Axial RR10 Bomber Budget Build - AR60 Dual Shock/Link Mounts- Episode 17

[@csmallstar]

Do you have a dedicated bomber crawling or trail crawler build? Or upgrade list?

[@TheSalsandoval1]

I'd like to say thanks as I'm new to getting back into rc cars, and am learning so much about things I know I'll need to change out or upgrade, so thanks!

[@evanharich9769]

What are you going to build next?

[@HarleyDesignsInc]

+Evan Harich either an SMT10 based Mega Truck or working on the SCX10-II more.

[@two_seven_media]

Scx10 2 has kinda bad articulation, any tips?

[@evanharich9769]

+ ljay. There are a few mods, you can move the rear shock hoops forward on the chassis and drill new holes for them. And you can use a Dremel to take material out of the notch where the rear driveshaft enters the skid pate. You will need to raise you body so it doesn't rub, personally having a great deal of flex is not that important. Hope this helps.

[@HarleyDesignsInc]

+ljay having more than the height of your tire isn't really needed. Out of the box the SCX10-2 has plenty of flex. People just need to understand that increasing flex will hurt their performance in the end.

[@codyhaines1818]

Can you do the Dmg Ifs b1b bomber. I really want to see how it goes

[@johncarmichael8126]

are you going to crawler palooza this year

[@MASTEKNIK]

is there oing to be a next episode or is the series done i am about to pick mine p and would like to follow along not sure if this was the end

[@TheRolands81]

This thing looks solid.Any upcoming videos on PRT build?I hope you didn't pass on it.

[@tomcullett8107]

Sorry off topic but when can we see your king sling build ? I have a king sling body that needs paint and I'll have me a king sling soon. Not using smt though, I built mine out of scx and the strc monster kit. Can't wait to see yours !

[@HarleyDesignsInc]

+Tom Cullett I hope to start one in the near future based off the Max D release from Axial.

[@barharborbasher249]

Well Harley you've definitely built a badass rock basher 🍻 hopefully you're next life endeavor will be focusing on 1/8 mountain bashers lol.. Any info about the V2 AR60HD with a boot ? I'm still in the process making CVDs for my 2028 Bomber XL ... I perchanced XL center CVDs but noticed that they are 5.5 mm..no bearing that size... if I turned them down to 5mm do you think they would be robust enough? Thanks for your time👊

[@barharborbasher249]

PFFFF.... thanks again.... why try...

[@collosous]

hi there just like to say that this channel really informative. watching the channel has helped me almost decided whether I should get a bomber or a yeti, the only thing left to say is I wish I had found your channel sooner like ten years ago lol keep up the good work! looking forward to seeing the next upgrade on the bomber, man that's a sweet truck!!

[@2cwik4u104]

awesome looking upgrade. that downhill run was sweet and the 180 landing was pretty cool.

[@CarminesRCTipsandTricks]

Just a FYI..... I put Josh's Bomber List on my Channel - in CORRECT order, and NOT stopping at episode 14!! 😉🍺🍺

[@markmenzies612]

Hi Harley, great build series! Just curious what motor and esc you would have used if you were sticking to the budget? Looking for a cheaper solution than what you are running. Also I noticed in your scx10 build you went brushless, how does this setup go crawling? Thanks for the info you provide.

[@HarleyDesignsInc]

+Mark Menzies I only run brushless really. It handles slow speed crawling well as long as you use a quality setup. If I were to try and go more budget friendly I would have went with a Mamba Max Pro or Holmes Hobbies BLE ESC, not cheap but not as expensive, and I would still have to go with either a Tekin Pro4 or Holmes Hobbies Puller Pro. Not a ton cheaper overall but still some savings.

[@markmenzies612]

Ok great, thanks for the info. Being in Australia the dollar conversion kills us for quality products like those. I will have to slowly save up to upgrade. Thanks again.

[@piercethejyll]

Josh a while back you said you were going to test the castle creations slate motors. Did you get around to that and feel like it would be a good addition or still like the tekin motors ?

[@HarleyDesignsInc]

+Krazy Kittys I have been running one of the 1406 motors and it's great. The 1410 or 1415 is a better choice for the Bomber.

[@angellll2393]

could some one tell me a good batery for my axial scx10 deadbolt

[@ciaranfarley]

what HiTec servo are you going to put in it ? im getting the kit version and want to put the HiTec servo you want use in it, I was going to use savox but you said they werent good

[@HarleyDesignsInc]

+Ciarán Farley-Toone (cTurtle98) I chose to run a Futaba. The S9177SV is a killer servo for the money. Most high end servos are going to be in that $125-150 range. The Hitec 7950 would be the other option.

[@ciaranfarley]

Not a waterproof one ?

[@douglasw9385]

What happened to the build series... toy said there'd be more coming😢😢😢

[@ciaranfarley]

when is the next episode? its been over a week...

[@WRENCHDOTCO]

I saw a pickup truck that said "harley designs" across the side of it the other day. Not sure if It was you or not, was in Wisconsin.

[@HarleyDesignsInc]

+WRENCHDOTCO it wasn't me, I'm out in California.

[@fadedsharp1225]

What happend to the rock bonccer

[@HarleyDesignsInc]

+Faded Sharp I dumped it because I wasn't happy with the chassis.

[@kylewalker1703]

that's a tough n bad ass truck hopefully I kan build a truck as kool as yours

[@phillippressotto]

i see them new axles

[@dillanristow8750]

Can you día losi night crawler

[@HarleyDesignsInc]

+Dillan Pip being that the Losi is an older platform that isn't as relevant any longer, I don't think I'll be doing any videos with them.

[@Firewlkre]

Donner pass , u better start building some tire chains !