Thanks! More content is planned for Friday this week :)
@SavoyPrimeable2 жыл бұрын
@@notthatkindofachannel Awesome to hear, looking forward to it... You just gained a new subscriber! What grill brackets did you use for the two additional front lights? They look great!
@notthatkindofachannel2 жыл бұрын
@@SavoyPrimeable They are stainless steel and homemade. I need to replace the H8 lamps on the Discovery anyway, then I can give you the dimensions etc if you are interested. Maybe it could also be a video about the lamps and the brackets ;)
@khalilrazak6486 Жыл бұрын
That is such a cuuuuute cat.
@THEMAYQUEEN14 ай бұрын
I have to change my bulbs too but I have a bull bar installed. So to remove my grille is really tight.but I will persevere.
@FranciscoLopez-se4tz8 ай бұрын
❤ very intereting. Many thanks. I love my LR4
@fj9460-lr Жыл бұрын
Thank you for your help!
@notthatkindofachannel Жыл бұрын
You're welcome! ☺️
@Tom-qf7xt2 жыл бұрын
Hey. Funktioniert das Abbiegelicht noch wenn ich diese Nebelscheinwerfer von Amazon einbaue die du verlinkt hast?
@notthatkindofachannel2 жыл бұрын
Es sollte normalerweise schon funktionieren, da die Scheinwerfer ja nur ein- oder ausgeschaltet werden wen der Blinker gesetzt wird oder die Lenkung eingeschlagen werden. Ab dem Bj 2012 aber wurde diese Funktion in den Hauptscheinwerfer verlegt wenn ich nicht irre. Denn die Hauptscheinwerfer haben ab 2012 die H8 Cornerlights integriert, also zusätzlich zu den adaptiven Scheinwerfer.
@gregt73802 жыл бұрын
Hi Peter, good job! Question: Is this Philips Ultinon Pro6000 bulb Canbus error free, or we need someting else? Regards
@notthatkindofachannel2 жыл бұрын
Hey @Greg T! Yes they are error free and you don’t need something else! 👍🏻
@gregt73802 жыл бұрын
Thank you for your reply. One more, last question: Where I can get a certificate that they are legal in Germany (link?) Next month we plan to go to EU, Germany, to Bad Kissingen for 4x4 Fair.
@notthatkindofachannel2 жыл бұрын
Hey Greg T! It should be downloadable on the Philips website I guess. But normally the box with the LED’s will come with a certificate for Germany.
@tomaszk.75442 жыл бұрын
Hello, do you already have a drawing of halogen mounts and their dimensions?
@notthatkindofachannel2 жыл бұрын
@Tomasz K. For sure! It's been online since a month or so => kzbin.info/www/bejne/hKLLdmuKl8SArLc
@tomaszk.75442 жыл бұрын
@@notthatkindofachannel you are the BOSS :)
@josephzee8 ай бұрын
Hi Peter Im confused , did you replace your bulbs with H7 or H4 ---- your link give me H4 ???? And not H7 . Thank you .
@notthatkindofachannel8 ай бұрын
Hey, the bulbs need to be H7 not H4. Seems that Amazon changed the product link. Thanks for the info! Best, Peter
@craighogg54722 жыл бұрын
Sehr gut! danke für das Video. Wo hast du die runden Scheinwerfer gekauft? Dein Englisch ist sehr gut. Ich habe erst angefangen, Deutsch zu lernen.
@notthatkindofachannel2 жыл бұрын
Hi Craig Hogg! Vielen Dank, ich versuche mich tagtäglich zu verbessern! Dein Deutsch ist aber auch super 👍 Die Scheinwerfer sind Vision-X LED TPX910. (Link: amzn.to/3Jwzw3J oder www.nakatanenga.de/beleuchtung-nach-rubrik/fernscheinwerfer/1891/vision-x-led-fernscheinwerfer-mit-e-pruefzeichen ) Den passenden Kabelsatz mit Stromstossrelais habe ich bei Nakatanenga gekauft. Dieser passt optisch perfekt zum Armaturenbrett des Discovery's. (Link: www.nakatanenga.de/beleuchtung-nach-rubrik/zubehoer/5197/kabelsatz-fernscheinwerfer )
@adeliow8 ай бұрын
Hi peter, where do you buy the bracket for additional two light?
@notthatkindofachannel8 ай бұрын
Hey, I built them on my own. But I uploaded a plan so you can build them yourself. The plan you'll find here => kzbin.info/www/bejne/hKLLdmuKl8SArLc Best, Peter
@giampierogaz755211 ай бұрын
Hi Peter from Italy interesting video i have disco 2012 maby like your i like to replace the original lampe with led and I was wondering if some warning lights might come on ? Thanks
@notthatkindofachannel11 ай бұрын
Hey, no, there are no warnings on your dashboard. The only warnings you get are when you check your car with the IID tool. Then there's a "short curciut" message for your high beams. But you can ignore that because it works really well. I've been using the LED's for 2 years and never had a problem with them! Can really recommend them! Best regards, Peter
@giampierogaz755211 ай бұрын
Ok Thanks regarding the lamps you use this: Philips Ultinon Pro6000 H7 LED ?
@notthatkindofachannel11 ай бұрын
@@giampierogaz7552 yes ☺️
@giampierogaz755210 ай бұрын
Hi Please I didn't find the compatibility of this LED lamp for LR 4 on the Philips website. Once installed, do any error lights come on? Thnks
@tomaszk.75442 жыл бұрын
Did you do the fixings for halogens yourself or can you buy one somewhere?
@notthatkindofachannel2 жыл бұрын
Hey Tomasz K.! No, I made the brackets for the additional headlights myself from stainless steel. I will make a video of them and post the dimensions. Then you can make them yourself or have them made.
@tomaszk.75442 жыл бұрын
@@notthatkindofachannel Cool !!! I will be waiting for the link to the film, the mounting itself is simple, only the angle of the bracket's exit through the dummy is important :)
@notthatkindofachannel2 жыл бұрын
I will post it here in the channel so everybody else could use this! Glad to help!
@tomaszk.75442 жыл бұрын
@@notthatkindofachannel when can you expect any film and dimensions regarding halogen brackets?
@notthatkindofachannel2 жыл бұрын
@Tomasz K.: I can’t make a promise but maybe till the end of next week.
@waltergabauer Жыл бұрын
Hallo Peter. Laut Philips Fahrzeugliste dürften die H7 nicht für den Disco zugelassen sein. Falls doch sende mir doch bitte die Bescheinigung. Und ja ich weiß das ich etwas spät dran bin für diesen Beitrag.
@notthatkindofachannel Жыл бұрын
Hallo Walter, nein momentan gibt es leider von keinem Hersteller für den D3/D4 zugelassene LEDs mehr. Aber selbst wenn sie in Deutschland und Österreich zugelassen sind, ist die Verwendung in den meisten Europäischen Ländern nicht erlaubt. Bei billig China LEDs sehe ich das durchaus ein, aber bei renommierten Herstellern verstehe ich das nicht ganz. Zumal es ja eine allgemeine Verbesserung der Sicherheit ist.
@slavwar65089 ай бұрын
Originally you have xenon lights there ?
@notthatkindofachannel9 ай бұрын
Hey, no originally there where regular H7 light bulbs! Best, Peter
@vmvmvmvmvm2 жыл бұрын
@notthatkindofachannel Is it possible to do the same with low beam lights? Thanks!
@notthatkindofachannel2 жыл бұрын
Yes, the bulbs can be used for both, low and high beam. 😉
@modellbobby Жыл бұрын
why didn't you use them for low beam ?@@notthatkindofachannel
@notthatkindofachannel2 жыл бұрын
Hey guys! If you want to know how the brackets look like and can be built yourself, you can find a video here ==> kzbin.info/www/bejne/hKLLdmuKl8SArLc
@josephzee8 ай бұрын
:) you video is confusion for me --- high beam / low beam H7 -- H4 ?? Help .
@notthatkindofachannel8 ай бұрын
In my black Disco the high beam bulbs where H7 and the regular where D3s Xenons.
@modellbobby Жыл бұрын
why didn't you use them for low beam ?
@notthatkindofachannel Жыл бұрын
Hey, for low beam I’ve installed the Xenons. Best, Peter