Axkid Minikid 2.0 Installation | How to install the Axkid Minikid rear facing car seat

[@georgiawaddicor5239]

So much easier than I thought to install! So glad I got this seat for my 18 month old 😄

[@RearFacingToddlers]

That's great to hear. It really is very easy to install.

[@Yooopy]

Great explanation, very detailed and easy to follow. I hope it'll be as easy when installing the seat in my car ! Thank you very much !

[@RearFacingToddlers]

Thank you for your lovely comment. I'm sure you'll be fine, but if you have any questions, please feel free to ask and I will be happy to help.

[@Yooopy]

It's done and thanks to your instructions it was super easy to do. It probably only took me 5-6 minutes! Thanks again !

[@RearFacingToddlers]

That's great, I'm really glad my video helped you. Thanks for letting me know!

[@rachelakam]

Just fitted my minikid 2.0 for the first time with minimal stress, very happy with the fit thanks so much!!

[@RearFacingToddlers]

You're very welcome, I'm glad you found my video helpful.

[@budweizer100]

Such good presenting! One of the best demos I've seen for anything!

[@RearFacingToddlers]

Thank you so much!

[@BatfinksWings]

Great car seat. Myself and my 3 year old were in a minor accident with one and she was safe and secure after it.

[@RearFacingToddlers]

I'm sorry to hear that, but I'm glad the Minikid did its job.

[@liljemark1]

Brilliant advice and an awesome seat! We're going to buy second Minikid 2.0 for our younger child who's almost 1yo. Older sibling can use his seat for maybe 2-3 more years 👍👌 We've had the first 2.0 for maybe three years and have had to fit the seat in several different cars as we've so far only rented a car for whatever vacation we need. Havent't had any issues. The rear facing seat does take space so with smaller cars fitting it behind me (177cm tall) my legs may have less space than I'd like to.

[@RearFacingToddlers]

If you have an age gap of two or more years, your children are unlikely to both be between 18 and 25kg at the same time, so I would get the youngest a seat up to 18kg such as the Axkid Modukid, which takes up less space in the car and gives you more legroom in the front.

[@liljemark1]

@@RearFacingToddlers thanks, good tip! Was looking at different options and info what would make sense in our case.

[@vagsera]

Great video and great demo. I always go back to your video when I need to reinstall my Minkid 2.

[@RearFacingToddlers]

Thank you, that's nice to hear.

[@alicefountain4307]

Thank you so much for this video. It is so helpful. Seat feels more secure then previous isofix!

[@RearFacingToddlers]

You're welcome!

[@KungFoo1]

Thanks for this. In my car there is no gap at all in the front seat rail and a butter knife won't help either. Will try and see if a mechanic can unscrew and rescrew the seat with the tether points in.

[@alsdecknameani2522]

Very good. Thank you for the instruction and for the tipp, how i can stand the axcit on the sit. So you have shown, the child longer can sit in this because the legs more free. Thank you very much for this.

[@RearFacingToddlers]

You're very welcome.

[@sweety4987]

Super vidéo. Explications bien détaillées et simples à suivre. Je suis plus sereine pour installer mon minikid. Thank you very much.

[@KasperochSiri]

I was so glad to find this video because I have been trying to find cars with Isofix in the front seat and I can't find a single one (I live in Sweden), as I'm planing on having kids without a partner and want to have the kid in the front passanger seat. I found the ones where you only use the seatbelt to fasten the baby carseat and that didn't feel safe to me plus with this one, Axkid Minikid, I could leave the carseat in the car and just remove the baby! Those extra "straps" under the seat made this one feel alot safer! Thanks for this video!

[@RearFacingToddlers]

That's great to hear, and the Minikid is a brilliant car seat. Do be aware though that it is not suitable from birth, so you will need an infant carrier for the first year or so.

[@flpelr]

The renault grand scenic has isofix on the front passenger seat

[@Milks808]

This was very helpful, thank you!

[@myyoutubehandle-rr]

Thank you so much. This has been very helpful.

[@RearFacingToddlers]

Thank you.

[@TheFaridAfghan]

Thanks a lot. Clear explanation and demonstration. Regards from Norway

[@RearFacingToddlers]

You are very welcome!

[@sophiemcgrath9801]

Brilliant. Super helpful and easy to follow. Thank you so much xx

[@RearFacingToddlers]

You are so welcome!

[@pro_fluke]

Thank you for the guide was very helpful

[@RearFacingToddlers]

You're very welcome, I'm glad you found it helpful. :)

[@beckipike]

Thanks for another super clear video! You really are the best around at explaining this stuff, thank you! I had been putting off adjusting it for ages but am now confident I can do it 😅

[@RearFacingToddlers]

Thank you so much, that's a lovely thing to say. :)

[@khornenood]

Nice! Thank you!

[@jonathang1583]

Thanks a lot that was so helpful!

[@RearFacingToddlers]

Thank you. I'm glad I was able to help you.

[@martinholmgaardcarlsen3577]

Very nice video. I'm still debating with myself about starting with an isofix mounted Axkid Modukid for behind my driver's seat, as the Minikid really looks like it will put a lot of deformation and marks on the car seats. But my boy's latest measurement indicates that he is 90th percentile. Right now he is only 8 months but his current infant seat is getting too narrow.

[@RearFacingToddlers]

Hi, On the 90th percentile he really does need a seat up to 25kg as one up to 18kg like the Modukid won't last him long enough. I have been selling Minikids for seven years and I can honestly say that no one has ever complained about the seat leaving permanent marks on the vehicle's upholstery. If you are worried about the recline bar leaving a dent, you could add the wedge which has a flat bottom.

[@alexa.3840]

Thank you maam' :D

[@RearFacingToddlers]

You're welcome 😊

[@stupot008]

This was very helpful. Thanks

[@RearFacingToddlers]

You're welcome!

[@michalmikilo]

Great guide, thanks!

[@RearFacingToddlers]

You're very welcome.

[@mariiveli623]

Thanks for great explanation. Please, do you know how to attach extension leg, because I can't push extension leg in metal hole (missing maybe 2-3 mm for proper instal).

[@RearFacingToddlers]

It sounds like your extension may be faulty, please contact your retailer.

[@benohanlon]

Unclear how you tied the staps... did you put it through the metal loop or make a knot with the fabric?

[@RearFacingToddlers]

The white stitching on the straps are on a double layer of webbing. You pass the end of the strap under the front seat's runner rail and then pass the metal bracket through the nearest double layer to make it as short as possible, and then pull tight. You don't pass it through the bracket or tie the strap in a knot.

[@Pedrorcs]

I have a question, is there supposed to be a slope on the chair? meaning, different cars have a different slope on the back seats, and also the chair has adjustments in the front, how much should I tilt it? is there a line or something that is supposed to be horizontal when installing it?

[@RearFacingToddlers]

You should aim for the car seat to be as upright as possible with just enough recline to stop the head from falling forward when the child is asleep. In cars with sloped seats, car seats like the Minikid can be too upright, and if that's the case you can install it with the optional recline wedge under the recline bar. There is no line, you can play around witrh the position of this seat quite a bit, as long as you don't over recline it. The backrest should be no more than 40º from vertical. You can use a spirit level app on your phone to measure the angle if you need to.

[@TeresaWalker-n1y]

I’m confused, I watched the Axkid video on their website and they don’t thread the car seatbelt under the seat cover, it goes on top! 🙈 which one do I do?

[@RearFacingToddlers]

It’s fine either way, it make no difference to the seat’s safety. I prefer tucking it underneath because it looks nicer and keeps the belt clean.

[@Gallery1111]

Thanks for this great video

[@RearFacingToddlers]

You're very welcome. :)

[@carly-emmajones4330]

How many times are you pulling the seat belt through the holes? I was under the impression it’s only once but this video implies that it’s more than once. A bit confused now.

[@RearFacingToddlers]

I'm not sure exactly what you mean... The belt goes up through the hole nearest the door, then across the seat under the cover and down the hole near the belt buckle. You then pull the belt tight and lock the clips.

[@MrStevenastley]

Is it correct that when using the tether straps, you will lose quite a bit of room to move the front seat back on the rails? The knot/loop restrics how far the seat can go back and I don't want to force it any further in case the straps become damaged, but I find my driving position is much further forward now because of the straps?

[@RearFacingToddlers]

You may need to slide the front seat a bit further forward to get the seats under the rails. Leave the straps open, slide the seat back to the desired position before fastening the straps.

[@mariomescarti4726]

Great video. We are looking for a car and we have the minikid 2.0. Do you know which cars would allow for it to be installed leaving enough legroom both for the kid and the passenger, who is about 6 feet tall? Thanks for your help!

[@RearFacingToddlers]

It's hard to give a full list, generally you'll get more room in people carriers. But there are plenty of five-seaters that are spacious too.

[@RetroFirepower]

Great video, good job

[@sarahwilson226]

Does the mini kid take up as much room as the axkid move please ? Bigger ? Smaller ? Xxx

[@RearFacingToddlers]

Those two seats are identical in shape and size, the Minikid just has more fancy features.

[@RG-wc6tk]

Hi, on our seat, when we come to undo the child, the head rest doesn't automatically go all the way back to the top when we pull the straps to loosen. We have to manually push the headrest all the way up....any idea why?

[@RearFacingToddlers]

Does it make a noise and seem stiff when you pull it up? It doesn't always go up by itself, I'm not sure why, but it's not a fault unless it doesn't move easily and then it needs to be repaired.

[@RG-wc6tk]

@@RearFacingToddlers no not particularly stiff or noisy. It just feels like it comes down really smoothly but it's almost manual to push it back up afterwards rather than automatic

[@samiheikkila4744]

Perfect 🤘🏻

[@RearFacingToddlers]

Thank you.

[@amabla975]

great video. can you tell me if this seat has ASIP 'port/pad' on both sides, so allowing it to be fitted on either side of the car, as required?

[@RearFacingToddlers]

Hi, It comes with one ASIP block, which can be fitted on either side of the seat, so you just put on the side nearest to the door.

[@amabla975]

@@RearFacingToddlers thank you very much for the info!

[@lindanatha5796]

I have an opel meriva 2011, and the rails of the front seats don't have space for the tether straps... I don't know what to do

[@RearFacingToddlers]

Have you seen my video that explains how to attach the straps? kzbin.info/www/bejne/qnXao36cmq1_rdk In some cars it helps to move the front seat all the way forward and then pass the strap under the rail a bit further forward, sometimes there a bit of a dip in the carpet further along. And then you just slide it back when it's under the rail and move the front seat back. Sometimes the rails can be very close to the floor and then you will need a blunt knife to push the straps under the rails.

[@lindanatha5796]

@@RearFacingToddlers just saw the video. Thank you. I will try these solutions

[@seldaboy406]

Could you do a installation video with the wedge please x

[@seldaboy406]

Not sure what I have done wrong but the car seat has moved position. I think I'm not fitting the wedge properly. Whereas the other car seat which you have fitted in my car is still in the same position 🤔 I am doing something wrong

[@RearFacingToddlers]

Hi, The Minikid's recline bar needs to sit in the groove in the wedge. If you look at the wedge from the side, you will see that the flat side is slightly higher than the angled side. Place the wedge in the car with the flat higher side towards the vehicle seat's backrest. Put the Minikid in the car with the recline bar (which I always extend) in the groove. The wedge isn't as wide as the bar, so make sure it's in the middle. Then tighten the seat belt and lock it, attach the tethers and tighten them and then extend the leg. I will try to do a video when I have a minute. Margaret :)

[@seldaboy406]

I didnt realise one side was different. Thank you x

[@jingberces]

Would it be possible to use this in a 3door Mini?

[@RearFacingToddlers]

I have fitted one in a three-door Mini. It doesn't leave a huge amount of legroom in the front seat, but it's not impossible. facebook.com/RearFacingToddlers/photos/a.282375891906267/1544618209015356/?type=3&theater

[@andreasanchez3394]

What if i dont have the tether straps😅

[@RearFacingToddlers]

There is always a pair of straps included with the seat. If you have lost them you can buy them separately for £24.50. (Aug ‘24)

[@Eva93514]

Can I install the minikid in the front seat but rear facing?

[@RearFacingToddlers]

Absolutely. It's a rear facing only seat anyway, so you can't ever turn it around, but it can definitely go in the front seat. I explain how to do it in this video: kzbin.info/www/bejne/o5_JfmdjgZ2jp5o

[@Polon_210]

Hello, in what car You instaled RWF ?

[@RearFacingToddlers]

The car in this video is a 2016 Landrover Discovery Sport, but the Minikid will fit in virtually any car.

[@elizabethbrattle2043]

Hi, do you know what height this seat would go up to?

[@RearFacingToddlers]

Depending on the length of the torso, the Minikid will last most children until they're around 120 to 125cm.

[@paulofarrell6498]

Rear Facing Toddlers If it depends on the length of the torso, how do you judge when the child is too tall for it?

[@RearFacingToddlers]

Just like any other car seat that has a headrest, it is outgrown by height either when their shoulders no longer fit under the headrest, or when the eyes are level with the top of the headrest.

[@haydenlee2610]

This looks dangerous, the kiddos head is way too far above the shell, and the seats bracing so in a crash the head would hit the front seat. That doesn’t seem safe

[@RearFacingToddlers]

The comments that you have made suggest that you are from America, where car seats and the rules on how they should be used are different. This is a European seat, installed and used correctly and safely.

[@haydenlee2610]

Rear Facing Toddlers does that mean America seats arnt safe? How is it ok for it to brace tho? And the head above the seat how is that safe? Pleas I don’t get it, also if us seats arnt safe why would I want my kid in one😢. It’s confusing

[@RearFacingToddlers]

American seats tend to be more reclined, so in a crash the child can slide up the seat's backrest and risk head injury by striking the back of the front seat. This is why in American seats the head has to be below the top edge of the seat and the seat is not allowed to touch the front seat behind it. European seats are more upright so rather than slide up the backrest, the child is simply pushed back. That way there is no risk of the head making contact with the back of the front seat. The seat bracing on the front seat minimises movement in a crash and also helps ride down the crash forces.

[@mikespike6825]

I fkinkg hate this car seat

[@RearFacingToddlers]

Ok... Can you explain why?

[@Dave-uw2ul]

I hate this seat. I'm already furious at how useless the written instructions are. That's the only reason I'm here. Still ridiculously long winded.

[@RearFacingToddlers]

I'm sorry you feel that way. This is one of the best, safest car seats you can buy. It takes a little practice, but once you've done it a few times it won't take more than a couple of minutes.