FORD FIESTA FRONT STRUT REPLACEMENT REMOVAL MK7 ST

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@barberdoug6930]

Excellent job guys. Great video. From an owner of a 2014 Fiesta.

[@Ape1X0]

Once again, you save the day. So many other videos about removing the front suspension leave literally all of this stuff out or speed though it. Thank you for taking your time and being very detailed with this procedure.

[@avion195]

Nice video. I thought this job looked easy and the video supports that assumption. It really is easy to refresh my worn front end! Thanks. Your videos are always clear and direct, avoiding unnecessary work like removing the cowl plastic and headlights.😊

[@mikem5929]

Thanks for taking the time to record this, I will be changing mine soon.

[@imageisnteverything]

Thanks for the video, very informative but you said the headlights have to come out just to remove the scuttle panel, when it doesn't at all. To remove scuttle you remove wiper arms (2x 15mm nut) push down on the joint of the wiper arm if they are seized to release them, pull the rubber lug from the side trims into the edges of scuttle out (leave side trims in place), remove the 6? Metal clips at the front of the panel (lever forward) and gently unclip from the retainer at the bottom of the windscreen (use a lubricant to clip it back in or you can put too much stress on the ws). Job done. Would make getting to the back nut a lot easier.

[@glb5053]

Thanks for the video, guys. This will also help for the 2007-2014 Mazda 2.

[@alexiselias8158]

what is the name of the bar your removed at 5:00?

[@Breyfogle126]

It's the sway bar

[@Hoodratliker]

Do you have to do an alignment on the car afterwards?

[@wedontdrivestock223]

Duh

[@SJ-hc5mg]

Hi My Friend, I have a 2011 Hyundai Elantra-DIY-er here too. Would you be able to do more repair videos on your COPART Elantra when you can:) Thank You...Love the Videos...keep em coming. Scott

[@juliomuniz6969]

What's that in front of the Strut?

[@ycn6143]

Just so you know if the bolt starts spinning on the anti roll bar you don’t need an hex key there’s a 13mm at the back you can hold it there with a spanner and ratchet it off. This guy makes simple jobs difficult

[@stealth_squidrsa6113]

Why not just remove the top and bottom cowel its alot easier gives you alot better working room

[@Hoodratliker]

Did that guy just come from a paint ball war?