AXIAL SCX24: MICRO SHARK Conversion: Power Hobby Suspension Upgrade

[@GrimJerr]

Just Got my Deadbolt, not even unboxing it until all my Mod parts arrive. I have some Treal Shocks on the way in the mix.

[@ProNoobRC]

We have almost 10 of these micros lol can’t get enough of the scx24 I think there is more options support out for them than the full size 10.3 right now

[@GrimJerr]

I am really excited about building my 1st one out, I have a lot of parts on the way and a Deadbolt here on the shelf still in the box, and I am already thinking about my second SCX24 build. Discovered 1/24th slot car bodies online, have a 46 Willy's and a 70 El Camino clear lexans on the way for that custom look, going to have fun deciding how to trim and mount them. when I get tired of the deadbolt or want to show off at the Hobby shop ; - )

[@GrimJerr]

oops 68 www.ncphobbies.com/straightline-1/24-clear-bodies/straightline-stl65-straightlines-68-el-camino-stock-lexan-clear-body-slot-car/stl65/

[@GrimJerr]

even with a light bar or roll bar this El Camino should have goof CG, as long as everything will fit underneath

[@EXPIOWA]

That course is awesome.

[@ProNoobRC]

Thank you!!

[@GrimJerr]

Wowzers that is Sharp, Nice color scheme and layout. Shapeways, 3D parts are on point.

[@ProNoobRC]

Top notch design too! Mod19 nailed it on design for sure! Everything lined up so nicely and the way it all fits together in the end is amazing exactly how I would design and build a truck and somehow he managed to fit it into a micro lol cheers!

[@andyrichey1192]

I used green slime, on the end of a toothpick, just to lubricate the walls inside the shock, get rid of the bounciness . Seems to be working pretty good, for me anyways

[@ProNoobRC]

I really need to pick up some green slime kind of a noob when it comes to that stuff

[@noahdobesh7015]

What wheels are those they look really good

[@ProNoobRC]

RC4wd 1” steelies mounted in reverse by flipping the wheel hex to outside

[@noahdobesh7015]

@@ProNoobRC you should make a vid on how to do it

[@andyrichey1192]

Yeah the stock shocks, has adjustable preload, there is a little snap ring pull the spring down and it stays I just wanted a little higher ride height, for the tires don't rub the body.

[@ProNoobRC]

I found that it would pop back up every once in a while to I’ve seen some guys put his tiny zip tie behind it to hold it down

[@SeamusMacMattain]

I have the "same" shocks on my deadbolt, only mod I have for it..... mine are Hot Racing though.... In my opinion, the Treal, HR and Power Hobby shocks are all just rebranded, they are the same thing though... LOL I put exactly the same amount of the same oil in mine as well!!! Thanks for sharing.... I also used the black springs subbed... thought I already was after I saw the micro shark build...

[@ProNoobRC]

Yes I agree they’re the same ones just rebranded for which ever company was paying for logos lol. Cheers bro!

[@randall4411]

Looks like you got it right . Cool lookin course.

[@ProNoobRC]

All the different colours on there right now need to be blending together I was playing around with wood stains on top of the concrete LOL turns out I can get some pretty cool effects next time you guys see this course there will be a video filmed on it and some running on it of our trucks were hoping to get that done today

[@SaltyBob355]

That course! Wow, looks like Moab or Sedona!

[@ProNoobRC]

Cheers that’s what we were going for stay tuned we have the devils hot tub version 2.0 coming up

[@RCModSquad]

Nice setup on there now. Thanks for the info. Have a great day and be safe out there!

[@drewdavis4162]

Can I buy this body anywhere

[@ProNoobRC]

Yes from shapeways

[@ProNoobRC]

Mod19rc Microshark.

[@drewdavis4162]

Thank you

[@Danielxperez14]

how can i purchase that body?

[@ProNoobRC]

Shapeways. Mod19rc Microshark

[@Danielxperez14]

@@ProNoobRC thank you!

[@19961djs]

What size alennkey is used for the scx i lost my tool and am looking to get a set of alen keys but dont want to buy them if they dont have the right size

[@ProNoobRC]

.050.standard. Most good sets have them the one I’m using is from a dynamite set

[@19961djs]

Have u tried relocating the top shock mount to the frame

[@ProNoobRC]

No that would raise COG which is bad Do you want to have a low centre of gravity

[@paulschryer9571]

Yes, this crawling scenery is realustic, for sure !! 😁👍🇺🇲

[@ProNoobRC]

Cheers! Thank you!

[@travissierra21]

So I just subscribed,good video! so I got two sets from pro line after watching your video. One for the Chevy C 10 one for the deadbolt. Frances over at RC review recommends green slime also to coach the insides of the shark cylinders for dampening affects.

[@ProNoobRC]

Hello! And thank you! Yes I am thinking something a bit more viscous would help

[@ProNoobRC]

A good friend had given me a tube so next clean up I’ll swap it pop

[@ProNoobRC]

Out

[@Cbam871]

sweet! what's the song playing at the end?

[@ProNoobRC]

The song is Autonomic by Valente, found on Epidemic sound.

[@Cbam871]

@@ProNoobRC thanks man! Its pretty catchy

[@jerrodarndt4012]

Nice! Makes me want to get a 24 now!

[@ProNoobRC]

You definitely need one

[@theplugofoc6522]

wow that 24 is looking sick, is that frame metal or plastic on the micro shark?

[@ProNoobRC]

The frame is still steel from the scx24 it builds off the frame. Cheers!

[@theplugofoc6522]

@@ProNoobRC ok cool, thanks

[@mickd8188]

Awesome build... you guys's trucks look great!.. Also your indoor course looks amazing, love the terrain and colours and typography your trying to re-create. I'm not into the micro trucks but you had me watching to the end, I think the way you've built the trucks and track made it more appealing. Micro shark is sick.. I can't fathom being forced indoors for months at a time so can see why they are popular around the world in colder climates. Cheers mates👍

[@ProNoobRC]

Yes everything we enjoy is outdoor based and we are forced to shut it all down each year. Some of the brave go out but trying to control RC with mittens on is next to impossible LOL so we choose to do the micro side of the hobby and thankfully Axial jumped on and started pumping out these SCX 24s which are super capable and super fun thanks for the kind comments and stay tuned We are working on the course there is a whole other 10 feet to the left that we just reworked cheers have a great weekend

[@paulettesaunders6003]

I cant Believe After Buying The Yellow Mini Bus (nick man of beloved Jeep)and seeing all these Bouncers and ugly 3d printed stuff,I come across this Amazing Real Looking What I call A Jeep, My Gosh Thanks My Friends,if u reply Ballpark how much to make a Cool Jeep like I found hear, and I am all way look for buying parts ,most blow me off,hold on Make me fill stooped for asking or saying that,well there have a point,my hope to finally getting help for my disability and as of now money is so few and far between, I do what I can Disabled mean poor forever, but doesn't mean I shouldn't be able to get some enjoyment from life! This Jeep I see Know was what I dreamed of in Hi-school never happened Gosh how Amazing it would be to get my SCX Look Rite, Anyway Thanks for the Hope,Thanks So Much!!👍👍👏👼

[@ProNoobRC]

Lol no worries mate! Glad we could help light that fire!

[@hemitj]

Just found your page. Liking your Micro Shark build. What wheels are you using? How do they compare in size to the stock SCX24 Jeep Wrangler tires?

[@ProNoobRC]

Thank you! The wheels are the 1.0 rc4wd beadlocks flipped reverse for mega offset and tires are rc4wd scramblers

[@FrEzNoGriZzLY]

What tires are those? Sick build btw! I’ll definitely be ordering a body/frame setup myself.

[@ProNoobRC]

Rc4wd scramblers! If ya can’t find any we have a few extra sets we would part with 1 set

[@V8chump]

When you were doing the build on this beauty you said you were sanding the 3D printed parts, what 3D printer/software do you use? I’d love to be able to do some official looking custom stuff myself 😁

[@ProNoobRC]

We use Fusion 360 and tinkercad for our design software. It’s free if you click on hobbyist at checkout! Yay! We like free!

[@thierryalsaco9525]

Salut Ou peut-on trouvé le modèle sur la vidéo Merci