AWESOME RC HELICOPTER for BEGINNERS & EXPERTS ! Eachine E160 Brushless 3D6G Flybarless RC Helicopter

[@LeeRaven-rb4dp]

A beautiful clear sky it is

[@EssentialRC]

Yes. That is rare but we made the most of it. 😎

[@SensaMilla]

Cheers Jason

[@EssentialRC]

AVAILABLE HERE: bit.ly/eachineE160helicopter Use code BGE160RTF to get 15% OFF RTF Version Use code BGBNF160 to get 15% OFF BNF version

[@ralphpetronella7208]

How much are they

[@nicholascartlidge]

Jason great demonstration. You are proof that a heli flyer shouldn't test for beginners. I have a E160 and it's extremely twitchy even in 6g. But it can be made to fly scale/ smoothly and suitable for beginners by lowering the head speed, Cyclic and tail response, remember the fixed pitch you learnt on.. Try a fixed wing flyer nube on it, look at the fear in his eyes. Not picking love the channel and am subscribed.

[@heeder777]

Nicholas Cartlidge I find that a higher head speed by lowering the pitch curve worked better to smooth out the helicopter and tame it down a bit. I got to learn how to adjust old school again since all my other ships are larger and run governors😀

[@nicholascartlidge]

@@heeder777 Well, I'm nothing if not willing to learn, I'll try your way for a session or two. My thanks for your reply.

[@adrianduckenfield]

I'm amazed how well the tail holds on full up collective.

[@EssentialRC]

Probably the most stable beginner heli Jason's flown. That's why he's giving it back to me so I can have a go. He's got an OMP M2 to try next.

[@KalibasauRC_64]

Amazing flight

[@EssentialRC]

Thanks a lot!

[@heeder777]

I like mine. I’m using a 14sg. In regards to switching back from 3D to 6G, it won’t unless you go to zero throttle and spool down. It switches from 6G to 3D no problem. The main shaft bearings are not very good and load up with debris fairly fast. I replaced them with a higher quality sealed bearing so I don’t have to clean them out every 12 flights. If they are dirty the rpm fluctuates and the Heli gets all jittery in yaw and collective is very hard to hover at a set altitude. . For the price it’s not bad and it really is fun to fly.

[@leepalmer2097]

without talking my head off could u suggest a good comprehensive toolkit to use on these please

[@leepalmer2097]

where did u get them do u have a link please?

[@heeder777]

I do. I’m not in a place to easily send the info. I’ll reply back later.

[@heeder777]

@@leepalmer2097 I posted a comment with some info on your KZbin video of you flying.

[@alexbrasa1]

Thanks guys great content, don't miss any video 😁

[@EssentialRC]

Thanks for watching AF!

[@kelvinbloomfield1375]

nice did you do another flight with this heli as in tic tocs and inverted flight. i didnt see one. maybe i missed it ?

[@rafaelsonodabatista9520]

Eu adoro este tipo de vídeo no canal De Rc

[@scottthompson2481]

Like it , good value ............

[@yottiguerra9189]

Hello nice video....what is the button position for un stable flight because Im beginner ....I have the same helicopter...thanks

[@hb7866]

Where is that the grass is amazing

[@beezotownaviation1167]

Coool great video mate

[@EssentialRC]

Thanks 👍

[@rafaelsonodabatista9520]

Good eu Gostei recomendável

[@custardthepipecat6584]

That's a slick helicopter 🚁 !

[@EssentialRC]

Jason thinks so. I can't say. He won't let me fly it 🙄

[@custardthepipecat6584]

@@EssentialRC That is just mean.😸

[@randall8686]

Essential RC i would like to fly it a few times before sending it to the Essential RC graveyard 😉

[@leepalmer2097]

till u get one yeah bad experience

[@JackSmies]

Great video. Can you tell me what throttle curve you have on 6g mode as out of the box it was a constant 80% for me and in 3d 100%.

[@blakjack3053]

Hey that's a neat little heelo! I really need to get me one of those things!

[@leepalmer2097]

Dont

[@raihanmiah7162]

@@leepalmer2097 y

[@MrKeldar00]

What is the approximate run time with the included battery?

[@EssentialRC]

Depends on the head speed obviously but 6 minutes +

[@bboyhafan]

3D to 6G with a RTF radio - --that information i woul like to know to, i am begginer pilot too, so it will be cool if its possible to switch from 3D to 6G with a RTF radio in set. I just read and see in videos that is possible only with bind with Futaba radio. Mybe someone know ho to do it with RTF radio what it was in set with heli...

[@boeing747400ifly]

Great video. I want to order this model for the E6 transmitter as much as the heli itself. I am hoping to bind my XK A430 (with S-FHSS protocol) to the E6 transmitter. The tx bundled with the A430 plane is pretty toy grade.

[@leepalmer2097]

i have one and its a disaster first attempt at flying and I crashed it so now its taken a month to order the parts now I cannot find a good toolkit for this great cant fix it

[@petenguyen8455]

"3D6G modes to change stabilisation at the flick of a switch" can you confirm if you can switch between modes during flight not LANDED then SWITCH?

[@fyresg]

Yes, you can switch modes during flight. I did that in my review video. ⚠️Edit: I was able to switch from 6G to 3D, I did not try the other way.

[@andreaderosa2532]

@@fyresg Hi, I was able to do the switch you made 6G to 3D while flying but was NOT able to revert it to 6G mode without landing (it was quite scary beeing not expert). Did I miss something? Did you try and succeed (is not in this video). Great job anyway, Thank You

[@fyresg]

@@andreaderosa2532, oh no, I did not switch from 3D to 6G! I only tried 6G to 3D, which works. I'll try the other way then let you know. Thanks for watching and your encouragement! 👍

[@bboyhafan]

​@@fyresg that information i woul like to know to, i am begginer pilot too, so it will be cool if its possible to switch from 3D to 6G with a RTF radio in set. I just read and see in videos that is possible only with bind with Futaba radio. Mybe someone know ho to do it with RTF radio what it was in set with heli...

[@fyresg]

@@bboyhafanit was a limitation put in by the manufacturer. I believe they removed it in the later versions.

[@brettmccafferty7510]

This thing is awesome especially for the 💰. I just started flying with a blade nano s2. It is super hard to fly in 3d. I've heard it's easier to fly larger models so I bought a wltoys v950 fur short money. I can't wait to be good enough to buy one of these.

[@M0rdH0rst]

It looks nice, but I wonder how long you will get spare parts for it. And the tail rotor sounds like the lamenting mother in law in the back seat 😆

[@EssentialRC]

What an analogy ! Not like my mother in law. She's amazin.

[@leepalmer2097]

ok they are not at all crash proof do not buy one an absolute nightmare it will end up broke one setting wrong it will plummet to the ground (From only 6ft high in my case) and bits fly off everywhere then u have the issue of waiting a month for parts they come then you realize they don't give you sufficient tools to replace anything at all then now you have spent loads of cash and you have no support at all NIGHTMARE FROM HELL....

[@EssentialRC]

There must have been a deep breath in there somewhere 😆...there sure as hell weren't any full stops

[@stevejohnston8543]

Lee Palmer is right. Junk as far as durability. Man gear is a joke (keep a bag of them). No way is this easy to fly. It’s twitchy as hell and way too powerful for a beginner. Crash proof!?....that was funny. Stay away from this thing unless your’e very advanced or you’ve got nothing better to do than fix it and wait for parts. Friendly advice. Need to rethink your notion of beginner helis chaps. Cheers.

[@leepalmer2097]

@@stevejohnston8543 Exactly finally someone speaks the truth mines for sale brand new needs a rotor blade that's it I haven't got the time for it

[@joementalewicz7650]

buyer beware stay away from this one

[@asafgl4281]

Rear motor sounds like a mosquito...

[@randall8686]

Always going to be the way with direct drive as the motor needs to spin up and down extremely fast and it needs a small prop to do this.

[@Jack_The_Operator]

e