Axial Capra Upgrade Series - Vader Skid and Hobbywing Fusion

After taking the Capra out to Proline by the Fire 2022, I definitely started to see some limitations to the low hanging belly. I was driving around with some 4WS Capras, and that is also something definitely in store for the future on this rig. In this video, I replace the stock skid with the Vader skid as well as replace my Hobbywing Axe 2300kv with the older version Hobbywing Quicrun Fusion 1800kv. A little down on power, but that's alright.
Seen in Video:
Vader Products Skid for Capra - bit.ly/3XsivPz (Amain) | ebay.us/7k3XeU (eBay)
Hobbywing Quicrun Fusion 1800kv - bit.ly/3V55n1j (Amain) | bit.ly/3VaaugD (Tower Hobbies) | ebay.us/n31c9R (eBay)
Kit:
Axial Capra 1.9 Buggy Kit - ebay.to/3rYdEF7 | bit.ly/306GRlg (Amain)
Parts:
Axial Aluminum 25T Servo Horn - bit.ly/2PtJLfq | (Amain)
Pro-Line 1.9 BFG Krawlers G8 Compound - bit.ly/35VxKFK (Amain) | ebay.to/3pe9qrt
Pro-Line Dual Stage Foam - bit.ly/2PLZsPk (Amain) | ebay.to/3jIoCM6
1.9 Beadlock Wheels - ebay.to/3pgUoRN
Supershafty Servo Mount - bit.ly/2swdDiL
Supershafty Rear Upper link riser - bit.ly/39kZHsp
Brass Portal Covers - ebay.to/3s4RXn7
Team Garage Hack Overdrive Portal Gears - bit.ly/2V28Npw
Robinson Racing Hardened 11T Pinion - ebay.to/3aqintB | bit.ly/32bRpSz (Amain)
Vader Products Skid for Capra - bit.ly/3XsivPz (Amain) | ebay.us/7k3XeU (eBay)
Electronics:
Armory RC Katana 500oz Servo - www.armoryrchobbies.com/produ...
Spektrum SX107 Servo (ebay) - ebay.to/375gJeR | bit.ly/3iWctCr (Amain)
Turnigy GT5 Radio - ebay.to/2Z7FSRx
Turnigy FS-BS6 Receiver - ebay.to/3tS1C1O
HobbyStar 3700mAh 3S - ebay.to/2Nob1xl
Hobbywing Quicrun Fusion 1800kv - bit.ly/3V55n1j (Amain) | bit.ly/3VaaugD (Tower Hobbies) | ebay.us/n31c9R (eBay)
Tools:
Versachem Brake Caliper Grease - ebay.to/3p8bIZ7
Noleen SF3 Grease (available on eBay) - ebay.to/3jN9vB9
Permatex Anti Seize Lubricant (ebay) - ebay.to/3qpTbsN
Associated 1656 FT 1/4 in Driver Handle - ebay.to/3d31t5O | bit.ly/3gJVi56 (Amain)
Tamiya Side Cutter - ebay.to/371SAWb | bit.ly/3gHggSm (Amain)
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit - ebay.to/3tQqXcr
MIP Metric Speed Tip Set MIP9512 - ebay.to/3qdBMTU | bit.ly/2Ch0wGB (Amain)
Bob Smith Industries Blue Thread Locker - ebay.to/3jDR8i9 | bit.ly/3283GHR (Amain)
ProTek RC Shock Pliers (available on eBay) - ebay.to/372Lscs | bit.ly/3iPs1Ie (Amain)
Duratrax Shock stand - ebay.to/2MOyJ6l | bit.ly/2W9Ihdq (Amain)
Hakko FX-888D Soldering Station - ebay.to/3aXFmLj
Multistar Rubber R/C Work mat - bit.ly/2T3F4Zo
IWISS Crimping Tool - ebay.to/3jGKZll
Universal Servo Cable Wire Connector Crimp Pin Kit - ebay.to/3tSAAaW
E6000 Adhesive - ebay.to/2MZwtZV
Paint:
Tamiya PS-58 Pearl Clear - bit.ly/35upCLX
PS-19 Camel Yellow - bit.ly/2PsLtOv
PS-5 Black - bit.ly/2PueQzY
All links are mostly to ebay.
#Axial #AxialRacing #AxialCapra #RockBuggy #RCTrucks #RockCrawler #RCCrawler
=================================================
Subscribe: kzbin.info...
*Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, RevolutionX may receive a small commission. This helps support the website and social media channels and allows RevolutionX to continue to produce content. Thank you for the support!
=================================================

[@islandrc-duke1972]

Awesome RC and cool upgrades

[@RevolutionX]

Thanks 👍

[@NetPhyll]

Nice video! Very usefull! thanks for your work👍🏼

[@RevolutionX]

Glad it was helpful! ✌️

[@MrDevo5]

thanks for making this video dude ,ive just completed mine with a fusion se 1800kv

[@RevolutionX]

Nice! Works great in this rig! ✌️

[@actonscaletrails2753]

thanks for making this video. My 4ws Capra arrives today and I was curious about being able to use a fusion. PLBTF 2022 was a blast. Maybe I'll see you out there next year.

[@RevolutionX]

Hey no problem! I saw some of your scale town work out there this year! If you ever see me with one of my trucks, just say hi!

[@RCGents]

Nice upgrade for the Capra 😉 Have a nice day 👍 Cheers

[@RevolutionX]

Thanks 👍

[@RCGents]

@@RevolutionX Welcome my friend 😉 I appeciate your visit and comment 👍 Cheers

[@sreissing]

Great video, I am about to do the same upgrades. Cheers!

[@RevolutionX]

You'll lke it! 👍✌️

[@offroad1911]

I installed the Spare Time Hobby flat skid with an Element Stealth X trans. and new Hobbywing Fusion SE 1800kv.

[@RevolutionX]

Awesome, that should be a great setup! 🤙

[@perohijo]

I like those panels! where did you get them?

[@RevolutionX]

I painted them! This was a kit build. The panels come clear. 🤙

[@tjpighin]

Did you like the fusion more than the axe in the end? Pros and cons to both. Those were the two options I was going for

[@RevolutionX]

I actually do. I like the space savings of the fusion, and I don't use some of the other programmable features that the Axe has. The Fusion basically covers all I would need for crawling and I definitely like the fact that I don't need to worry about putting the ESC somewhere.

[@Robster19851]

Connecting the Vader skid back to the car (4 screws ) are they the original screws or do you get new 1s with the skid?

[@RevolutionX]

They are the original screws.

[@orang7789]

Hey, what kind of bit did you use to remove the bottom links inside the skid? The ones at 5:02

[@RevolutionX]

I used my MIP 1.5mm speed bit.

[@travisgross9570]

now to figure out how to gear it down below an 11 tooth. i ordered underdrive diff gears.

[@RevolutionX]

You can get it down to 10t if you use a different screw with a smaller head for the motor mount.

[@travisgross9570]

@RevolutionX actually picked up a vitavon transmission. Am running a 9 tooth with underdrive. The 8 tooth was loud as he'll. The 9 tooth runs really quiet

[@RevolutionX]

@@travisgross9570 that'll work!

[@EastCoastLtd]

Will the new 2300 fit into the factory skid?

[@RevolutionX]

I don't know for sure, but if it's the size of a 540 can it should.

[@sammygee27]

Are there any additional screws that you need to buy?

[@RevolutionX]

My memory sucks, but I don't believe I needed to buy any screws. I'm pretty sure you can re-use everything you already have. I think some screws and lock-nuts are provided for the link mounts, but other than that, you should have everything.

[@kez850]

So the Hobbywing fusion 540 fits in the stock skid?

[@RevolutionX]

No, you'll run into issues with the link mounts. Well actually it depends on if you have the older Fusions or the newer fusions. The older Fusions were a little longer and wouldn't fit unless you use an aftermarket skid. The newer Fusions are shorter, and those might actually fit.

[@kez850]

@@RevolutionX I actually put in the newer one last night but had to shave the link down a little more than I would have liked. It works but I’m mentally prepared for it the plastic to break after a hard fall lol.