B-2 Spirit Stealth bomber - Foldable, print-in-place 3D printing

STL, 3D print model - fab365.net/items/619
Support me. / goodesign
Body color filament - ZIRO Dark grey PLA
This is the B-2 Spirit stealth bomber you've been waiting for for a long time.
Because the plane is so big, we scaled it down to 1:100. Nonetheless, it is quite large in size.
Those of you who have a large printer should try making 1:72 scale prints that match the size of the airplanes I have made previously.
Numerous details were depicted to suit the size. Therefore, the number of parts is large. But it is very easy to assemble and build.
Because there are a lot of parts, there are some caveats.
1. The main body has supports in several places. Please check carefully and remove these supports first.
2. Be sure to check the positions of the white lines in advance before attaching them.
3. When attaching the rudder plab located at the end of the wing to the wing, be careful not to attach the hinge to the wing.
4. When connecting the wings to the main body, please check the left and right sides carefully.
5. The size of the wing flaps is slightly different, so please check the photos and videos before connecting.
Please check the video for detailed assembly process and details.
With this, three representative stealth aircraft types were completed.
We hope this B-2 bomber completes the series of stealth airplanes designed by GOODesign.
1 : 100 scale
Largest part in printing, size= X 170mm, Y 166mm, Z 105mm, After full assembly size= X 200mm, Y 520mm, Z 54mm
Total Build Time : 4d 1h 15m / Plastic Weight : 318g

[@distractedgeek]

Fantastic work. Great panel marking detail. I am continually amazed by your designs. Keep up the amazing work!

[@GOODesignlabs]

Thank you very much! Please enjoy~

[@brandonamaya4515]

Love your work brother, keep it up!

[@GOODesignlabs]

Thanks, will do!

[@TJoker---]

Another nice one.

[@GOODesignlabs]

Thanks again! Please enjoy~

[@distractedgeek]

Also one request, can you please share the link on the glue you are using and where we may purchase it please.

[@GOODesignlabs]

I use this glue. Please check this link. www.shop.fab365.net/loctite

[@jonathanperez7048]

❤😮

[@GOODesignlabs]

😁😁😁

[@JimmyC_Dev]

Awesome work! Q: The wings appear to be a different color - What filament was used for those?

[@GOODesignlabs]

Body and wing is same color filament

[@doupak]

they appear to be a different colour because they are printed at a different orientation, under indirect natural light it looks normal

[@Fahnder99]

remarkable! Would this also work for resin? (sorry but no clue)

[@GOODesignlabs]

Thanks! But I don’t have resin printer. 😅

[@andrewmoore5712]

Same question, what colour filaments are you using, also what’s the glue ?

[@GOODesignlabs]

I use this glue. Please check this link. www.shop.fab365.net/loctite Also, I use this white PLA filament. www.shop.fab365.net/lerdgepla

[@andrewmoore5712]

Just spotted the Ziro Dark Grey, so is it that and Ziro White

[@GOODesignlabs]

I use this white PLA filament. www.shop.fab365.net/lerdgepla

[@Nerd_Alienigena]

Uma pena , não ter versão para Resina

[@GOODesignlabs]

I don’t have resin printer.

[@electronicsandewastescrapp7384]

print in place? but also assembly required?

[@GOODesignlabs]

Partly, print in place. 😅

[@seanburton3130]

their designs with these models are top notch, partly print in place partly needs assembled with glue. the print in place pieces from my experience with three of their other models is its like combining several parts together that could have been separate, but instead uses hinges and clips styles system to snap together. Extremely well thought out and designed!