AVS Ventvisor Installation

Install Ventvisor Window Deflectors by AVS
goo.gl/FGdrTx
Keep fresh air flowing throughout your vehicle even in a downpour, reduce annoying wind noise, and keep your interior cooler in extreme heat with AVS Ventvisor Window Deflectors.
AVS Rain Guards at CARiD
www.carid.com/avs/

[@gregoryungs4462]

Thank you for this. Nice professional tip on cutting just the ends of the tape cover & placing BOTH the units on without committing the work which gives you a chance to make sure the placement is properly aligned to give it the factory look. --guy takes personal pride in the work too. I like that.

[@rockykisner9563]

Of all the instructional videos I've watched on this subject this is by far the best. Thank you very much

[@chrisbreezy-ryanbarbosa4320]

Brilliant method, usually i just go in and eyeball it. This is much more surgical and precise. Thanks for sharing

[@krisc1243]

Good guidance for beginners like me. Thanks

[@DavidGarcia-re9qh]

Some people install them over the black molding/edge. And you did yours on the outside door. Why,?

[@Bobcatspiritdude]

@@DavidGarcia-re9qh I think it depends on vehicle also

[@davidtaylor-garcia]

I always like to watch the video beforehand just in case. This video and the instructor were very informative. Very well done! Thank you!

[@lindasue8719]

Thank you for this video, really informative and easy to follow. 👍🏼 I had my car in for repairs yesterday and asked if they would be able to install these when I buy them. They insisted I could do it myself. I figured I probably could but I might get it all wonky. Your video really helps to see how workable it is! Thanks again!

[@BORIEGARD]

Quick and to the point. Well done! Thank you.

[@D3THD33LR]

Straight to the point. Solid tutorial!

[@MYNXXX804]

I love them I just applied them on my suburban the people at advance made it like it was something harder than what it actually is I did mine within 5 minutes thank you for your guidance to get it started

[@ScottMilnes1]

Great video with lots of solid tips! Doing my install tomorrow and so glad I found this vid. Great job!

[@CryptoGuru369]

So happy I found this video and watched prior to the installation. The rain guards I purchased do not fit correctly, so I am returning them. Had I just unboxed and installed, prior to assigning with the tape still on, the return process would have been a much stickier mess!

[@eddiestclair-im5wm]

Thanks for taking the time to demo the install! This was very helpful!!

[@kingalexander21]

You instructions were simple and clearly... I feel like PRO now... Greetings!!

[@ryans413]

When he pulled the backing off I was like very smart way of doing it

[@MYNXXX804]

🤣

[@x332433]

yea i just yank that joint 😂

[@doronikgjcs]

Excellent advice on getting this installed. Thanks for posting.

[@chosenone1004]

Excellent video ! Thank you Sir for your time recording this and sharing .

[@cgarcia592]

thanks.....I needed a refresher to install my Vents.

[@havevanmusttravel1441]

Excellent job sir! Good tip only exposing the adhesive tape on the ends.

[@davidsalter7536]

Just taking a moment, thanking you for the instructions, very simple and made easier. Good day

[@524Racing]

Thanks! Saved me a headache. Never would have thought to NOT remove the entire tape backing at once.

[@JoannWard]

What a great tutorial on how to do this. I’m very appreciative.

[@kenny.weathers]

Awesome. Exactly the information I needed.

[@lindasue8719]

I just installed mine! Thank you so much for this wonderful video!

[@Deetruckin]

Just got my wife a new ride. This was helpful. I’ll be putting hers on shortly.

[@bobbyc.1111]

What are they for?

[@eianflanagan7767]

This is a very informative and professional video.

[@antihero4103]

Just bought some for my 1500 and this video helped me 100% i have no experience with things like this and i would have botched this

[@TheTallMan50]

Are they still functional?

[@GangStalkingIsACrimeDotCom]

Thanks for the video. All this time I was trying to insert the window deflector inside the window sil but it would never fit inside. I came to the realization by watching this video that the ones I bought are meant to be put on the car outside.

[@barbaramorris9184]

I have wanted these for ages and always thought it was hard to put on. Never investigated. LOL TY I will be getting a set soon.

[@marknasia5293]

Thank you for making this video, it is always helpful to get advice from the more experienced, besides if i mess up my wife’s car, she will never forgive me for not watching a CARiD instructional video first… :)

[@DJPacoRamirez]

Thanks. This helped me a lot. And I used some good pointers for a video I just shoot. Coming soon.

[@ryudragon2008]

wow Your instructions is the best and easy to follow .I'll do this to my JeepW. THANKS YOU

[@SoulofAlice]

My vent visors have come lose on one end, I have 3M dollars side tape. But no alcohol...what else can I clean with? That won't be oily, as need to RE STICK end. Help?

[@YinzJags]

I almost paid to have the dealership do this. Thanks for the video. Saved me $350.

[@smokingonpacks9012]

Luke Encrapera that’s fucking ridiculous i hate the dealership

[@thurm101]

Thank you. Just installed on my Honda. They look great. Thanks for your tips.

[@transit770]

Seeing this video, am now gonna purchase my vent shades (rain guards) thank you so much.

[@raywilkinson3129]

Great video and a great website to buy parts from. Thanks Carid 🤘

[@mariozavaleta8068]

Very helpful man! Thank you.i always wanted this for years.thanks again.

[@melodeez6930]

Yay you made it easy to get it right do appreciate it doing mine Saturday 🤗 thank you 😊

[@Harpoonarooney]

Can you do one for the installs on in-channel AVS deflectors? Package instructions say to "buff" the inside channel w/included 3m Scotchbrite and to leave windows up for 72 hours to ensure fit and permanence. That product is definitely different than what was shown here. Cool video. Love the candor and tips. Very professional, too. Thank you!

[@martincolvill5453]

Watched this video. Read instructions. Perfectomundo! Thanks for putting this video together.

[@Bo-Dog]

Thanks this was solid advice, put em on my S10 today👍

[@Outofitallo]

Thanks! Your instructions were easy to follow.

[@bennygreene7429]

David Reimer can they keep rain from coming in at the very top of the door? no rain comes in at the window. just where the door shuts at the top

[@alfreedom3971]

Glad I checked out you video first. It was a big help. Thank you.

[@easymoneysha]

Just got mine! Thanks for this!

[@VinylToVideo]

Helpful, thanks. Mine had a little part that pushed in behind part of the window seal by the mirror that can be missed which will make for a poor fit.

[@Nick-lk2rv]

Tips from the pros are always great! Thank you for posting this :-)

[@Nick-lk2rv]

CARiD Good call... Subscribed!

[@Breathless8809]

Your video was super easy to understand for the external vent visors. Thank you! Unfortunately, I purchased the AVS in dwelling vent-visors and I’ve done everything you did, plus I followed the instructions to the letter, on the package! I even purchased over priced additional doubled sided 3M attachment tape! They will not stay in place! Can you suggest anything else I can try? The auto part store will not refund my purchase nor do they install them. Years ago they did! Otherwise this is $65 I’ve thrown in the trash!

[@maxittome]

Great tips ! Well done sir 👏

[@rickstrada804]

thanks did mines as quick as u with your video😎💪🏽💪🏽

[@pono321]

Mines?

[@songkim3939]

Very clear instruction! Thanks so much

[@TheYagogmagog]

Excellent tips, thank you.

[@rainclouds1188]

Thank you for this instructional video, very easy to follow but I do miss the transcript that you included with your removal video.

[@evanm9026]

Very impressive Like the clean skilled install.

[@joefrisco8025]

Thank you just got em for my truck

[@x9cito2011]

Very nicely done ✅ thank you!

[@AuctioneerElite]

Awesome instruction video!! Thank you!!

[@saysoun752]

Thank you. Made installation so much easier.

[@gretaknebel8495]

Very good demonstration on the install. Now I just have to get the old sticky tape off to put new ones on my suburban.

[@COMtnPilot]

Solid work! 😎

[@alynromero8729]

Quick to the damn point no bullshit thanks for this informative video!

[@richardcurb7870]

Thank you sir, very detailed instructions👍👍

[@juanjrmendiola8412]

Great video. Thank you so much

[@MrTPoops]

His tape method is brilliant

[@mirtasanders7985]

Hello Carid, how far from edge of car door do ventvisors apply? Thank you !

[@leonardvernon7176]

You're the best! Thank you

[@cameroonnewlook544]

Thank you so much big brother.

[@freedomdove]

Thank you very much. Well-done.

[@organicflatearthprepper7498]

good job . inspired to do it.

[@mannykhan7752]

Good video and explanation

[@louisbeatty8189]

very good video quick to the points

[@theshaw925]

Great video. Thanks

[@forreal1151]

Great tip about the tape🙂

[@LtDarkstar]

Great tips! Love the tape tip, going to use that when I replace my old visors. Is there a secret for getting the old cracked ones off? Can I use "Goop-off" or similar first then alcohol? or is there another way to make the surface clean again?

[@Harpoonarooney]

Just saw this post as I'm rubbish when it comes to following included instructions. To remove the old adhesive (and/or for those of us just joining this channel) DO NOT use anything like "goop-off, goof-off", or any petrol based removers! They will damage and irreparably dull your paint. Use a hair dryer and patience. Now, since that query was over 5 years past, we're sure the OP prevailed! 😅

[@WinModel88]

@@Harpoonarooney Goof Off doesn't damage paint or clear coat. I'm an auto detailer and I use it almost daily to remove tree sap, tar and line paint off of vehicles.

[@billb744]

Use ultra fine permant marker, it blends with visor and wipes off with alcohol.

[@giftbygodclothingcollectio8461]

Nice . First and best video ever seen. Simple and easy .hopefully it’ll be simple and easy when I try it on my car. And what is the main and only purpose of these guards ?

[@giftbygodclothingcollectio8461]

@@carid nice. Ok. Thanks a a lot for the information and that break down. I appreciate you

[@ppj228]

Great video

[@marcmedrano5306]

Nice video . thank you

[@jthunderstriker]

Well what if u put them on before watching this video and u realize one is crooked after you’re done? How would a feller that did something like that correctly adjust it? Pull completely off get new tape ? Get a new visor? Live with it?

[@majestic9104]

Well explained.. thanks

[@prone2panic]

Can I install this when its 42 degrees outside or should I wait until it warms up?

[@marcosvidal1293]

Nice guide the music keep me going

[@AlabamaRatties]

Excellent tutorial! I'll be using the method when I install today. Thanks!

[@aux1z11]

Would it be ok to install these in a hurricane or blizzard in a walmart parking lot at 12am

[@danielguzman8346]

I bought almost the same product . according to the product i gotta use a heat gun to heat the visor after you put it on your car? Is that a good idea?

[@tacoma5964]

are they support to fix = and shoping for 2016 got any in stock thank you

[@amnation4450]

Thanks nice and clear

[@thomasmichaels6850]

Thanks. Good tips.

[@bchuggs]

Thanks so much!

[@donnacpaskins6048]

Thank you!

[@a1axel738]

Music hyped me up to do it

[@NosiBalasi00]

Thank you Sir.

[@brianchesser576]

Thanks very helpful

[@mcderpen]

not trying to be silly but how secure are these stuck on ones? its not going to blow away while driving or the glue become loose on a super hot summer day?

[@medinaorlando1]

Ok does the halo supposed to be on when turning the main nite lights or when the day light ?

[@michaelmendillo7513]

Very cool Bro. !!!! TY! 😎✌✝💕

[@bobscorpion9722]

Good video

[@sherylpierson9662]

The video was great but I wanted it to be on the inside so they won’t fall off or something won’t happen to them I don’t know if I’ll keep these or not? Yeah I guess because I saw the weather take video first cause I didn’t know the difference I like that they go inside I might need to ask around to see peoples opinion on how they like their Rain deflectors

[@what1864]

nice tutorial ......

[@dbentham2323]

excellent and thanks ....!!

[@denisbelanger4473]

What is the ideal temperature to install this please .