These videos on this 2100 will give guys a lot of pointers for someone who never worked on one. I’ve worked on a number of these through the years and I think they’re a great carb. Also it’s big brother, the 4100. And it is like you said, a 2100 with two extra barrels. Awesome job Jeff and thanks to Cam! 🏁
@DirtyD786 Жыл бұрын
Excellent little series on the autolite 2100! Used this to rebuild mine and get my 1965F250 running. Thank you!
@Paulie1232 Жыл бұрын
Great job Jeff, love the channel, very detailed information as always 👍
@hotrodray6802 Жыл бұрын
Back in the day I replaced one of these with one from a '58 383 Edsel. Looked identical. Transferred the data tag. Throttle bores we're much larger, maybe 1/4". Had to bore the intake manifold. Dropped 1.3 sec in the quarter mile. NEVER got caught by tech. 😆😆
@jewllake Жыл бұрын
That plastic dog leg automatic choke cam is the earlier style one. Those break more easily than the later ones. The later ones are much easier to find than the dog leg ones. Gottafish carbs on ebay makes those with a 3d printer.
@blakeneysanders4264 Жыл бұрын
Good information. Thanks Jeff.
@jimmywilson1388 Жыл бұрын
This channel is a gold mine! I’ve watched a few of your videos and I’m gonna subscribe. I’m having trouble with my carburetor on my truck… It’s running rich real bad. I was high as a kite after driving it home last night…😂 Hopefully I’ll be putting a double pumper and a performer RPM intake on it soon. But I want to drive it now so hopefully I can get that 2 barrel carb sorted out.
@stevanrose743911 ай бұрын
Kinda not related but one time I took a regulator in to be rebuilt and when the guy set it on the counter I said that’s not mine and he said yes it is. It was as shiny as a new one they had cleaned it up that good. I was impressed. 👍
@80sfordguy Жыл бұрын
Yes for sure, get the choke parts then please, do an video on choke operation & setup on the table and on the engine!!!
@80sfordguy Жыл бұрын
I have a 84 Ford F-150 XLT with a crate 302 from around 2004 with a Motorcraft 2150. It’s almost if not identical to this carb in your past few videos. I’ve given the truck to my 16yr old son and he’s starting to get it back up & running as it sat since around 2010 and I had it running like a top back then. Now it barely idles, bogs down at part throttle and dies when put into gear. My son wants to fix up the old Ford and use it as his daily. I’ve saved all of your videos on these 2100 carbs so he can watch them when he won’t listen to dad on tuning or rebuilding the carb.
@stevea6722 Жыл бұрын
@@80sfordguy One of these days he'll figure out that Dad isn't as big a dummy as he thought. Hopefully you'll be around when that happens.
@80sfordguy Жыл бұрын
@@stevea6722 hopefully your right, I’m married and I’m 41 with 4 kids ages 16, 13, 12 & 8. The 12yr old and only girl will be the death of me if smoking doesn’t get me 1st. My oldest two boys are just as hot headed and smart mouthed as I was 25yrs ago, the baby he’s still a sweet kid 8yrs old. My oldest is a good kid and honor student so no complaints there but, his mouth and demeanor will get him in trouble if dad can’t show him the right way.
@vinced251411 ай бұрын
“When I was a boy of 14, my father was so ignorant I could hardly stand to have the old man around. But when I got to be 21, I was astonished at how much the old man had learned in seven years.” ― Mark Twain
@kennethstaszak9990 Жыл бұрын
The screwdriver for the main jets should be ground with flat, parallel sides. It's not so important for install but for removal it will reduce the risk of camming out the slots.
@Soundofcats9910 ай бұрын
Great video, thanks so much!!!
@hughphillips67Mustang6 ай бұрын
Hey Jeff and Cam. Question.....i have the stock autolite 2100. When the motor is cold, you pump the gas pedal 1 time to get some fuel in the carb, and close the choke. Yes? Ok. We agree on that. Good. Next, my car would not start for nothing. I ended up flooding it all the time. What i figured out, my choke was not closing. So, now i have to take the air cleaner off every time its a cold start, and manually close the choke. Then put the air cleaner on, pump the pedal for fuel, and it fires right off. As it warms, the choke opens perfectly. Are you still with me??? So, i took the choke mechanism aparts, made sure nothing was sticking anywhere. Put WD 40 on any moving parts, checked the spring in the cap, made sure nothing was broken or bent. Put it all back together.....same thing. Im about to throw it in the trash and get a Holley. But i would really like to keep the original if possible. Any suggestions?
@Soundofcats9910 ай бұрын
Thanks!
@kayeninetwo3585 Жыл бұрын
VERY informative video. I have these carbs on two of my old cars. THANK YOU. Question: Is that .177 BB that you put into that vacuum port in the choke housing the means by which you seal the vacuum for the heat riser, as you mentioned in the tear-down video for this carb a few weeks ago? I presume that's what it's for, but I just want to make sure. I replaced the hot air automatic (original) choke with an electric automatic choke on one of my 2100 equipped cars and with a manual choke on my other car that has the 2100. Both cars and carbs work well, but I'd like to get them dialed in as best I can. Thanks again!
@johnmilner7603 Жыл бұрын
Evaporust would work well on rusted parts.
@AutoRestoMod Жыл бұрын
Good idea!
@robertfogarty3253 Жыл бұрын
After the brakes,shocks,springs,carb is next
@Beartracks51 Жыл бұрын
Gute stuff
@AutoRestoMod Жыл бұрын
Danke
@Agent22817 Жыл бұрын
Do you have an image of the ford tool for setting the 29/64"? I might be able to mock something up as a 3d model for 3d printing of a tool
@davidmotola280713 күн бұрын
Great video, I just picked up a 65 Mustang 289 automatic, first, it stalled on hard stops. While I haven't gone in and checked the internals of they carb, typically Ford installed return dashpots, what are your thoughts. Mine also has the fuel line go directly into the cast body, not sure why it does not have a brass fitting, should I install one? Thanks
@steveconnolly71296 ай бұрын
I wonder if a 2150 2 stage acell pump for a 302 would work on a 2100 carb???hmmm
@geraldsahd3413 Жыл бұрын
I have rebuilt my 2100 on a 65 Mustang 289 2bbl. Your multiple videos and links to NPD was perfect. Many thanks. My one issue is that the Spring that moves the accelerator pump linkage forward is loose (see video at 3:20). Thus, the arm doesn't move and activate the accelerator pump. I called NPD and sent a video, they agree it is the spring, but no solution. Any Ideas?
@arborsamurai9 ай бұрын
Can you say more about the part with the copper bb ball? Thank you.
@reumpipes Жыл бұрын
What does the little BB in the choke housing do? Neither of the carbs I’m working with have it but the rebuild kit I got came with one
@kdog622 Жыл бұрын
Just rebuilt my 2100 with your help. Getting ready to dial it in on my 66 289 mustang. Where is the "best" port to measure vacuum for tuning?
@normfryer7060 Жыл бұрын
Why do none of your videos have closed captioning?
@itneverwasme Жыл бұрын
I'd love to see the choke setup. I've got a 351C with the 2100 and having choke issue with warm starts.
@AutoRestoMod Жыл бұрын
We'll look to that in the future
@hegonefishing9122 Жыл бұрын
I ordered out a holley 500cfm 2bbl and never looked back....
@kenwoody134 Жыл бұрын
What series carb goes on a 1975 I 4 4 cyl. Mustang II engine?
@josenevesneves7880 Жыл бұрын
Qual a altura de boia que deixou?
@joegarrett8166 Жыл бұрын
I just rebuilt that exact 2100. Said to be a 1963 version that came off a 1965 Fairlane. Running car and carburetor, but we rebuilt due to crude throughout. Mine did not have the plastic piece that inserted before the cone shaped spring seated. Curious to know is that an optional part? My kit did not include one and the little red diaphragm that does go into 1965 model 2100’s can’t be used on the one I have. Any assistance you can offer is appreciated.