Awesome Anti-Air Loss Extension

[@Movelectrics]

⚪️ WATCH NEXT 🛴 Xiaomi videos you must watch bit.ly/35hyUfm 🛴 Xiaomi M365 Pro upgrade videos bit.ly/37mWNoI 🛴 Xiaomi maintenance videos bit.ly/31nxsH9 ⚪️ Product links in description if you want to upgrade your scoot!

[@enam9000]

I have this too, saved me so much time! Also the Xiaomi pressure pump is the best tech I've ever had! Everyone should own one! 😤

[@Movelectrics]

Yes the pump is amazing!

[@luke8K]

Ordered dude your videos helped purchased a few items you reviewed they come in handy thanks again

[@Movelectrics]

No worries Luke and thanks for the support 🤛🏻

[@hasansakib3969]

Thank u so much i am hasan who requested on your page for this video thnx alot

[@Movelectrics]

No probs man!! Scoot safe 🛴

[@virtualdave]

I bought this a few months back and just used it, thought it was rubbish at first as was saying my tyres were registering at over 100 psi and they were still flat 😂, when I checked your video I noticed it doesn’t have a black rubber ring inside it, I removed the ring and it works perfectly now, must be for some kind of protection which I had no knowledge about.

[@Movelectrics]

Great Dave! It’s definitely a must have 🛴

[@mybestscooter1879]

Great video! No more hassle! :D

[@hugojcaires]

This is exactly what I was looking for, just one question: doesn't this mess up with the pump's pressure reading? Will the pump stop by itself (reliably) once it reaches the pressure I set to or should I stop it manually?

[@Movelectrics]

You can stop it or let automatically stop at your desired pressure. I’ve being using it for a very long time and honestly, would have to be one of the best things I ever bought.

[@hugojcaires]

@@Movelectrics nice thanks

[@aminekoko]

i used the nozzle on my rear tire it worked without problems, but in my front tire it didn't fit, i don't know why ?

[@Movelectrics]

Hmm, did you give it a good squeeze? It could be the valve possibly ⚡️

[@MuckSake]

Hello mate, Recently bought this scooter, The tyres say 50 psi on them, how is it ok to go higher than this? Great vides by the way, all have helped me alot.

[@Movelectrics]

I always had about 45psi. Lower pressure is risky. More punctures. Thank you for the support 👊🏼

[@kevinstevenson6897]

Where’s the link to buy that anti air little adaptor thanks

[@kevinstevenson6897]

Cheers I found the link and it was on discount so I ordered it cheers buddy 👍

[@Movelectrics]

Great! I got mine from here bit.ly/2UNHa1M

[@kevinstevenson6897]

Yeah same place where I ordered it from pal nice one 👍

[@quantoon7699]

I bought the Xiaomi air pump and i noticed, that it doesn't need any extension for keep the air in the wheel. I haven't any air loss rear or front tyres. There isn't any air escaping sound...

[@Movelectrics]

The extension is very handy to get almost the exact pressure you want. Some scooters have tight spaces where the valves are, so it’s difficult to unscrew fast. That’s where this extension can be helpful ⚡️

[@lvago]

I learned how to not lose air removing the xiaomi air pump: you need to push the thread of the pump against the tire while unscrewing.

[@Movelectrics]

Thanks Leonardo for sharing this tip!

[@madmax3691]

Can you recommend a good app to hack my m365 ? Thank you!

[@Movelectrics]

Razvan Andrei join the FB. Everyone is very helpful, scoot safe 🛴 tiny.cc/eiktqz

[@fireflyfree311]

Brilliant yes, but for an electric pump useless because the electric pump cant read the pressure to pump up to the correct pressure. uggggh!!! What do you do when the pressure is not quite there and starts leaking out of the pump. And you have to remove it everytime to check the tire pressure with a gauge.

[@Movelectrics]

I’ve used this for over 2 years and found it very accurate. Never had an issue. After pumping using this, you can easily pop on your pump to verify the psi.

[@shd_samurai9676]

It does boggle the mind that the extender you get with the scooter hasn't got the air loss valve built into it.

[@Movelectrics]

That would of being a plus!

[@numinumful3815]

on ae its called "tire cap adapter". if youll look for "anti air loss extender" youll get nowhere

[@Movelectrics]

They were called years ago when they came out ‘anti-air loss extension’ Some places call them ‘valve extender adapter’ All are listed on my site ⚡️ movelectrics.com/pev-tools-upgrades/

[@numinumful3815]

btw on my g2 pro i lose at least 25% of tire pressure within a week. i already replaced tubes on both wheels (no change in results) and theres nothing more i can do. im 95 kg at the moment. i bought the anti air loss extender plus electric pump but it will not resolve the issue

[@Movelectrics]

@@numinumful3815 I rode around 170km a week on my scooters in the past and would have to keep the pressure maintained 2-3 times a week. Just keep them topped up. Remember the cold, weight can impact pressure big time.

[@numinumful3815]

@@Movelectrics thanks :) its weird as someone with inokim ox2 who rides a lot told me that he doesnt inflate tires for months

[@numinumful3815]

i got the anti air loss device, two of them actually from ae and tried it. i have no other word to describe the product i got but pure garbage. maybe a good unit from another place will work but the product i got is garbage

[@Movelectrics]

I have mine 4 years (just bought one) and it has never let me down. What is happening with yours? Main purpose is they don’t let air out when unscrewing it from the valve. Amazon have them 👉🏻 movelectrics.com/pev-tools-upgrades/

[@numinumful3815]

@@Movelectrics with the pieces i got it simply doesnt work. i saw your demonstration and did the same but with the pieces i got it wont measure the psi at all, air keeps flowing out and its not inflating

[@Movelectrics]

@@numinumful3815 what pump are you using?

[@numinumful3815]

@@Movelectrics czk-3668