CRANKSHAFT POSITION SENSOR REPLACEMENT REMOVAL MAZDA CX-7 CX7 MAZDASPEED 3 SPEED 6 2.3 DISI MZR

CRANKSHAFT POSITION SENSOR REPLACEMENT REMOVAL MAZDA CX-7 CX7 MAZDASPEED 3 SPEED 6 2.3 DISI MZR
In this video we will explain how to replace the crankshaft position sensor or how to remove and where the crankshaft position sensor is located on Mazda with 2.3 Turbo Engine. We explained how to remove and replace the crankshaft position sensor on Mazda CX-7 but it should work on MazdaSpeed 3 and Mazda speed 6 with the 2.3 turbo disi engine since they all share the same engine. If you do not allign the crankshaft position sensor, your car may not start, may not run good, or you could damage your engine if you run it that way.
This video may be helpful on:
Mazdaspeed 3 2.3 Crankshaft Position Sensor Replacement Removal Location
Mazdaspeed 6 2.3 Crankshaft Position Sensor Replacement Removal Location
Mazda CX-7 CX7 2.3 Crankshaft Position Sensor Replacement Removal Location
► Crankshaft Position Sensor: amzn.to/2BcYJyv
► TDC Tool ( Check for your model): amzn.to/2Bgq7Me
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@fawzichamieh3787]

I am a DIY person and thanks for your informative videos. helped me several times

[@809megatron]

Your video is very helpful and I'm grateful that you made it using the cx7 being the same vehicle I have. Continue the great work

[@JamesRobinson-ik5ql]

hello Your videos are awesome! i do have a question i replaced the timing chain and when i put the ballancer back on i put a bold in the hole of the crank pully and the car was turned over. it loosened the bold on the crank pully but now when i try to re align everything the engine only will turn 1/2 way around by hand. What do you think i need to do to fix this?

[@nourddinesaid2335]

J'apprécie beaucoup tes efforts pour le savoir faire

[@dennybruneau4618]

U guys are fantastic

[@jocelyndib483]

hi i have a 2008 mazda cx7 i have changed Camshaft Sprocket tensioner timing chain and the Solénoïde of the camshaft now i have a p0016 code just when the engine is cold and the engine tries to reduce its rpm after a one minute reset the code no p0016 ok but the engine is trying to reduce rpm but no code have you seen a problem like this before please answer

[@brucedobben7200]

With the protective cover over the harmonic balancer, is it possible to count from the lower part of the balancer backward from the bottom to find the 20th pin or is it necessary to remove the protective plastic piece?

[@karlmiller4061]

Just a heads up 2005 Mazda 6 2.3 auto part store packaging the wrong size gasket for throttle body went to 3 auto stores stores same gasket it's not thick enough

[@depaulpatterson9010]

thank you thank you thank you thank you!!!!

[@aiell]

Very helpful

[@jjgreenlol]

What if there is no holes to line up on the harmonic balancer Mazda 2.0

[@LuisLinares-u8i]

Where can I find a spindle locking bolt like that?

[@LuisLinares-u8i]

How can I contact this guy to ask him a question?.

[@danielwheeler175]

Does this work for the 2.0?

[@toyota399]

What did he say, lol. Thanks for the help

[@dannielbarton204]

I have a 2007 mazda cx7, with an engine light on an code p0302 misfire, I've replaced the plugs, ignition coils are good, an injectors are fine, is it possible the cam angle sensor or crank sensor could be creating this specific misfire?

[@orlando4406]

Hi, I have the same problem, how did you solve it? The sensor is dirty, I will try to clean it, waiting for a solution.

[@nenezaze3252]

2011 same problem here, 🙋 I did a Lot to the car, about to change the PVC valve I got SEE 👀 how everything go..

[@nenezaze3252]

It could be one those two, the cramchaft & the PCV valve. Their so cheap, You don't lose nothing by doing it..

[@alankirk6349]

Hi guys just watched your video would this be the same on the 2.2 diesel version Thank you

[@platin2148]

It doesn’t seem like it is as the wheel and everything looks different

[@ghiegloria4351]

is this also applicable for mazda tribute 2.3?

[@ChristineHauser-xf7or]

Need to know we're on 2001 4speed manual

[@rebelsbutstarsllc7051]

I don’t understand the locking pin part doni have to do this or is it an alternative

[@kevinmcknight5919]

Alternative

[@nenezaze3252]

I got Lost, when said rotating..😑😬

[@zuttoish]

doesnt it has to be on tdc compression stroke?

[@charleshawkins9162]

I would like to know all the coolant the whole the hoses go on that though. Plaskett all of that hold on water show me well all the hoses fit on them cars on that

[@JesterGP3]

So it doesn't kill you!🤣💪

[@franciscoesparza410]

I’m getting a P2088 on my Mazda CX-7 08 help!!

[@Mazza666]

I just installed cam sensor i didn't do TDC Procedure. The car starts and drives perfect, actually took a few seconds to start today. I tried to find TDC and count 20 teeth, but I only have 15 teeth on one side and 14 on the other. Is there something I'm missing?

[@dannielbarton204]

Hey mate, wondering why u changed your cam angle sensor? What symptoms did you have?

[@nenezaze3252]

​@@dannielbarton204I have a misfire, it start acting wear, it hesitate, it take too long to shift. But before I due the cramchaft i gone due the PCV.

[@alanasuares5129]

Alguna solución para el l código poo12.

[@simoehussani9270]

Rabotta khroushi

[@ChristineHauser-xf7or]

2.0