Axial Ryft Crawler Build with 3 Gear trans and Dig

[@m4tiger12]

Really appreciate the walk through, thanks!

[@PSF_RC-PatSmageFilms]

Cool build and spot! Last line before the servo went out was nice. 👌

[@rcilluminati26]

Thanks! This rig is so good. I went back with a new servo and killed that one too. lol Got a lot more video at least.

[@QuinnsRC]

That's a bummer about the servo and what a pain in the a$$. Cool rig! I love the rock-bouncer wheel speed it's got.

[@rcilluminati26]

It’s got a very scale bouncer speed to it but still crawls great.

[@Fortes_RC_Adv]

Nice machine😊 The ryft is awesome 👌

[@rcilluminati26]

It’s my favorite RC

[@paulreese8696]

I’m trying to change to the 3gear onmy ryft, but just don’t see how to make the driveshaft coupler work. Everything else I can figure out, ifyou could explain or show I would be grateful. Thanks

[@rcilluminati26]

If you pull the driveshaft apart and look into the hollow tube, you will see a screw. Remove it and you can pull the universal joint out of the plastic tube. The joint from the scx10 will fit into the Ryft axle tube.

[@justinvess9667]

When you was running the traxxas spur was you running single speed or 2 speed

[@rcilluminati26]

Single, locked in low.

[@Crawlstars420]

What spur gear did you put on the transmission?

[@rcilluminati26]

I used the gear that came with the trans, I believe its around 86T

[@zaccampos8898]

What links did you use for the rear replacing the trailing arms ?

[@rcilluminati26]

They came from the UK, Center of gravity RC.

[@Tacoma34v6]

@@rcilluminati26 thanks for the tag