How To 1965 1966 Mustang Fuel line install on finished car Episode 362 Autorestomod

Installing a 1965 1966 Mustang fuel line when the car is complete. We install a National Parts Depot Stainless Fuel line part number 9369-21AS on a ‘66 Mustang hardtop. We show how the clips work part number 2269-10CK. We also give general tips and tricks for putting the line in.
/ autorestomod
Thanks for watching!
Jeff Ford Contact:
[e-mail]
Parts:
www.npdlink.com
Fuel Line Tank To Pump Stainless 9369-21AS
Clip Set Brake And Fuel Line 2269-10CK

[@user-cf6ys7kh6g]

Another needed vid Jeff, I got my fuel line from inline tube . It came in 2 pieces lines ,not as long . But had to get another line to fill in, did want long hole that was on original 66 line .. Thanks man ,Mor Wil ,az ;)

[@AutoRestoMod]

You're welcome

[@seancash9188]

With every episode I find more and more things that need to be fixed on my 68. Not only is my fuel line run to the 6 cylinder hole it's mostly rubber as well, even running past the header.

[@AutoRestoMod]

Not good, that is a fire issue. '68 should be easier though.

[@kmccaff9626]

Oh brother. I should have done this when I did my brake lines. At least the exhaust isn't in yet. Great vid.

[@CorgiConnect]

Good timing on this video as I will be doing the same on my '68 in a few weeks with everything in the car and no lift. At least mine looks to be a 2 piece line since part of it runs through the torque box.

[@aps81sarge]

Shmutz under the car..... LMFAO.... Getting ready to do the exact thing to my 67 coupe. Thanks for the video.

[@wes85292]

omg,,, i have to replace the fuel line on my 66 ,,its full of rust,, right now im using rubber hose ,eek , im waiting on my new fuel line right now,, thanks for this video

[@AutoRestoMod]

You are welcome!

[@ThorMx626]

Please do a video on the brake lines next!

[@realmaindrianpace]

I've been involved in this fuelishness myself a few times.

[@P51]

dig your videos. for me, metal=brake line, rubber=brake hose.

[@aps81sarge]

Since I need to install brake and fuel, is it easier to do one or the other first?

[@Donny.C.wlWilliams]

What if you have a torque box do you have to cut the line?

[@DriveBreakFixRepeat70]

Can you just run some Earls vapor guard fuel line? Do you have have your go hardline?

[@jamesgiguere6620]

Here is a question: Does the height of the fuel line you run, in relation to the tank and fuel pump, mater? To save hassle I'd like to run my new lines over the inner fender to the mechanical fuel pump in my 73 Torino. This rout will bring them over the height of the fuel pump. and back down to it. Does that even matter? Please help.

[@bobbysantacruz6461]

Does it help if the fuel tank is out of the fuel tank is out of the car

[@kroekerkarl]

Would it be easier to start from under the car and snake the back 1/3 into place instead of trying to make the whole length through the small section by wheel?

[@AutoRestoMod]

Tried it. On that car there just wasn't any room.

[@kahvozeinsfang6953]

I put the transmission lines in my 62 with everything installed. It was very difficult till I separated the lines and put them in one at a time lol.

[@AutoRestoMod]

That can be a solution

[@fliguy41]

I cut mine in the center used a compression fitting saves the hassle Has never leaked

[@ktga67ish]

I’m getting parts together to do the Sniper Holey EFI install and I want to do 2 hard lines from front to rear. Don’t Luke the idea of using the flex hose they give you for the return line. Do you think I could just buy 2 of these NPD hard lines and run the next to each other? Or is there a better way I haven’t thought about yet?

[@bryanchiang1949]

What did you work out for a return line? I am about to put a sniper on my 66 too and just wondering what is the best way to go.

[@ktga67ish]

Bryan Chiang I still haven’t pulled the trigger on it. It would have been nice to get a response bc I’m still planning on going EFI.

[@bry94608]

Drew Seibert i’ll let you know if I do it first. I might just try to set it up without a rerun if that’s possible.

[@orlandoacevedo8221]

Would it be best to do your own line? This looked a little tough and was wondering if I got a spoll of stainless steel fuel line I did the bends myself? Does it have to be a certain length or as long as it connects to the engine from the tank and tucked in safely? Thanks in advance.

[@AutoRestoMod]

There are guys that've been their own lines as I said in the other post, that doesn't mean that you should do that.

[@orlandoacevedo8221]

@@AutoRestoMod great! I just wanted to be sure. Thank you for the Info. I also like watching your videos!

[@repromark]

houdini would be proud!!

[@AutoRestoMod]

We try! I'd never seen it done.

[@bobdfranks]

Would it be just as difficult to do the brake lines as well?

[@AutoRestoMod]

Not as. The smaller line will squirrel in pretty handily. Plus you aren't having to go all the way to the fuel tank.

[@bobdfranks]

Thanks, that's good to know.

[@howardwhite9773]

gotta ask - that fuel line must be a real joy to ship, was it folded??

[@howardwhite9773]

Hah! asked too soon! :D

[@bobbysantacruz6461]

Does it help if the fuel tank isn't in the car

[@AutoRestoMod]

Not really.

[@lilorbielilorbie2496]

when i got my 67 Mustang coupe . it did not come with a fuel line. i got one from someone, not NPD. they said it was pre-bent just like the factory. wrong . i don,t know what it was made for .but it was not a 67 Mustang. of course i had already thrown away my sales slip. so down to Oreilly,s buy a roll of metal fuel line and i ran it under the rocker panels. i did it like Jeff. jackstands, mufflers in the way and the driveshaft . now i just need to finish everything else. does anybody know how i can get more than 24 hrs. in a day.?

[@AutoRestoMod]

If you figure that out...let us know!

[@aps81sarge]

Sounds like my 67. Most of the parts came in a box. Fuel and brakes lines, nowhere to be found... Lots of time spent watching videos. Good luck

[@raaah]

First

[@PHCBILL]

Looks sorta like trying to tie your shoe with one hand.

[@AutoRestoMod]

Yes, and it is your left hand...and you are right handed...and hanging upside down.

[@gerry.mcginty]

hate the fact the CC are switched off on your video's...so annoying.

[@AutoRestoMod]

Until VERY recently, CC was terrible. We now have it turned on on our later videos.

[@Donny.C.wlWilliams]

5 minutes ìn and this job sucks

[@AutoRestoMod]

It is not fun. The line should not be a solid to the engine bay for V8 cars.