AVS window deflectors for Tacoma DIY (IN-CHANNEL)

[@martinmarin9625]

Looks great, thanks for sharing!

[@thisishowwedoitdiy2477]

Thank you!

[@williamb834]

Helpful hint for the front windows, I cut out 4 squares from the carboard it came in and wedged them in the front and back corners of the front window to help apply a little more pressure and left them in for 2 days, the windows go up with no problems, the reason I did this is because I notice when I first put both front windows up👆 they were hitting on the visors in the front👉 and back👈 of the front windows, good luck and they look great 👍

[@thisishowwedoitdiy2477]

Good advise for all!

[@danielnavarro9094]

Hello where did you buy these form? Can you send link please? They look super good

[@thisishowwedoitdiy2477]

www.amazon.com/Auto-Ventshade-194768-Ventvisor-Deflector/dp/B01AIFTSEU/ref=mp_s_a_1_3?crid=108UTC4OSU9I7&keywords=avs%2Bwindow%2Bdeflectors%2Btacoma&qid=1707488599&sprefix=avs%2Bwindow%2Bdeflectors%2Btacoma%2B%2Caps%2C151&sr=8-3&th=1&psc=1 Click on that link, in there you will find the smoked version , the mat black , or the low profile one

[@wb4514]

Dry fit it first like you did and then just pull the tape all the way off and pop it back in. Then IMMEDIATELY power the window fully closed and leave them up for a few days if you can.

[@thisishowwedoitdiy2477]

Thanks for the feed back!

[@jos642]

I prefer the the ones on outside and no low profile on my 23 off road

[@thisishowwedoitdiy2477]

Nice those are nice to

[@RepublicanClooney]

What Tonneau cover do you have? tia

[@thisishowwedoitdiy2477]

What do you mean?

[@RepublicanClooney]

@@thisishowwedoitdiy2477 the bed cover

[@RepublicanClooney]

@@thisishowwedoitdiy2477 The bed cover in back

[@jimf.625]

Looks nice. How is it holding up? Also what are the recovery hooks did you install. 👍

[@thisishowwedoitdiy2477]

They are holding up great with no problems, I bought my recovery hooks from Amazon, no special brand just a good pair

[@jimf.625]

@@thisishowwedoitdiy2477 Thanks for the info and response. Much appreciated.

[@thisishowwedoitdiy2477]

@@jimf.625you got build going?

[@uno3863]

I smashed the shit out of my thumb yesterday installing the driver side 🤣🤣the window was making contact with the vent so as I was pulling I was rolling up the window and, SMASH! 🤣🤣, I got them installed tho and they look great 👍🏽... The shades, not my thumb

[@thisishowwedoitdiy2477]

Hahah crazy! Awesome man!

[@mohawg6635]

wax on wax off...oops! , sorry wrong video.

[@thisishowwedoitdiy2477]

Hahaha