Autonomous Chair Ergo Operation Guide | Autonomous

[@AutonomousAI]

Shop ErgoChair Pro now: bit.ly/3wZjrlC

[@theutmoststunner]

Hi I am having issue with the chair I have Autonomous Ergo chair Pro. The issue is the seat is not releasing upwards to adjust height although I am lifingt the lever on the right side with the up arrow. Not sure if I missed a step during the assembly. Please help.

[@BluePachyderm105]

This is much better than the printed instructions, thanks!

[@AutonomousAI]

Glad it was helpful! Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: kzbin.info/door/wVcclBezpfRUog4h89DjIA

[@EnZeoYT]

come back to this every once in a while to tweak the settings and stuff. love this chair, had it for a few years. my advice to any buyers/ new owners would be to get armrest covers! mine has some unappealing wear and tear i couldve prevented with some comfy covers

[@belsekar]

Love the chair so far. I'd recommend putting a QR code for this video in the instruction manual.

[@AutonomousAI]

Thank you for your constructive comment, and happy to hear you're satisfied with our product!

[@asianlover1402]

there's a lot of bad reviews online for this chair saying that it's not worth the money, all I know is that after a week of using it my sciatic nerve pain is all but gone. Well worth $500 in comparison to longterm physical therapy

[@stephfu7747]

Thank you for the video breakdown. I wasn't able to use this chair to its full potential

[@AutonomousAI]

Thank you so much! Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: @UCwVcclBezpfRUog4h89DjIA

[@alyssssa551]

I just got one. I'm a 5' 3" woman and I love that I can adjust every part. The head rest is slightly too tall for my head still but tilting it down and with all the other ways to adjust it its still very comfortable.

[@lionheart1827]

Much better than the printed instructions. I didnt even know the lumbar support pad was adjustable and the lever on the back of the chair doesnt explain what its actually supposed to do either in the manual. Video is way better.

[@KirstenYeager-k2x]

Best chair! I have bought 10 for my office and another 5 for my home. Holds up well, none have had any issues and I have had them all for 2+ years.

[@randomthoughtstech]

I just leveled up my chair skill by watching this.

[@paulthomas3888]

Ditto, the video does a nice job of showing how to best use all of the functions....no so obvious in the manual that comes with the chair

[@AutonomousAI]

Thank you for your kind compliment. Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: kzbin.info/door/wVcclBezpfRUog4h89DjIA

[@ThatKidVertz]

thank you! i just got this chair today and I'm loving it! best $400 I've ever spent!!!

[@AutonomousAI]

So happy to hear that! Thank you so much for choosing Autonomous!

[@jayman4581]

Its $499 now wtf

[@jayman4581]

@@AutonomousAI can you make it $400 again

[@Algebraiic]

absolutely LOVE this chair! it’s the best i’ve ever owned yet.

[@AutonomousAI]

Happy to hear that you love our product! Thank you, friend.

[@a8lg6p]

OMG, it can recline! All this time I thought the lumbar adjustment was the recline, and I was annoyed that this super-expensive chair couldn't even recline very well! 😅

[@worldfishingfrenchies]

I bought it and I have mixed feelings. Don't get me wrong, its a good chair... but I give it like 7/10 1. Everything is adjustable, but with a real small movement... Ex. : the arms move frontward and backward.. but I would like them way more back so I can get closer to my desk, as a good height for your armrests is the same as the one of your desk. The arms move up... for like 2.5 inches. You can adjust the angle of the seat, but also barely... when i adjust it all the way, I still feel like im sliding off the chair... putting my pants deep into my butt crack. I could fix this by adding 2 spacers on each side on the front screws of the seat.. its now... almost there ;P 2. The seat is really soso... It's one month old and I can almost feel the plastic.. I am a bony 175 lbs... 3. The fabric of the back rest is ruining all of my suits.

[@AutonomousAI]

Thank you for your honest experience. We will consider some points to make an upgrade on the next chair ;)

[@lew708]

Can’t WAIT to get this chair in...Hopefully it will be able to ship sooner than the current expected date.

[@logan2553]

LivSimple mine wasn’t expected to ship for another 2 weeks. it just randomly appeared at my door today weeks ahead of schedule

[@AutonomousAI]

Hi Livsimple, I hope you can understand. It's a tough time now due to the Covid-19, but our team will try to push the shipping date as soon as we can.

[@---gb9vg]

do you guys plan on making an Ergo Chair 3 or something, with fixes and updates, as well as a footrest? i really like the footrest on the Myochair but was kind of bummed when the ErgoChair 2didnt have one.

[@durrellbennett947]

Awesome! Glad to kinda get a better understanding of the lumbar tension mechanism.

[@CycoWardDrew]

This chair was fairly easy to put together, the instructions were clear and I was about to follow along with no issues at all. It took me about 20 minutes to assemble. kzbin.infoUgkx5hPALGI87E991DRmXev8PUFJGrrRcONS I did stuff the back of the chair with a pillow so it wouldn’t be so hollow after taking all the pieces out but that’s just a personal preference. I also added a pillow for lumbar support because although this is a great chair and is comfortable, it’s not necessarily the best if you’re sitting 10+ hrs a day wfh but in all honesty for the price, I didn’t mind at all. It looks great in my space and easily adjusts the height when needed.

[@yoitsgiook]

For the first time in 2 years I was able to adjust the height 😂 The tension on that lever made me think I was gonna break it.

[@chrisburnett4845]

Love the chair, but wish you could tilt the seat upward instead of just flat or at a downward incline. I also wish the lumbar could go just a little bit higher, and the back tilt had just a couple more options. But you cant get everything I suppose.

[@AutonomousAI]

Thank you for loving our ergo chair! Your feedback is highly appreciated, we will forward it to our product team to improve our product!

[@Aliothale]

Amazing chair! Glad I found this product, it's a life changer. Fits me perfectly at 6'1, I could see a problem with the cushion/chair if you are over 215lb's+ or 6'3+... but if you're 75-215lb's and 5'0-6'3 tall this should be great.

[@AutonomousAI]

Thanks for sharing!

[@ahmedibrahim3339]

Yeah, 6'4 and 300 lbs ... the chair is a little low.

[@buddygalletti]

The tilt tension adjustment crank does nothing for my chair. The tension is the exact same if I turn it all the way clockwise or all the way counterclockwise. Also, the lumbar support pad on my chair does not offer any support. I wish you could adjust it horizontally instead of only vertically.

[@AutonomousAI]

Hi Buddy, thanks for your contributive feedback! We will forward this to our Product team and consider to put it in the next version :D

[@Giregar]

I heard a lot of bad things about the ergo chairs armrests. They're always moving, because they can't be locked. And because of the hardness, shape and missing horizontal rotation, they seem to be very uncomfortable after a few hours. What do you think about that feedback?

[@miguelmenindez6826]

I have one of these chairs, I'm a software engineer, I spend HOURS sitting, plus few more playing some games. I have not found them uncomfortable at all. They're a little bit more towards the hard size, but, all I care about is the actual height positioning to allow me type and move my mouse comfortably. I have not found any issues with the armrest moving all over the place or nothing of that sort. Hope this helps you out.

[@Dorraj]

It seems like ALL of Autonomous' armrests are like this. I have the ErgoChair Pro+ and they will NOT stop moving. When I asked Autonomous support about it, they acted like I had no idea what I was talking about.

[@AllistairMcCray]

They do move around a lot and the soft plastic does get uncomfortable after a while. The armrest has a lil concave design. I ordered some foam padding covers from Amazon but doesn't help they keep moving a lot.

[@edgarsi]

Great video, nice presentation brother! just got mine! loving it!

[@timportland9207]

Just got the chair and put it together. Was surprisingly straightforward - WAY easier than expected. Looking forward to utilizing it. That said, would have been even easier if I had seen the video first. Per the comments below - it's WAY better than the tiny instruction manual, and for example putting the wheelbase on upside down at the end would have been easier on my back. But all good. LOVE the video on the adjustment handles, as again the instruction manual is really small and a harder to discern. This makes it FAR clearer. THANKS for sending.

[@AutonomousAI]

Thank you so much for letting me know. I would love to know how do you feel about the chair :D Is it comfortable for you?

[@l33tster]

I was still learning features of this chair months after I got it lol. I'm 6'2" and it's by far the comfiest, best fitting thing I've ever sat on. Bloody excellent

[@AutonomousAI]

Happy to hear that the chair has been well worth the wait for ya, and that the video was helpful! Subscribe to our channel to be updated on the latest deals, launches, along with more helpful videos like these!

[@katelovespizza]

are you British? the ‘bloody’ gave it away😂🤔

[@l33tster]

@@katelovespizza nah haha, Canadian. Just picked up a few mannerisms Cantbelievehesnotbritish! 😂 Cheers

[@katelovespizza]

@@l33tster OMG! 😂 Canadian, eh? would you recommend this chair for long hour usage btw? :)

[@l33tster]

@@katelovespizza Absolutely, I'm planted in this thing for about 10 hours or more a day most of the time and it does the job no prob

[@jeremyashcraft2053]

best chair i've ever owned

[@AutonomousAI]

Thank you sooooo much

[@TheCloudyWolf13]

How many settings are there for the seat tilt? I can only get the chair locked into 2 settings, one tilted up and one tilted down, I cannot get it locked anywhere in the middle

[@kovsion4424]

I'm trying to decide from this or the myo because my "gaming" chair gives me back and neck pain.

[@AutonomousAI]

Hi there! For a more detailed comparison between the Ergo and the MyoChair, please visit this link, hope this helps!: www.autonomous.ai/compare/office-chairs/ergonomic-chair-vs-ergonomic-computer-chair

[@venture7o7]

You decided on one?

[@ernstmucke8731]

Okay, this vide is EXTREMELY helpful. Thank you. Don't loose it. 🙂

[@AutonomousAI]

Glad to know so! ❤️

[@joramsim]

YOOOO this video finally helped me realize where the problem with my chair was :D

[@kyle-qw5yx]

Sitting in the chair gives me very bad lower back pain. Is it possible to remove the lumbar support?

[@AutonomousAI]

I am afraid that we can't. Have you tried to adjust the lumbar support?

[@kyle-qw5yx]

@@AutonomousAI Yeah, I've moved it up/down. I think I have an issue because my lumbar doesn't really have any curve to it.

[@AutonomousAI]

The lumbar support is undetectable from the backrest :( In this case, can you please help me provide your order ID so I can assist you better?

[@francesco-dc]

I just got it. Awesome chair!

[@AutonomousAI]

Thank you for your kind compliment to our ErgoChair. Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: kzbin.info/door/wVcclBezpfRUog4h89DjIA

[@azndoodle1]

I would like to see a video of how proper adjustment in relation to a desk!

[@TheCrito1]

I didn't know so much about my chair. Good video.

[@AutonomousAI]

Thank you for your comment. We're glad to hear it's helpful :)

[@lalolalo1233]

shhhh...got mine preloved in almost brand new conditions. Here are my first impressions, yup the cushion seat bed isn't the best I can slightly feel the metal underneath between my butt, wish it was mesh but plenty of room for the hips and legs. the lumbar support piece kina pokes the spine a little but forces one to not slouch (a good thing) and finally, the headrest keeps detaching from the base when adjusting the height, not sure if guide where it seats is broken or something but I can tweak that with a few screws. Everything else, it's great, adjustments, arms, smooth casters, and quality materials, half hour learning curb, and yeah! no squeaking for now.

[@AutonomousAI]

Happy to know your experience using our chair. Thanks for choosing us and the review also, friend!

[@Janman81]

Good video - I had no idea how to do this based on the paper instructions.

[@AutonomousAI]

Happy to hear it was helpful! Subscribe to our channel for more helpful videos like these, as well as to stay in the loop about our latest launches!

[@Ahmso]

what do you do when the tilt no longer locks and the seat keeps fluctating from flat and tilt?

[@AutonomousAI]

Can you please help me send your order ID to [e-mail] for further assistance?

[@Ahmso]

@@AutonomousAI the chair was a gift from a company i worked for, so I do not have an order ID number.

[@AutonomousAI]

I am very sorry but this is hard for me if you can't provide the order ID :(

[@Ahmso]

@@AutonomousAI yeah I figured that much out already. It Is why I had to buy a new chair.

[@InfoSecTech]

My seat wont slide anymore. It looks like the mechanism for the lock with the metal bar is working fine. Any ideas?

[@carolinamcgarity2135]

Thank you!! This video was very helpful for figuring out how to adjust my chair.

[@AutonomousAI]

You are so welcome!

[@haaigsouvalian9657]

I can't adjust the height of my chair the handle seems to be stuck.

[@AutonomousAI]

Please help me send a short video to [e-mail] for further assistance.

[@kshe2592]

Thanks! I swear I love youtube community. My legs were swinging all day until coming here and finally looking up how to lower this bad boy 🤣🤣🤣

[@shizyninjarocks]

Next time take a chance and mess around with the nobs until something explodes.

[@Javi-sk4gz]

This video is awesome, thanks for making it!

[@AutonomousAI]

Glad you liked it!

[@juanreyes3336]

Is it just me or is the lumbar support really difficult to adjust? Feels like I'm going to break it everytime I try to slide it up or down.

[@joshuasamuel]

Hey Juan! My lumbar support adjustment is so stiff! I can barely move it. I'm going to try and message their support team.

[@AutonomousAI]

Thanks Juan and Joshua for your feedback. If you feel hard to adjust it, please support me with a short video showing how you do it so I can assist you better.

[@Hawtload]

Great instructional video. I'm reclining in my EC2 right now and it's amazing for kicking back and watching long YT videos. So much better than the chair I had before with had no headrest or reclining.

[@AutonomousAI]

So glad to hear the chair has been serving you well! And feel free to subscribe to our channel to get the latest deals, launches, as well as more helpful instruction and guides videos

[@manninggrinnan621]

I was so excited to order this chair. But for me it is terrible. I have two main positions: leaning into my work on the computer and leaning back watching movies. It is ok, not great but ok, leaning forward. Leaning back is terrible. The seat base does not tilt back with the back so your back has to bend in the small of the back.and you feel like you're going to slip forward off of the chair. Also, the chair does not "hold" you. Rather than feeling well supported everywhere, you feel like you are sitting ON the chair, like you might sit on a bench.

[@AutonomousAI]

We truly appreciate your constructive criticism, and sincerely apologize that the ErgoChair didn't live up to your expectations. However, we do have a wide selection of other chair options, with very different characteristics, that can hopefully satisfy your needs. Hopefully you can give us a second chance to better serve you in the near future!

[@gqigg]

gas lift height? plan to buy the chair but i need to know if the chair fit my set up. i need to know how many cm the lowest gas lift with the lowest handrest from the ground and how many cm the highest gas lift with the lowest handrest

[@RayDeeuhL]

had this chair a year now, great chair. ONLY thing its missing is being able to go 180 degrees and lay down in it. recline angle isnt comfortable at all

[@elijuvan4131]

Good to hear it has held up for you. I just got mine and I am loving it! Waited over a month to receive due to covid and an increase in demand for chairs. The tilt angle actually works quite well for me.

[@AutonomousAI]

Then I must change the name into the Ergo Bed...

[@Recise]

I am having an issue with the seat tilt (0:25) and the seat will not lock in, no matter what position the lever is fixed in. If it does lock in, it is 1% of the time and it is only in the position where the seat is tilted the most forward. I am trying to have it tilted back, but it does not stay. The seat just keeps rocking back and forth, regardless of the position the lever is in. I can see on the bottom of the chair that the rod attached to the lever won't go all the way through to prevent the cushion from moving. During that 1% of the time it stays, I can see the rod go all the way through. Any ideas, please? I just got the chair earlier today. :(

[@AutonomousAI]

Please email to [e-mail] with your order ID and the short video of the seat tilt so I can assist you better.

[@katherinemorgan5364]

I just got my chair and adjusted the height as far up as it would go, but it really does not sit high enough for me. I don't suppose there are any tips to get it to adjust higher?

[@JustnSlayer]

i had to go back to my old chair cause i couldn't get this one high enough. Sitting too low gave me hip pain.

[@avolovo]

Hi Autonomous! I’m interested but have a quick question: Is this chair suitable for a small framed 4’11’’ female?

[@AutonomousAI]

Hi there, please check if the height of your knees matches that of the seat from the ground and the max height for the ErgoChair Pro is 20 inches. When you consider the seat width, it should be wide enough to accommodate your waist measurement, but close enough for you to make use of the armrests. The width of the seat and back of the ErgoChair Pro is 21 inches. The height of the back of the ErgoChair Pro is 22 inches. Compare it to your own back height and you’ll know whether the length of this office chair is suitable enough for you 😊

[@pqrai2146]

This is a great product, sadly the user manual sent along with the package not so useful to assemble the chair! put a link to this video!

[@AutonomousAI]

Hi pq rai, thanks so much for choosing us. We appreciate your review and will probably take it for further improvement. You can also contact our Help Center at: autonomous.ai/help-center for assembly assistance.

[@---gb9vg]

also when do you plan on releasing a new chair with new updates and added features? (footrest etc.)

[@AutonomousAI]

I would like to keep it as a surprise ;)

[@stipeslol]

Does the seat height only move up 2 inches from the bottom position??? I'm 6'3 this could be a problem

[@AutonomousAI]

Unfortunately, It's can only be adjust to move up to 2 inches.

[@MrAnwarshah17]

bought this chair , but few adjustments are very difficult and confusing . also seat cushion is hard . long sitting gives pain in tail bone

[@AutonomousAI]

hi Anwar, Thank you for your valuable feedback. I am sorry for this issue you have experienced . Please give us a chance to assist you with this by sharing this on our Help Center : www.autonomous.ai/help-center We will try our best to make it up to you.

[@sntatw4226]

Can't find what the swevel thing do. on the right side you hve two clip, one that move the seat foward the other goes up and down. right after there is a swevel thing... what does it do

[@AutonomousAI]

Hey there, not sure which part you mentioned but may I ask what are you trying to adjust from the chair?

[@cq1026]

Was not able to adjust height. Pressed handle but it did not go up/ down when I released it

[@AutonomousAI]

Please help me send email to [e-mail] with the information of your order and the video of it so I can assist you better.

[@Turtle-Arts]

I just got this chair and it was all going well except no matter what I do I cannot seem to move the lumbar support upwards? It was at the highest position when I put it together, which was a bit too high, so I tried to push it down, but it took a lot of force to do so- way more than what is shown here. But when I finally got it to move it went too far down from the force, and now, no matter how hard I push or pull or tug on it I can't get it to move back upwards at all. :(

[@dustybin123]

I had exactly the same issue. I had my partner help me and together with quite a bit of force, we got it to move up again. First impressions with this chair is not good

[@Turtle-Arts]

@@dustybin123 ugh yeah that sounds about right. I was eventually able to get it to move after about 45 minutes of throwing my whole body weight at it. Now that it's in the right place the chair feels good, but man it is not nearly as easy to adjust as they make it out to be.

[@AutonomousAI]

Thanks for your all comments. We will check for further inspection. Usually, we tend to use strength form both hands to move it. I know it is a lil hard but it will work ;)

[@magusheart]

Just assembled mine and I'm having issues with the lumbar support adjustment. I wanted to test different heights, brought it down after a great amount of struggle and I can no longer bring it back up. Nothing as easy as what's shown in this and other videos. Any idea why?

[@AutonomousAI]

Hi Magus, sorry to hear of the issue. For further assistance, kindly reach our Customer Service team at [e-mail]. Have a great day!

[@Jack0trades]

It's so hard to pay attention to this. That groove is so hypnotic I can't stop grabbing my guitar to jam along.

[@AutonomousAI]

LOL that's how inspiration comes! Go for it

[@NatetheAceOfficial]

It's frustrating that the sliding armrests aren't lockable. I want to lean on one, and it slides out from under my elbow. This is my only gripe with the chair.

[@AutonomousAI]

hi there. I am sorry for this issue. Please give us a chance to assist you with this problem by creating a ticket on our Help Center : www.autonomous.ai/help-center

[@venture7o7]

How comfy are the arm rests?

[@AutonomousAI]

From 1 to 10 and can say it is 9? :D

[@albertoderfisch1580]

How tall is the model?

[@BlazeNarutoShippuden]

What color chair will stand out to viewers watch you on Twitch? Just wondering because some viewers like looking at a chair when you take a break.

[@AutonomousAI]

Our ErgoChair comes in a wide variety of 6 color options, so you can select any of those that perfectly fits with your streaming setup!

[@juliencad]

Hello there, is there a way to block the wheel ? Thanks

[@AutonomousAI]

Thanks for reaching out. Our team will check it and get back to you shortly!

[@AutonomousAI]

Appreciate your kind patience! The wheels of the ErgoChair Pro cannot be blocked, unfortunately. However, it is possible to add third-party wheels with locking functions (outer diameter 11mm, length 21mm). Please feel free to reach back or contact us via [e-mail] if you need further assistance!

[@junzhou5162]

Do you guys ship to Spain,if that is the case is the tax included on the final price

[@AutonomousAI]

Hi there, since we do have a warehouse in Europe, the final price on the Autonomous Spain website should be accurate, and no import tax should be charged

[@asadssination]

Can you remove the arms of the chair?

[@AutonomousAI]

It is up to you to use it or not :D

[@nazar4988]

Can you go in laying position?

[@AutonomousAI]

No I believe it is not an ergonomic position while working lol What do you think?

[@pascalsuissa4649]

I’m 6’2”, is this a proper fit for someone my height? Does the headrest hits the shoulders?

[@AutonomousAI]

6'2" is within our range, Pascal!

[@zaheerhbd]

How to lock the revolving?

[@AutonomousAI]

May I ask which part of the chair your mentioned?

[@TheHahafunnypeople]

My chair’s height lever doesn’t do push the chair up. I’m stuck at one height 😥

[@AutonomousAI]

Please help me contact [e-mail] for further assistance :( I am sincerely sorry about the poor experience.

[@katelovespizza]

I’m 5”3, is this chair suitable for me?

[@AutonomousAI]

The chair is rated best for people 5'3"-6'3" so it would be great for you.

[@katelovespizza]

@@AutonomousAI thank you for the response. brilliant customer service

[@AutonomousAI]

Thank you very much

[@victorgentili7493]

Does anyone know how to lock it to the right height? I lower my chair to the proper height. When I leave it for a while, it rises again and have to lower it every time A real pain!

[@AutonomousAI]

Hi Victor, that sounds scary tho...Anw can you please help me send a short video of the chai along with your order ID to email [e-mail] for further assistance?

[@ThatsLeoYKnow]

Are the arm rests removable?

[@AutonomousAI]

Yes it is. But I suggest you to keep that ;)

[@tsgt2007]

Are the caster good for hardwood floors?

[@AutonomousAI]

Yes, the Chair Ergo's castors work well for hardwood floors. Happy to help should you have other questions!

[@WhoisGhetto]

well done, thanks

[@AutonomousAI]

Thanks for watching!

[@NgocLe-cc4yp]

Am I able to purchase this from Australia?

[@AutonomousAI]

Of course you can! We wouldn't want our Aussie friends to miss out on one of our most highly-rated chairs!

[@hvmpxd6886]

can someone please explain the rotating tool more to me i dont fully understand it

[@AutonomousAI]

It is to help you adjust the back tilt tension. Some of us like the backrest tension firm enough to support our back well. While others tend to have a relaxing backrest with tension more like hugging the back from behind. I hope you will find my answer helpful ;)

[@AnezkaAstora]

I know the chair is super configurable, but... Do you recommend It for a VERY short person? I'm 155cm. Also, I have terrible lumbar pain because I suffer from scoliosis, is this a good chair for people like me?

[@AutonomousAI]

Our ErgoChair was designed specifically with lumbar support in mind, as both the lumbar tension and its position can be adjusted easily, ensuring firm support and comfort! The chair also comes with 5 different adjustable parts: headrest, armrest, back tilt angle and tension, seat tilt and height, so you can customize it to perfectly fit your size and liking!

[@AnezkaAstora]

@@AutonomousAI Thank you! It'll be my next chair :)

[@s78smash4life4]

Ty, this fr helped me a ton

[@AutonomousAI]

Glad it was helpful! Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: @UCwVcclBezpfRUog4h89DjIA

[@katelovespizza]

is the headrest detachable?

[@AutonomousAI]

Yes it is!!

[@jacksonsmith1472]

I absolutely cannot get my lumbar pad to move. I pushed it down on accident while assembling it and now I cannot get it to move back up

[@AutonomousAI]

Hey Jackson, can you try to move it with 2 hands pull it up? If it so hard to move, please send the email to [e-mail] for further assistance.

[@des9200]

the height adjustment on the chair isn’t working for me. the whole handlebar is pretty loose too

[@AutonomousAI]

Can you please share with me more about that?

[@des9200]

@@AutonomousAI i figured it out it works now thank you:)

[@AutonomousAI]

Thanks for letting me know

[@arleyvilela]

Ship to Brazil guys! PLEAAAASE!

[@GhostPrimeReviews]

Its a great chair but the back tilt handle doesn't do anything at all

[@AutonomousAI]

Did you try to adjust it as the video?

[@michaelrubio6079]

So my spin knob does nothing and keeps spinning... Is it broken

[@msnhao]

You need to pull it out, then spin it

[@AutonomousAI]

Was @hao Zhang's way help you?

[@c9bd415]

Thanks, easy way to see how to use the chair

[@AutonomousAI]

Glad it was helpful! Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: kzbin.info/door/wVcclBezpfRUog4h89DjIA

[@A-Wa]

Im 163cm tall, is this chair still good enough for short people like me?

[@AutonomousAI]

Of Course! Our ErgoChair comes with adjustable headrest, armrest, back tilt angle and tension, seat tilt and height, so that you can customize the chair as much as you'd wish!

[@miguelmenindez6826]

I am just 6 cm taller than you, while it might make a difference, I have to say that this chair is super configurable. I usually struggle with cushions being on the large side so my knees do not fold correctly and they hurt after a while. Not anymore with this chair :).

[@howsyourchin]

I think the chair quality control is really bad as well. the chair angle tilt function locking mechanism tolerances are really low, so even if you lock it in place, the chair wobbles up and down and makes a clicking sound. This chair is a hard pass.

[@JN1NJA]

wish the seat can go lower, my feet barely touch the ground

[@AutonomousAI]

This chair is appropriate for height from 5'3" - 6'3" I am afraid :(

[@mikeyoung5881]

Waiting for ErgoChair 3 due to 2 things: 1) bad seat cushion; 2) less ideal lumbar support which only move up and down, doesn't go forward and backward to provide firmer support. Another 2 years?!!!

[@AutonomousAI]

Thanks for your feedback! Our products won't stop developing. I will note yours on my check list for the next version ;)

[@garyco766]

How tall is the guy in this video?

[@AutonomousAI]

Hi, thank you for your question, he is about 185 cm tall. Hope this information finds you well!

[@leowong7694]

Is the chair cat scratch proof?? Just wanted to knowwww

[@AutonomousAI]

I am not sure about this.... May I ask about your cat scratch tendency? :D

[@leowong7694]

@@AutonomousAI it's all good, got it without any problems

[@AutonomousAI]

@@leowong7694 Thank you for letting me know. If you have any problem, let me know so I can assist you better.

[@yuandong1576]

Really helpful! Thx!

[@AutonomousAI]

Glad it was helpful! Make sure you subscribe to our channel for not only product usage instructions but also desk setup inspiration videos: kzbin.info/door/wVcclBezpfRUog4h89DjIA

[@kj3d812]

This chair is hands down the BEST chair I've owned, in almost 30 years of sitting in office chairs. Just wish it would go up higher for those of us who are short and need to reach desks made for 6-foot people.

[@AutonomousAI]

Hi there, although we do not offer longer gas lift for the Chair Ergo, it is still possible to add a third-party one to your Autonomous Chair Ergo. We recommend are a barometric rod diameter of 50mm (2") and an open length of 270mm (10.6"). Hope it helps!

[@reaps6780]

how tall is this guy?

[@jackcarr7060]

Thanks

[@turt4533]

changing the name and increasing the price. nice one

[@AutonomousAI]

For your concern, after considering carefully the increase in freight shipping costs and production materials, we would like to stay committed to providing the very best products and services for our customers by increasing our prices recently.

[@ashtoncorr1684]

It's a shame that most of these controls don't work on my chair (never have) and my brother's chair broke within a year (The piston) and they said to buy an entire new $600 chair...

[@bencheng1854]

seat shall have more cushion. start to get painful after sitting all day