Avalon Rainier / Pendleton / Olympic Blower Replacement & Repair

[@tonyhuguley4998]

Thank you. Perfect video for my need.. I have the exact bower unit, that needs new blowers. I order the kit in your link and looking forward in getting mine back running the way it should. Thank you.

[@fireplaceblowers]

Thank you very much for the reply and don't hesitate to reach out with any questions during installation! Cheers, Jason

[@tonykeller2839]

I just wanted to give fireplaceblowers a shout-out as I recently ordered two replacement blower fans and rheostat from Jason and had a positive, moneysaving experience!! It was for a Lopi freedom stove and with the how to videos on here it was an easy job!! Give these guys a call👍👏☺️

[@fireplaceblowers]

Thanks again Tony, appreciate the feedback my friend!! Regards, Jason

[@jamesseffrin9052]

Thank you for your video and excellent customer service. I received my replacement blowers quickly and your easy-to-follow video enabled me to replace the units quickly and without a hitch. Will certainly recommend you to all of my friends!

[@fireplaceblowers]

Thank you very much for the kind words! Glad to hear everything worked out for you :)

[@MarkWSmith-lt9to]

How do you remove the blower assembly from the stove? I see the clips on the backside in the manual but this unit is not moving. Any suggestions on removing it?

[@fireplaceblowers]

The blower assembly is held in place with a couple of clips on each blower, which provide a friction fit of sorts. All you do is yank it off :) No screws or bolts to deal with, just pull it straight off. Hope that helps! Regards, Jason

[@RobertBasanez]

What the name of the tool you used at the 11 min mark? The one that bolts the blowers to the casing. 11:03

[@fireplaceblowers]

Sorry for the late reply. You might be referring to the rivet gun that we use to secure some of the pieces back onto the blower. We typically use sheet metal screws to re-attach blowers to the housing rather than rivets.

[@tomhough3649]

How did you run that blower without the thermostat?

[@fireplaceblowers]

You can bypass the thermostat sensor easily enough by disconnecting the two leads on the thermostat sensor and bridging those two loose wires together. if you haven't yet bypassed and still have questions, call us anytime at 262-989-4882. Regards, Jason