AXIAL SCX6 HONCHO: NECESSARY UPGRADES - AXLES - WHEELS - SERVO

PRONOOBRC back on the bench! In this video we upgrade our new SCX6 Honcho! We run into a couple problems along the way, check it out with us! We hope you enjoy, and stay tuned for more great RC builds!
#axial #axialracing #axialscx6
#axialrc #scx6 #rc4wd
#scale #scalemodels #scalecrawler #scaletruck
#scalebuildersguild #scalerc #scalerctruck #scalerccrawler
#scalerc4x4 #hotracing #mods #upgrades #rcbuild
Thanks for stopping by!!
Get your COWRC products here: www.cowrc.com/
EliminatorRC: (eliminator-rc.com/)
ARNDT U SCALE: groups/46395...
Music by Epidemic Sound (www.epidemicsound.com)
Follow us:
Instagram: @pronoobrc
KZbin: / pronoobrc

[@Doug_Morgan]

I found what works really well for holding the spur gear is an old 14" nylon dog collar I had laying around. Just wrap it around the gear and then use some channel lock plumbers pliers to pinch it closed around the gear where the pinion gear goes in. This holds it super tight and makes it easy to tighten or remove the nut off of the slipper clutch. Similar to using a strap wrench to remove an automotive oil filter.

[@ProNoobRC]

That’s a great idea!

[@michaelkav6345]

Hey sir. That thing is so gorgeous!!! Watching ad I text this. Appreciate you. Have a good weekend!

[@sagnhill]

After running my SCX6 Honcho for over a year I switched all my plastic over to Vitavon stuff. The only stock parts left is the body, L&R frame rails, ESC and motor, and the front bumper.

[@ProNoobRC]

Oh nice!! Would love to but keep buying scx6s lol. I have 3 and Jesse has 1 and another in the works lol.

[@sagnhill]

@@ProNoobRC Id like to get a SCX6 Wrangler someday and build it with different parts such as Treal. But I didn't buy all that Vitavon at the same time. I pieced it together. Over 5-6 months. I will say that Vitavon parts are like aluminum jewelry and the quality is #1. The swaybar system they have is fantastic.

[@CRAZYBUILD349]

thank you for all your infomation, great job, now my turn,, lol,, the transmishion is the hardest, i thank, I did subscribe, and hope to see more, thanks!!!!

[@ProNoobRC]

Nah we just some ugly dudes lol!!

[@jerrodarndt4012]

That is a thickkkk Boi! Almost need a bigger bench for that beastly rig! Looking fantastic bud!

[@ProNoobRC]

Love this scale!!

[@dirtberger4533]

Thank you so much for the video, getting a used scx6 Jeep tomorrow. Keeping my fingers crossed.

[@ProNoobRC]

You’re gonna love it!!

[@Cbam871]

Man I'd love to own that custom build, it's beautiful an I'd take it everywhere an conquer alot of terrain with it. It would be amazing!

[@Rckid28]

Why don’t u link the products you upgraded?

[@JvD1985]

Bought my honcho a year ago nd drive it daily (not through water) and it is bonestock. Only changed the tires a month ago. Still no issues and is going strong!

[@ProNoobRC]

Best damn rtr made hands down!! Really nothing needs to be upgraded outa the box. But you know. It helps a bit

[@crocsonletsgo9665]

14:56 Skil makes a 4v twist action driver that is slower speed and torques everything perfect for rc. Best $25 you can spend on these. Pair that with some MIP speed bits... fackin mint bud!

[@CdnKronic666]

Thanks for the tips and tricks. Just got mine and looking forward to seeing how it handles in Alberta's winter.

[@ProNoobRC]

They love the Manitoba snow so you should be good to go!

[@SteadySpin]

Nice run down and upgrades

[@danmarshall1250]

Like it all

[@bradd145]

You should try the Injora billet aluminum beadwork wheels. They add good weight down low and they are a true beadlock wheel(38 screws per wheel!). Injora makes great products, I use all their stuff on my SCX24 and SCX6. They also make a n8ce dual stage from insert for the SCX6 for around $21 a pair.

[@ProNoobRC]

Yup! We love Injora parts! Use a ton of them! Great product!

[@MagicTurtleProductions]

love the tips thanks!

[@ProNoobRC]

Cheers!

[@DG-bq3uf]

That custom build is ZwEET!!

[@integrityrc7356]

Thanks brother. I have got some free info now with a booking on the 6 for table work 🙏. We riding tomorrow Sunday 30th

[@TheSpeeddemon172]

not sure but you had me cracking up, first time watching your channel im following ya!!

[@ProNoobRC]

Lol cheers!

[@raymonde.tanneratomic-rc9370]

Very nicely explained and technical really appreciate that. Your friendly (RET)SSG Raymond E Tanner

[@TaigaTurf]

My Summit ran fully submerged.. Can this truck do the same? Excellent breakdown!

[@ProNoobRC]

Lol but what about the trans goooop!?!? Lol. I highly doubt this truck could handle full submersion.. Traxxas vehicles are pretty much amphibious lol.! The first day I had my UDR Jesse, and I were ploughing through 4 inches of water. hahah!

[@TaigaTurf]

@@ProNoobRC thanks for the insight; gotta make my scale Tundra Buggy for when I'm back in Churchill : )

[@Evolution8R]

how are those servos holding up long term? did you put a BEC to them?

[@ProNoobRC]

The NSDRC servos are direct powered and can’t be beat!

[@danmarshall1250]

Me likey

[@deltatrick]

I have the Honcho in my shopping cart, ready to pull the trigger. How do you like the alum axles? Did they help settle the truck a bit with lower cog? Sorry for all the questions. Awesome informative videos!

[@ProNoobRC]

The aluminum axles are more for rigidity and to keep the ring and pinion mesh tight. Not much weight is added compared to how much the truck weighs overall but yes, I’m sure he does help a little bit but nothing like on the 10 scales. And you should buy that honcho. You will love it. They are complete game changers.. I hate saying it, but 1/6 is soooo much better!

[@deltatrick]

@@ProNoobRC it's going to happen very soon! Thanks for the info.

[@offroad1911]

I use the same driver and I actually use it more than my Dewalt.

[@drowildcat2960]

What size thickness is the shim that axial end up put in the axles in the updated version did you measure it to see if it was the same as the .02mm I did not see You measure the included shim would like to know if new version had anything/tolerances changed at all or if they just added a .02mm or .03mm one of my scx6's I had to put .03 in thanks appreciate it

[@ProNoobRC]

Yes .02 it is from axial also. Probably the exact same part since Horizon owns all of the companies now lol

[@skipmiller8309]

How can you get the full torque and speed, from the servo, that is advertised for a 12.6v setup when your 3s battery only produces 11.1v?

[@ProNoobRC]

12.6 is 3s fully charged and 11.1 is storage voltage. It’s a measurement of cell range.. very confusing

[@ChiefRickyRC]

Hit the bell again

[@ProNoobRC]

Cheers! We found your page and subbed!!

[@raymonde.tanneratomic-rc9370]

Really want the scx6 honcho, but paint body black like my 2016 4x4 tacoma

[@ProNoobRC]

Ordered a shell to paint black!

[@Mr.NiceGuy80]

Do you think someone could carefully heat the axle housing and straighten that bend?

[@ProNoobRC]

Not a chance. Something wouldn’t fit after. Only option is too swap it out unfortunately

[@Mr.NiceGuy80]

@@ProNoobRC Makes sense. It for sure would knock the link mounts out of whack or something.

[@glennelzinga523]

Odd question here... what bit set do you use with the Milwaukee driver?

[@ProNoobRC]

Hot racing dynamite. Great sets don’t get cheap ones

[@glennelzinga523]

Thanks bro

[@ProNoobRC]

Cheers!

[@plukensteinpaint]

I really want to get into 1/6th scale. I just need to save my money 😅

[@ProNoobRC]

You will love it!!

[@highlifter1634]

Where can I find wheel hub extensions for the scx6 ?

[@ProNoobRC]

Vitavon wheels have 2 offset choices

[@atomos319]

Do you know thye proper part number for the should pins? The book says the p/n is AXI255001 but this is incorrect. I really need shoulder pins but I cannot get them due to the lack of a correct part number!

[@ProNoobRC]

For the steering knuckles?

[@atomos319]

@@ProNoobRC No, the cage hinge for the body, at the back

[@ProNoobRC]

Oh! I can check first thing in the morning for you when I stop at the shop

[@atomos319]

@@ProNoobRC I would appreciate that. however, I talked to horizon today and they say the issue is that they don't make the part yet and they just recommend that I use regular screws for now..... how long has the Honcho been out?

[@mjohnsmith9529]

For the new servo , what website do I find it at..?

[@ProNoobRC]

nsdrcscaleparts.com/

[@ProNoobRC]

Here ya go!!

[@alfonsopreciadogonzalez7298]

Hallo I am racing my 2004 Hummer RC crawler 😊😊😊😊

[@dimitripavlakos1070]

Where are the aluminum axles from?

[@ProNoobRC]

Power hobbies

[@arildjohansen1574]

Hi😁 what type of greas you use?

[@ProNoobRC]

Cow rc Udder Butter 🧈

[@cosmaninashiva6115]

Where can I get the big servo??

[@ProNoobRC]

nsdrcscaleparts.com/

[@cosmaninashiva6115]

@@ProNoobRC Oh Thanks !! But I came from germany, it will be an expensive way. But it is a great servo, cause ist works until 16volts

[@ProNoobRC]

Worth the shipping for sure mate!

[@arildjohansen1574]

Can this car use 4s?

[@ProNoobRC]

Yyp

[@Eren-vu2ug]

First

[@alfonsopreciadogonzalez7298]

2023 alfonsopreciadogonzalez youtuber😊

[@LonerSurfer]

No. No. And no. I like my Honcho just the way it is. I don’t think so. And I like the foams…

[@ProNoobRC]

Come on! Throw da money at it!!

[@DanBrando]

It at minimum needs foams.? And servo??