B18 turbo stock with ac update, 16psi..

[@Yonelll_Kim]

Adjust the valve lash again, ls and b20 heads like to pop them loose sometimes.

[@civicpride1986]

Yea, just weird it happen after the hard pull i did.. will do it tomorrow and report back..

[@LatinoAD]

Hes right. Mine kept popping the adjustment screw for the valve lash 🙄 after a couple passes at 18 psi with adding timing lol.

[@TurboDub1991]

Do something with that wastegate tube!

[@AntonioEscobedononidajesus_]

It does sound like the valve lash is loose

[@civicpride1986]

Yea that is more then likely the cause, i have to check and see why they are getting lose is that is the case, because i did the valve lash not that many miles ago, about 3k miles ago..

[@Turdsmear]

@@civicpride1986 I have a brand new engine, cams, and everything and had to redo lash after quite a few startups and about 50 miles as the cams wore in.

[@luiscamacho9220]

Sounds like rod knock

[@civicpride1986]

@@Turdsmear this head was already used and should had been broken in, but will check valve lash tomorrow and see if i find anything wrong..

[@civicpride1986]

@@luiscamacho9220 its coming from the head not the block, will check tomorrow once i do the valve lash.

[@LatinoAD]

I adjust the valves papi. I had my b20 turbo in my integra have that noise. My valve lash was loose. You remember my b20 turbo integra verda papa?. Estoy en Asia ahora.

[@civicpride1986]

Yea i remember the integra and glad your doing alright man, take care down there...

[@BlackHmong85]

My b20z2 cam rocker cam loose.

[@Loplyful]

what size turbo?

[@civicpride1986]

Ebay t304 57 trim basic little ebay t3/t4 turbo.. working fine so far.