOULD THE MAKER OF THIS VID PLEASE POST PLANS AND LIST OF WHATS NEEDED TO MAKE THAT ?

[@danimalshouse]

It's an original and the plans are not written down anywhere. I have however received multiple questions related to it's design so I made this video to help as much as I can. kzbin.info/www/bejne/eni4qGmujtyqbq8

[@mohamedalnabhani1354]

Question: What’re the requirements for this project? And can you show me how to make this?

[@danimalshouse]

Hello and thank you your questions. The project was several years ago now and I'm not sure what the requirements where. I believe that each student had some flexibility to engineer any project that included calculatable physics that would be demonstrated in whatever it was that they made. Then they had to write a report about how they went about making their invention. Obviously I helped out a ton with the woodworking and other mechanical things. How you can make, I'm sorry, but I can't really help with that. There's too much to explain or review. You'll need woodworking machines and experience, a torch to bend the angles on the shafts, a motor, electrical wiring experience, and the ability to weld some custom fabricated items. I don't think I can help there. If you search the channel you'll find another video that has some of the measurements listed but there's much more to it than that. I appreciate your interest and thank you for watching!

[@AlexWithAStar]

I’m curious, what’s the cost of this assembly? Debating whether or not to buy a $120 pneumatic can crusher, or to make this. I’d prefer an electric one to not have to use an air compressor.

[@danimalshouse]

The cost is going to be much more than $120 to make this. This wooden base is 2" thick, the motor would be near $100, the pulleys would be near $50, plus the pillow blocks, shafts, belts, sprockets, chain, switches, and metal. Just the linear slide was $50 alone as well. I'd guess it was over $300 to make plus a bunch of time. I guess I'd suggest choosing if you want something to crush cans for a practical cost or if you want a project with a unique group of challenges. Best wishes!

[@AlexWithAStar]

@@danimalshouse Thank you! My dad already has an air compressor so the $80-$120 premade options are best for me, though I wish a plug-in option was available for that price for portability.

[@johndurrett3573]

Much quieter then an air compressor based crushing system.

[@joelbarefoot4784]

How much $ would u take for this one

[@danimalshouse]

Not for sale. Sorry

[@lakemarine484]

Awesome Design! Did you solid model this and make prints to build by and if so what software do you prefer?

[@danimalshouse]

I did this 100% on the fly without drawings. What you see is the second version including a stronger base mount, chain on the final drive, and a linear slide to hold the plunger straight.

[@Erwin.h23]

can I have a module ?? because I want to make it sir

[@danimalshouse]

Hello, I do not have exact measurements but can offer this video as a basic reference. kzbin.info/www/bejne/eni4qGmujtyqbq8

[@NOMADdaf]

What exactly did your daughter do?

[@danimalshouse]

She was required to be with me and off of her phone while the project progressed and then she had to write a 3-page report on how and why all of the elements of the machine came together. No questioning the fact that she never got her hands dirty but we got some good quality time together. Thanks for watching!

[@ZukkyBruh]

hello good sir, i was just wonder what motor you used and how much torque was needed. thank you for your time :D sincerely zukky

[@danimalshouse]

I used a standard PSC 1/2HP 120v electric motor, 1725RPM

[@wandasanders2939]

need to know the cost of this product

[@danimalshouse]

This cost me about $250-$350 to make 6 years ago. Not sure how much it would be today. It also wasn't something I just bought and put together, several pieces of this project where created/fabricated from scratch.

[@derek20052]

How much you want for it or to build me 1 to purchase

[@danimalshouse]

Hello and thank for your interest. This was a just a one time build for me. I appreciate your offer but I'm not interested in making another or selling the one I have.

[@chasesmith7620]

Can I buy one?

[@danimalshouse]

Hello. Sorry, this one is just for me. It's like Jack Dawson in Rose's memory from the Titantic movie. The can crusher must only exist in the KZbin viewer's memory. Seriously though, thanks for your interest it's just not for sale. Take care!

[@razorduece2713]

Could you build another one if I pay you for it? I need one

[@danimalshouse]

Thanks for being impressed enough to want one. I don't have any interest in repeating this process and don't want to get rid of this one.

[@razorduece2713]

Well thanks anyways the video was cool to watch I just wish I knew how to build one I’m not that inept at building things

[@coinasourusrex1787]

so you basically did your daughter's project for her?

[@danimalshouse]

Pretty much, however, the teacher said that if she wasn't going to be doing most of the work that she had to do a 1,000 word report about how it was constructed, why the materials where chosen, and how things worked in addition to demonstrating the project in front of the class like everyone else. It all worked well. She and I had lots of quality time at my brother's shop making the wood platform, at Fleet Farm buying the hardware, at a motor repair shop looking for a used motor, and I showed her every process used. It was fun.

[@carmemsilva984]

Nossa essa máquina parece um sonho pra mim que estou começando a comprar latinhas. Num aguento mais amassar com o pé e com o enxadão. Parabens linda máquina 👏👏👏👏😍 #CarminhaPqTaipasSPBrasil💚💛

[@danimalshouse]

Yes

[@randomlyentertaining8287]

How much did all the parts cost? Because I'll pay you twice that to build me one. Seriously though.

[@danimalshouse]

Hi, I appreciate your kind sentiment but I'm out of the can crushing business! It's not for sale and I'm not interested in making another. I would guess it all cost about $300 considering a used motor for $50, the linear slide was $60, and the pulleys where around $10 each average. That plus the belts, chain, wood, shafts, stain, AC cord.........yeah, it was at least $300 I would say. Again, thanks for the interest but this is a display only. Take care!

[@elzurdo6167]

I want to buy it 😀

[@danimalshouse]

Thanks! It's officially the first piece in the Danimal's House museum.

[@clintonevans2226]

Coooooooool, I want one :D

[@bconus]

love it !

[@danimalshouse]

Thanks!

[@bearsstuff]

"Obviously I can't crush 1750 cans in one minute" -- Not with that attitude you can't.

[@danimalshouse]

I am sorry I communicated such limitations. It won't happen again!

[@danwa6409]

😂😂😂

[@pennyless4tea]

That’s cool. Nice work. Just don’t wear a tie when you operate this beast lol.

[@danimalshouse]

Good call!

[@dave434]

I read or heard it takes 22 cans to make a pound , I crush mine by hand as I finish drinking them. But Dang, I'd like to have one of these!

[@billycasagrand6168]

How can I make one one of these do you have schematic I can get somehow. I’m an average guy with no real knowledge about these kinda things and would like to know how I can make one

[@danimalshouse]

Sorry, this is the best I can do. I made it all from scratch using trial and error method. I did make this video though if it helps you can get some info from it. Good luck! kzbin.info/www/bejne/eni4qGmujtyqbq8