Awesafe 9" Car Stereo 2009-2012 Ford F-150 Install

[@jdrhinehart]

As everyone else has mentioned, this is, by far, the best tutorial for installing these. Mine is a different brand, but the same wiring and setup. Thank you for taking the time to film, edit, and post this!

[@geoluz2314]

My friend, I congratulate you. I have seen several videos but none as detailed as yours. You really took the time to show every detail. Thank you very much.

[@matthewbutta9328]

I installed mine today watched maybe 12 videos this is by far the best video explaining what each cord is for and where it goes how to manipulate the trim without breaking it I wasn’t sure if I could do this myself honestly but I did and it was easy and saved myself so money in the end so thank you! Good video

[@stephenperkins4801]

I can't thank you enough for this. I did my install today and this was a flawless guide. This is a great, cost effective way to modernize an the 2009-2012 F150 (and some 2013s like mine).

[@Kimboslizzle]

Thank you so much for this video I was about to pay to have this installed and after watching this I did it myself. The only thing I need professionally done is the back up camera Thank you again

[@mikeo7427]

Hey, thanks for the video. Came across this radio on amazon, didn't think it would be very "plug and play". When i watched your video i was still skeptical, but you are right it is very plug and play. Only had to splice in 1 wire for my reverse cam. Ended up getting the upgraded model with the 4G lte sim card holder. Different UI but is probably the same in many ways. Really liked the idea of changing out the cigarette lighter, got mine with a volt readout for the battery. Couple things i would like to add: 1 - this is an android os so if you have access to google play store (was preinstalled on my unit) you can change out the UI Launcher to one that is available there. 2 - the USB on the SYNC insert can be plugged into the radio with a USB A Male to USB B mini Female, you can access this through the tray that is on top of the dash. 3 - bought a pack of "car metal retainer clips" on amazon for $6, much easier than trying to move the old ones over. Thanks again man, DIY all the way!

[@ivyg5887]

Did you have issues with the car link (CarPlay) notice there was a bit of lag Also having issues with the Power, Home, +Volume, -Volume touch screen buttons. I went to the setting to conduct as screen test and could not touch the red dots on the screen. Could this be a power/plug issue?

[@gregorydacosta2102]

First of all, this is a great tutorial for the installation. For those of you who may have experienced frustration because of no sound, I may have your solution. I noticed on the Amazon page that there is a wiring diagram. It details what to do in the event there is no sound. There is a wire labeled "Amp Control" (the one I have is brown) that is in the bundle of cables with the RCA female cables and the mic adapter cable. You have to strip the end of the wire and connect it to the "Amp Power/Amp Control" wire (mine is blue). You will find the "Amp Power/Amp Control" wire in the same bundle as the male RCA cables. Use electrical tape or shrink wrap sleeve to keep the wires together. This solved the no sound issue for me. I would first double-check your installation to make sure everything is put in the correct spot. Then check your fuses. Finally, I would connect the Amp wires, if all else fails. Good luck!

[@BLUECOLLARGARAGE]

Thanks for the extra info. I didn’t run into any issues with the sound.

[@gregorydacosta2102]

@BLUECOLLARGARAGE No problem, sir. A few of the commenters did, so I thought I would offer a solution to try out. Thanks again for your video!

[@shawnwaldrop3702]

Tried it. Still no sound. But hopefully will get me on the right track

[@MatthewBrooksher]

Where can I find this diagram?! I’ve been messing with mine for two days trying to get sound!

[@MatthewBrooksher]

@@shawnwaldrop3702did you ever figure out why no sound? I’m pulling my hair out!

[@jennyh7197]

best video of all for installation of this product. nice job! I've watched 10+ others. Thank you for explaining what cords you don't use.

[@damoncash4375]

This works on 2013's with same setup as well. Just did the install today

[@ernie0699]

Thank you for posting, it was really helpful to us with my friends 2010 work truck f150. He had problems with stock stereo not playing very well (extremely low volume) and the new jvc single din radio fixed the issue!

[@jacksonheringer1278]

how do you control you speedometer where it showed your gas mileage

[@ernie0699]

I don’t remember any of that, I did the job a few months ago, it was a customer vehicle… sorry

[@augmanify3807]

I think this is the best video so far

[@VicMprado]

So far the best video thanks!!!

[@veraluvsart1]

Thank you so much for showing all the wiring. Got it done! Thanks again!

[@MrDUNCANJA]

I’m having issues with mine not turning off when I take the key out. Can someone assist with this?

[@gettingfitat5015]

​@@MrDUNCANJA same here!! He mentioned a spot on the back of the unit where the canbus should be plugged in, but never showed that step. I THINK I missed that! I didn't know if that had anything to do with our issue of it not turning off or not...? Gonna go take a look later today...

[@kelly-k3h]

@@gettingfitat5015 Do you have any udpate? can it work?

[@scottdietz7963]

@gettingfitat5015 did that solve the issue? My unit won't turn off either.

[@gettingfitat5015]

@@scottdietz7963 no. Apparently there's a red wire off the canbus that needs to be spiced into some other factory wire. It's painful trying to get any kind of support from these guys. I put my old stereo back in. Returning this one.

[@busiadeyemi7742]

How do you install the back camera for an existing F-150 as your video did not show that?

[@codyr.h.5473]

You didn’t show if it actually worked with steering wheel controls. I know it advertises it on the box but what do you hook up to the new head unit to make that work? Great video btw

[@hatran-kv1fq]

Thanks!

[@hatran-kv1fq]

Hi, thanks for video. I bought the same one, I installed but there is no sound. Do we need to plug the red and white cable? I tried but nothing happened.

[@hisstealthiness1111]

Excellent video Thank you. I had a different brand that I installed but the steps were the same. Naifay is what I got from Amazon. They provided a harness part that said FORD. Initially, I used this and tried it before slapping it back together in the dash. It did not work. This must be for Platinums or something with the digital heat/Ac. My 2011 fx4 is loaded but due to the Japanese tsunami at the time, I could not get navigation. I did not need to use the clips taken from the OEM on the new unit. When I dummied up a couple before doing the wiring , it seemed like it would be an issue through the rest of the swap with them falling off. Bottom line is, those were not necessary for mine. It is all back together and I did not even put the bottom fastener in near the USB input. The unit is plenty tight. No vibration whatsoever. I hope someone reads this and is able to save time. Thanks again for the video.

[@antoniohicks5407]

Thanks! Awesome vid!!!!

[@KevinHeckendorn]

Great help! Not very handy and only took me just over an hour to do

[@TheRCNetwork]

I'm going to give this a go on my 2011 FX4. One question, about a year ago, my stock radio quit working. It started with certain speakers not working and finally it won't even turn on. I read that it's common for these units - something internally in the CD player section comes unsoldered. I'm hoping that this system will allow my newer Alpine speakers to work again. From my 1990's car stereo days, I wonder if there's anytime of amplifier on this new unit? What's your thoughts?

[@BLUECOLLARGARAGE]

This unit made the stock speakers in this truck sound so much better than the stock radio did. So I’m sure it will make you alpine speakers work again and sound much better.

[@TheRCNetwork]

@@BLUECOLLARGARAGE big thanks for the video. I installed it on Saturday and got all of the speakers finally working on Sunday. My only hiccup was getting that passenger side panel (air vent, 12v plug) clipped into the new radio panel in the center. It just won’t align and seat in

[@TanvirSingh-b9t]

Hello sir, i have got a 2011 ford f150 and have the same stereo unit as this one installed by myself, everything works fine but the sound does not work at all and i had the same problem as you've got the speakers and the radio were not working before the installation as well so what could be the case ? If you have any idea ? I would really appreciate that ?

[@jamesharper8373]

I noticed that the upper middle portion of the bezel looks like it kinda droops down. Is there a purpose for the downward droop? If you look at the radio straight on, you will notice

[@MatthewBrooksher]

This video is great. It confirmed I installed my son’s unit correctly. Can anyone come up with any reason why I’m getting NO sound? I’ve tried two units…. Same result on both. Everything is correct. Once I plug his factory unit back in I get sound………. 2010 Ford F150

[@andrewseth6184]

How do you know what temp your vehicle is ? When i go to the controls for heat and air on screen it shows nothing and i cannot operate them

[@rsthukaram]

where can you see temperature controls on here, or outside temperature? I have it installed but no idea what my temp is set at by turning the knob.

[@scottdietz7963]

I'd also like to know, mine doesn't display them either

[@BLUECOLLARGARAGE]

This won’t display the temp anymore you just have to use like old school cars.

[@michaelkramer2686]

@@BLUECOLLARGARAGE I wonder if there is a canbus setting in the the thing that allows you to display the temp. Or mabye if you use a obd2 app to show it. Not sure if this is something you tried to explore.

[@rsthukaram]

I ended up taking that display unit and re-routing the wire into my dash, and that's where it lives for now until I 3D print a housing that can be mounted somewhere out of way but visible.

[@gpc8337]

Oh so you mean the it still displays the desired temps and outside too? I thought it would not be powered up back there. But that’s a good option you said about repositioning that display somewhere. Hmmmm let me know what you come up with thank you so much .

[@outsgoodadventure5111]

Great video. I'm planning on buying this unit now also. Do you know if I can use my existing backup camera wires but run them to this unit instead of using the small one in my mirror?

[@hunterjohnson9891]

how do i connect the backup camera, my truck alreadfy has one but mine also came with one so i dont know what one to use or what cable it is behind the stereo to connect it.

[@Officiallouie2k]

I have a f150 platinum and my stereo has settings to change the LED that come in the truck, is that feature still going to be there?

[@jacksonheringer1278]

i have a 2010 i installed mine and i can't figure out how to change threw my speedometer because it took the buttons away

[@sammyperez1055]

No me funcionan los botones de los manubrios para subir y bajar volumen. Hay algo que deba hacer ?

[@dreamingkid6573]

Did the install on a 2010 ford f150. Mine doesnt shut off when the ignition is off.

[@austineddy498]

Same problem

[@MrDUNCANJA]

@@austineddy498I’m having the same issue

[@gettingfitat5015]

Same!

[@Jport90]

I know its been a bit but the issue is the accessory cable (red) on the display is always hot. It can be fixed by placing onto an accessory wire but I am still working on that portion.

[@scottdietz7963]

@@Jport90 please let us know how it goes and what you did if it works!

[@MaritzaAlcantara-q5r]

Where can I buy it and how much

[@RylanSavell]

I got one of there’s not the same brand but looks the exact same but I never booted up do you possibly know what the problem might be

[@BLUECOLLARGARAGE]

I would double check all you connectors and make sure the unit is getting power. Unless you received a faulty unit.

[@sabrinap2007]

I notice that it says Android will it only work well an Android phone outside of the radio portion of it.

[@BLUECOLLARGARAGE]

No I have a iPhone and it works perfectly fine no issues with CarPlay or anything.

[@sabrinap2007]

@ Thank You

[@garrettbemis8770]

I installed my head unit today! I was so excited but now I can’t get any sound at all! I have triple checked all wires but I still can’t get sound. Any ideas?

[@EastTxDoer]

Did you or anyone have problems with it not shutting off? If so how did you fix.

[@BLUECOLLARGARAGE]

The unit I installed never had this issue but I think there were a couple other people that had this issue so hopefully they chime in.

[@tanroberts]

I believe the link to the radio kit needs to be updated. It goes to one that does have the wiring harness or the correct adapter plate. If possible, please confirm and/or update. Thank you!

[@cstober26]

The screen won’t turn off when the ignition is turned off. How do I fix it?

[@On_the_bumper]

You ever figure it out I’m trying to do the same thing. I just installed it today and it doesn’t turn off.

[@cstober26]

@ I emailed the company who makes it and I have to install this file on the screen. I lyk if it works tmrw

[@On_the_bumper]

@@cstober26 thanks

[@On_the_bumper]

@@cstober26 did it work?

[@mr.blitzsendem]

check the power make sure whatever its connected to is only getting 12v when the car is on you got it on one where it’s a constant 12v

[@gettingfitat5015]

Mine gets here tomorrow! Can't wait!! How's the unit holding up?

[@BLUECOLLARGARAGE]

So far so good no issues at all. Can’t beat the price and functionality. I’d say it’s just as good if not better than major brands like kenwood, alpine, and jvc that go for $700-$1500

[@gettingfitat5015]

​@@BLUECOLLARGARAGE sooo, if I didn't plug the canbus in like you had stated (but never showed that), could that be the reason my unit doesn't shut off when I remove the key? 🤷

[@BLUECOLLARGARAGE]

@@gettingfitat5015yes most likely that would be your issue.

[@cstober26]

@@gettingfitat5015when does he mention the cambus?

[@cstober26]

Canbus**

[@patrickmullaney2816]

hey man. i just got done wiring everything in and the video was great. only issues im having is when i start that car, i have to manually turn it on, and when i turn the car off, i have to manually turn it off. how do i make it so it automatically turns on and off?

[@djjasong4986]

Same

[@JorgeLopez-dg4fj]

How is the sound quality on these units?

[@BLUECOLLARGARAGE]

Actually really good. It brought the stock speakers to life in my opinion.

[@catchingthecasp]

Will this work on 2013? I have the same dash and radio set up.

[@eagleguy007]

Does your steering wheel control still work?

[@901perez5]

Do the steering wheel controls for the radio work with it ?

[@On_the_bumper]

@@901perez5 yes very easy to install

[@sb11michael]

How do I connect the volume steering wheel button

[@frosario26]

Will this work on 2013? I have the same dash and radio??

[@BLUECOLLARGARAGE]

Yes it will work for the 2013.

[@SlimImpossible]

@@BLUECOLLARGARAGEwhere did you get the custom baseplate that the new radio fits in?

[@MarvinPavon-m7u]

Donde encuentro ese radios

[@BLUECOLLARGARAGE]

amzn.to/3C7iOcU

[@shawnwaldrop3702]

2012 FX4 with the Sony sound/subwoofer. I’ve been wrestling with this for hours. Still no sound. Any suggestions?

[@grantgreenfield84]

I have a 2012 FX4 as well, no Sony sound or sub, but I also have no sound. Had it working the first day when I was installing it, this morning went out to start the truck, went inside, came back out and the radio was on with sound. Got in the truck and the sound turned off when it picked up my phone.

[@grantgreenfield84]

Update…..this morning started my truck went inside, came back out, opened driver side back door to put my backpack in and the radio came on, lol. I had my back doors open when I was installing, that’s why it worked then, looks like it needs power for sound to come on.

[@MatthewBrooksher]

@@grantgreenfield84can you explain in more detail? I just installed this unit and I’m getting no sound at all.

[@grantgreenfield84]

@@MatthewBrooksher I had a short in the wire harness in my rear driver side door, when open i had sound, when closed no sound. Replaced the wire harness and now no issue

[@MatthewBrooksher]

@@grantgreenfield84 The reason I ask is I just installed this unit and I am getting no sound. The factory radio works just fine and has sound. This is on my son’s truck and ever since we purchased this truck it has always had the message “left rear door ajar” and “right rear door ajar”….. Could this have anything to do with us getting no sound out of this new head unit? I wouldn’t imagine so since the factory unit works fine but I ran into your comment and it made me wonder. Thanks for your response and input.

[@veraluvsart1]

Do you have the link to the cigarette lighter converter adapter?

[@BLUECOLLARGARAGE]

amzn.to/47uewr0

[@dougbrown7670]

Has anyone installed one of these all in one units that show the HVAC settings IE heating and cooling temperatures?

[@bcw686]

What about the 2014 F150?

[@veraluvsart1]

What is the link for this unit?

[@franciscoabreu1839]

My is 2009 with aftermarket camara how to activate it turn on

[@ReedCreppel]

When I click on the link it brings me to Amazon but then says that they can’t find that page anyone else have that problem ?

[@BLUECOLLARGARAGE]

They must have updated the link so here’s another one amzn.to/3ZxsAfU

[@felixrivera6592]

Hello, I recently installed a similar Android radio. My radio came with an unbranded can bus and I’m having a hard time setting up the steering wheel controller. Were you able to set that up?

[@ronaldosalmeron2625]

Were you able to set up the controls for the steering wheel? And back up camera ?

[@christiansantos7146]

3weeks later were you able to set it up ??

[@dakotaoneill5941]

got mine all plugged in and it just doesnt turn on

[@blakemoore3516]

I’m not sure where to hook my subs up though

[@curtcrowdis9604]

Radio is awesome but i cant connect bluetooth w/ phone

[@nickkak9685]

I've got no sound. Anyone have the same problem?

[@shawnwaldrop3702]

Right here. Different brand but basically the same layout. I’ve got the Sony sound system with subwoofer and cannot get any sound from the speakers now.

[@quantumkangaroo9825]

@@shawnwaldrop3702same here. But I have sound in the front. There’s 2 wires you need to splice together. But cannot figure out how to get sound to the back

[@MatthewBrooksher]

Did you ever figure this out?

[@nickkak9685]

I sent it back

[@MatthewBrooksher]

@ figured out the issue. Any ground issues cause these units to go into protection mode. In my case the rear left door had a blown speaker causing it.

[@Grizz6601]

Only problem i have is no satellite radio capability

[@mikereiche]

I installed one of these in my 2012 F150. It didn't power on. There was 13v on the power pin and 3.2v at the onboard fuse. I installed a second one - same thing, does not power on.

[@andrewalther2497]

same thing, did you find a fix?

[@cstober26]

DO NOT INSTALL THIS. I installed mine just about 5 days ago and I’m getting all kinds of internal electrical problems. Fault in internal control module, low system voltage, lost communication with (PCM), battery voltage out of range. I’ve already bought a new battery and that wasn’t the issue. This thing is a piece of junk.

[@cstober26]

My truck won’t even start now🤬

[@BLUECOLLARGARAGE]

Sounds like it could be an issue with your alternator. Have you had it tested or do you know what your charging voltage is?

[@cstober26]

@@BLUECOLLARGARAGE yeah your right. It was the alternator😭