Bad stucco patches, how to repair stucco

Bad stucco patches, how to repair stucco.
Ugly stucco patches?
Folks, we are located in Oakland, CA.
FYI, folks, here are all the essential tools we use and recommend on Amazon's website.
www.stuccoplas...
Live long and plaster hats, shirts, and other cool stuff. www.livelongan...
Kirk Giordano Plastering Inc.
Send pictures to Jay or myself at our sites below for immediate bids.
www.StuccoPlas... Kirk’s website.
www.GiordanoPl... Jason’s Website.
In this video, we’re showing you how to remove stucco and then re-finish a wrong cement finish.
It all takes practice learning to re-plaster poor or wrong finishes and textures that don’t match the existing cement wall.
Yes, that’s right, we were considered real plasterers.
First, we removed the old cement stucco, which was ugly as sin.
Once that was done, it was time to clean it up, apply a bonding agent, use some mesh tape around the perimeter crack, and then apply a coat of finish stucco to match the existing stucco as closely as possible.
No problem if you know how to do it.
The caulking I applied in the hole is called Sika Flex. It’s an adhesive sealant and incredibly strong.
Just don’t get any of that caulking on you, as it’s tough to remove as it’s polyurethane caulking.
It’s so strong a few drops will hold bricks together.
That’s mighty strong to be alright.
• Repair bad stucco patc... Fix ugly window patches.
• Stucco and paint the s... Rapid Set Stucco, Paint the same day.
• Repair ugly stucco tex... Repair bad window patches.
• Stucco around a new wi... Apply stucco to a newly installed window.
• Waterproofing new wind... Install lath a new window before stucco.

[@gloriousredleader2346]

I'm not even doing stucco repair and I find your videos fascinating. It's like watching the Bob Ross of stucco.

[@StuccoPlastering]

Howdy Red Leader, you are too kind; thank you for that positive comment. Kirk

[@jackcassidy8121]

I was actually looking up some videos on concrete countertops when I came across one of your videos that covered different types of stucco finishes. I dont have any plans at all to do any sort of stucco work but the topic just interested me. The video wasn't ultra time consuming so I watched it. Now almost 2 hours, 4 chocolate donuts, 1 family size bag of doritos and a 2 liter of code red have been annihilated as I remain right here glued to this channel watching more and more of your fine videos. I don't know what to say fellas. This certainly is an unexpected 1st for a crusty 54 year Old SOB like me! Hey DIY channel... If your smart. You would be doing whatever you can to put together a tv show on your channel featuring these two by the time the spring line up kicks off!Who in the hell would have ever imagined that stucco could be this compelling??? You fellas nailed it! It's your professionalism, skill level, expertise, customer service attitude, the unmistakable enjoyment you reflect to the viewer regarding your chosen profession, your unceasing attention to detail, skill, knowledge, enthusiasm and penchant for concise and complete instructions. These are all earmarks of true master craftsmen!!! Those old boys over at "This Old House" better look out. Because clearly; There's A New Sheriff In Town!!! That's all I've got....

[@StuccoPlastering]

Good afternoon Jack Cassidy, I sho-nuff like your style, thank you. Bringing peace, love, and brotherhood back to the old fashioned 🌎 “Plastering.” The most comprehensive encyclopedia of plastering on video, by the plastering messengers of KZbin. Over 800 videos 🎭 👀💃

[@frankmajor7152]

You prolly dont care but if you are stoned like me atm you can watch pretty much all the latest series on instaflixxer. Have been watching with my brother during the lockdown =)

[@salvadorhenry3524]

@Frank Major yup, have been using InstaFlixxer for since november myself :D

[@MilciadesAndrion]

This is another example of the quality of the work Kirk does. Excellent teacher and in a matter of minutes he performs miracles.

[@StuccoPlastering]

Good evening Milciades, thank you, my friend.😉 Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@constantreader7944]

I'm watching these videos and enamored. I need to do some stucco and plastering work on my 1928 home. And then I finally, after all these weeks, find out that you are LOCAL! OMG! Does that mean We can hire you? If so, what a gift it would be to have such an artist work on my home.

[@StuccoPlastering]

Howdy Constant Reader, LOL, you are too kind my friend, My home phone number is 510 521-9546 or email me at [e-mail].👍

[@StuccoPlastering]

Morning Pong Ho Lee, thank you. Best wishes and have a Fantastic New Year! Kirk Giordano’s DIY plastering tips

[@StuccoPlastering]

Knowledge of stucco materials some may say with trade secrets too!

[@danielquaternik22]

I have watched your videos for awhile and then a few years went by. Last few days I had to change a sliding glass door for some relatives.( I do a lot of side work ) The door was smaller than the original so I had to build a small wall and match the stucco. Even though I just do it as side work and have done everything under the sun shy of building a house, I've never tried stucco. Thanks to you and your videos, I nailed it. You are a true professional and now I watch your videos just because I appreciate your craftsmanship. Second to none.

[@StuccoPlastering]

Good evening Daniel, bego, give this man a cigar, with that comment you are now my newest and bestest pal, as you prove beyond a doubt that one can learn if they pay attention. Cheers and happy new years.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@joepierson3859]

For the homeowners you can use a reciprocating saw with a scraper blade instead of that bulldog. It's not as powerful but it will work

[@carlmccoy662]

What a difference hiring the right contractor makes

[@StuccoPlastering]

Happy holidays Carl, thank you, my friend. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos

[@gilbertvelazquez1254]

Thank you Jason for putting in the color on the texture really appreciate that

[@StuccoPlastering]

Morning Gil Velazquez, no worries, Cheers, kirk giordano

[@tom0428]

Kirk, you are an artist.

[@StuccoPlastering]

Morning Tom Lee, thank you, cheers, kirk giordano

[@lorenzovalenzuela]

It's cool to be able to see the texture like that . Thanks!

[@StuccoPlastering]

Morning Lorenzo Valenzuela, thank you, that was Jason's idea, in fact I was about to texture when he grabbed the bucket and said I'll be right back, he returned with the deep tinted color to give a better idea of what the finish really looked like. Have a great day! Kirk & Jason Giordano’s DIY plastering and stucco instructional network

[@lancebwilkins]

Terrific video. Putting the tint in for that second area really made the finish easy to see. Great idea.

[@StuccoPlastering]

Good evening Lance, thank you, I was trying to make a point.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@snakedike]

I've been subscribed to your for years but never saw this video. Outstanding. Exactly what I needed for an upcoming project. Thankyou.

[@StuccoPlastering]

Morning Milo, we do have close to 900 videos. Doubtful anyone has seen them all, nor has the time or inclination to view them.😉 Cheers.

[@RaminRnn]

plastering is non of my business but I love the way you work, I really enjoy that.

[@6BoMba]

ramin rnn Same. Always supporting

[@StuccoPlastering]

Good evening fellas, thanks for the kind words, you dudes have a quality style. Best wishes, Mastering Plastering for the beginner’s to the experts

[@tmish969]

Thanks for your good ideas Jay! You are really trying to help out common folks! And it's appreciated!

[@StuccoPlastering]

Hi Tmish, no worries, I was filming it and I could not see what my dad was doing so I knew you guys watching would not be able to either, it only took a few minutes to add some extra color to see what was really going on. Jason

[@mikepennington978]

You are the man. I have learned so much from you. I am now confident enough to do a little patch work and painting. Thank you. By the way I have been watching quiet a few of your videos, Thank you.

[@StuccoPlastering]

Greetings Mike, thank you, my friend. Bringing peace, love, and brotherhood back to the world of Plastering. 🌍 The complete plastering encyclopedia on video, by the plastering messengers of KZbin. Over 850 videos 🎭 👀💃

[@fabianmendoza7061]

Nice job Kirk, you explain it so well. It's great to see a pro do it. Thanks

[@StuccoPlastering]

Howdy Fabian, man, I sho-nuff like you're style. Keep that going.🥳

[@ericcoleman681]

Good Lord my friend that is some hell of a trial work. Your experience shows. Great job my friend thanks again

[@StuccoPlastering]

Howdy Mr. Eric Colman, you my friend have a great style with words, thank you brother.💃

[@supercleanone8038]

I’m bringing the peace and harmony you’ve been perpetuating in the world of plastering you the cold and desolate world of machining😂 Great video brother!

[@StuccoPlastering]

Good Evening Super clean dude. Cool Beans Daddieo.👍 Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@Bub61fd]

Kirk- better give Jason a raise- texturing shows up 100% better- can really see the difference. Great contrast. Bub61

[@StuccoPlastering]

Morning Bob, no doubt, thank you.

[@TheRenpeg]

The second patch looks really cool! Always great work!

[@StuccoPlastering]

Howdy Dusty, that was Jason's idea to use excessive color on the second patch as he knew the camera couldn't show as the color was the same. I would not thought of that! Thanks for sharing brother and have a groovy New Year! The Giordano’s stucco and plaster solutions

[@DavidTermini]

Another fine video. Thanks for showing. Always learn and enjoy.

[@StuccoPlastering]

Evening David Termini, thank you, Cheers and have a Happy New Years, Kirk Giordano’s DIY plastering tips

[@constantout]

Thank you for the color Jason!

[@StuccoPlastering]

No Worries Marius, I figured you would be able to see what my dad was doing with the contrast. Good night, Jason giordano

[@afridfourlegssanders1591]

Kirk you're an artist not just a plasterer

[@StuccoPlastering]

Good Evening Tyler, thank you. Another day at the office for us. By the way, I sho-nuff like your style. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@photodoc100]

Unbelivable,skilled artist.✅

[@StuccoPlastering]

Howdy Photo Doc, thank you, my friend.😉

[@johncasor9698]

you make it look so easy... very nice job...

[@StuccoPlastering]

Thank you! Cheers!

[@lobosolitario.1065]

realy learning from you .. thank you so much for makr all your videos ai keep waching im painter but like stucco work texture and i see it couple of your videos and your one of the best ...

[@StuccoPlastering]

Good evening Lobo, thank you, my friend for the words of wisdom. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@ezakoske]

Kirk, your videos are very helpful! It would be cool to see the finished product after the homeowner had painted it... Come on down to the San Diego Area - my house needs some TLC!

[@StuccoPlastering]

Good afternoon Erik dude, that would mean for us to come back a month later to add a new ending, as all new stucco needs to cure for at least 28 days before painting. BTW, I'd love to move to san Diego, were talking about it strongly as the weather is a bit hotter than where we're located. We have to save some more dough to make this possibility a reality. Live long and plaster teaching repairing your number 1 investment, your home

[@ezakoske]

Yeah, I get it re. waiting on the the stucco to cure. It would be cool to see though. We were just up your way in the East Bay (Martinez) visiting family last weekend. We might even have been able to see Alameda from the Lawrence Hall of Science up on the hill :)

[@whommee]

damn kirk, you got it down to a science,, hell it is even like art!... there was a song once talkin about a mechanic who was " the charlie daniels of a torque wrench",,, well you got to be be the " joe walsh of the trowel"

[@StuccoPlastering]

Nate old buddy, I could have told you that, like that old song I've been everywhere man, well I've troweled everything man. That's how good you get when you love what you do. Best wishes and have a great new year!

[@M4t30Luc7]

You're a magician sir.

[@StuccoPlastering]

Evening Mateo, thank you Sound advice from the plastering messengers of youtube

[@jayc4715]

Good job Kirk!

[@StuccoPlastering]

Evening Jay, thank you Peace, love, and happiness to all Bringing Plastering tips to the world, via KZbin Video

[@josecordero1001]

Gracias por estos vídeos muy bien explicados. Thahks for your vídeos aré very good and great tips U R fantastic

[@StuccoPlastering]

Jose Cordero hola, senior Jose, no worries, thanks for watching and have a fantastic day! Kirk Giordano Plastering tips

[@jamarone5902]

Thank you

[@StuccoPlastering]

You're welcome, my friend.

[@JasonMohammed]

Wow I feel really motivated now!

[@StuccoPlastering]

Morning Jason Mohammed, You can do it brother. If the proper way to correct that patch motivated you, that means I did my job well and showed how to put it back together well. Keep in mind the fella who did the first patch was not that bad, I would say he had at least 5 years in but lacked the fine tuning necessary for the complete process. Best wishes and have a Fantastic New Year! Kirk Giordano’s DIY plastering tips

[@brackco]

You make this look alot easier than I do lol.

[@StuccoPlastering]

Greetings my friend, thank you, after all, this is what I do for a living.😉 Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@elgo93]

Could you have connected the two patches so that there’s only a horizontal edge at the top instead of two vertical in the middle?

[@StuccoPlastering]

Evening Friend, many ways to skin a cat. Sound advice from the plastering messengers of youtube

[@MrGipgap]

Love watching your work Kirk, One question on the crack. Once the calking is applied and then the mesh tape is put on and stucco finish cures it seams like the stucco ends up being about 1/4" or so thick . Like you have mentioned in other videos it will end up cracking all around the patches because thats what concrete does. The cracking I would guess would be small or fine line cracks that then could be only calked I assume and painted again. Maybe the mesh tape will prevent the cracking. Thanks for all the videos and how respectful you are to the previous contractor. Your a good example of how to show respect to fellow woman / man.

[@StuccoPlastering]

Evening Ron, great questions, cracking really depend on vibrations and or movements of the hose, Like slamming a door, this cause vibrations, so the answer to your question is sometimes, it depends on many factors.😉

[@eddiejohnhurst1]

Master At Work!!!

[@StuccoPlastering]

Correctamundo

[@katietatey]

Wow! I wonder if the neighbors thought that was the finished product since as you said, that orange had to cure for 28 days before painting over it! :)

[@StuccoPlastering]

Evening Katie, doubtful as this was the rear of the house. Sound advice from the plastering messengers of youtube

[@951BReiss]

Truly a master

[@StuccoPlastering]

Howdy 951BReiss thank you, I like your style. cheers, kirk giordano

[@bghutter]

Great tutorial... Now I think Im going to rip off my pvc siding and lay some mud

[@StuccoPlastering]

Evening my friend, atta boy. Sound advice from the plastering messengers of youtube

[@drumtwo4seven]

Good stuff 👍

[@VEGASTOLLY]

Kirk, thanks!!

[@StuccoPlastering]

Good Evening Tay, no worries, brother.🏋️‍♂️ Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@captshreddneck]

Awsome thanks for sharing

[@StuccoPlastering]

Our pleasure, thanks for the comment.

[@captshreddneck]

I love stucco and plastering stuff

[@StuccoPlastering]

@@captshreddneck howdy captain, man, you come to the right place. Cheers

[@gladiator22666]

Brilliant......that's how a real repair is done ! Can't believe how bad it looked before you started .......somebody got paid for that !?

[@StuccoPlastering]

Good morning Gladiator dude, it was a bit of an eyesore.😉 Our unique plastering Tip: all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@usmc1992usmc]

I think there are some wider sds chisel bits for the roto drill to take a wider portion off at a time. Think theyre primarily made for removing thinset but I don’t see why they wouldn’t work for this.

[@StuccoPlastering]

Evening Recon dude, no doubt there are many tools that can be used as there are many ways to skin a cat. Bringing peace, love, and harmony back to the world of plastering. With over 800 educational and free KZbin videos, by your favorite plaster geek, “me,” and Jason, my son, the bearded plasterer.

[@rsz90182]

I wondering if the home owner is standing there until Kirk said he was. Lol.

[@StuccoPlastering]

Howdy, of course, he was there; nothing I say can't be said behind anyone's back. If I did so, that would make me a coward. 🍻

[@shaun1258]

Master at work

[@StuccoPlastering]

Hi Shaun, thanks.

[@Nickpaintbrush]

Another good vid Id missed!

[@StuccoPlastering]

Good evening Paintbrush Dude with well over 700 how to video's theres bound to be a bunch more, thank you Live long and plaster teaching repairing your number 1 investment, your home

[@PeterAgostiniJdcap26]

Kirk that was bad ... it looks great now .. on the skim breakout with the bull dog , what if there was bonding agent ? Great idea Jason on the color coat to show it , I guess you can rinse off with water after the demo or just go over it with the right color . Cheers

[@StuccoPlastering]

Morning Peter ol buddy, I saw this the night befor on my e-mail, as this project was an hour from my home, through the picture I knew what had been done. I figured the sides would come off easily but was not sure of the middles, removing any stucco is a bit of a drag, but we had the right tools. Cheers brother, and have a Great New Year!

[@PeterAgostiniJdcap26]

Without tools what does one do. :-) cheers bro/

[@weidenfe]

Hi Kirk and Jay, Good idea to put the colour in so we can see the texture.

[@StuccoPlastering]

Howdy Drew, that was Jason's idea, it was a good one. cheers, Kirk and Jason’s sand and cement rendering videos

[@mattgeiger8247]

The difference between amateur and professional, amateurs may start from scratch and cut corners but the pro can fix anything

[@StuccoPlastering]

Evening Matt, Man, I sure like your style Thank you. 🕵🏼

[@goldenalex]

Hey kirk, great job you did there! the calking you used to fill in the joints...does it have to dry first before you apply your mud or can you just go straight over it?

[@StuccoPlastering]

Evening Goldenalex, Excellent question, I used Sikaflex Polyurethane Sealant, which I covered with fiber mesh tape, then applied a cementitious finish over. The cementitious finish is porous, thus breathable, this professional grade Caulking will dry no matter what is done. When I open a tube we tape it shut and allow no air, but it still dries in the tube once it's opened no matter how well it's sealed. I use it as it has never failed me. Thanks for watching and best wishes, Kirk Giordano’s DIY plastering tips and techniques

[@charrell39]

What a pro!

[@StuccoPlastering]

Howdy Craig, I like you're style thank you.🍻

[@isaacsamuel2673]

Nice job

[@StuccoPlastering]

Evening Issac, thank you Peace, love, and happiness to all Bringing Plastering tips to the world, via KZbin Video

[@SidneyPratt]

Very good, thanks.

[@StuccoPlastering]

Howdy Sidney dude, thank you Live long and plaster Sharing plastering information, as the world can use more teachers.

[@tomkent7690]

I’m loving your videos. But wow America has some very different render finishes to the UK 🇬🇧

[@StuccoPlastering]

Good evening Tom Kent my UK fellow spread. They have different names, but we have similar results. Like your K Rend, there is a USG plaster that either of us can't tell the difference of while applying.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@patriotsleepercell4060]

After the black paper and the chicken wire what do you use for scratch coat before you stucco?

[@StuccoPlastering]

Good Evening Patriot, I use Hansons Premium Lehigh cement plaster sold at the plastering yards such as Westside Building materials. I use this cement plaster mixed with 3 parts sand to every one part cement plaster. By the way, Stucco is cement plaster two words that mean the same thing. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@michaelbaker9746]

thank you

[@StuccoPlastering]

Evening Michael, no worries. Happy holidays and enjoy your thanksgiving tomorrow. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos

[@jamie.777]

I have had my share of chipping gun work .. it's a skill ,no.doubt

[@StuccoPlastering]

It is that, but more a drag than anything

[@killawatt8243]

Outside you are working with the stucco finishing and inside you do the plaster Paris ?

[@StuccoPlastering]

Good afternoon Mor, yes this is the correct terminology. Bringing peace, love, and brotherhood, back into the 🌎 of Plastering. The most comprehensive encyclopedia of plastering on video, by the plastering messengers of KZbin. Kirk and Jason Giordano with over 800 videos 🎭 👀💃

[@GSMSfromFV]

Kirk, Did you skim over the lower area between your two repairs? You mentioned that it was a patch. Was it a non-matching patch, since you were using the area between the windows as your match guide? Excellent shave job, by the way!

[@StuccoPlastering]

Evening GSMSfromFV, we skimmed both patches but took it too the ground. Cheers and have a Happy New Years, Kirk Giordano’s DIY plastering tips

[@ssmotor00]

Can you use hydraulic cement to put prior to the stucco for water barrier purposes?

[@StuccoPlastering]

Evening Paz, Hydraulic stucco is not a water barrier, it's a cement plaster that gets hard fast when water is added to it. I use hydraulic cement plaster often. Peace, love, and happiness to all Bringing Plastering tips to the world, via KZbin Video

[@northface484]

Master...

[@StuccoPlastering]

This one was too fun

[@jasonwells1341]

You guys are awesome! I've been watching tons of your videos to get ready to fix up my house. The old owner of my home put tons of stucco patch (I found about 20 empty small containers of that pre-mixed stuff in my garage when I moved in) all over my house to cover up small (probably just cosmetic) cracks. It looks terrible... I'm hoping to scrape it off and just put on a new finish coat like in this video. What attachment were you using?

[@StuccoPlastering]

Howdy Jason, it's the Bosch bulldog scraper attachment sold on Amazon, The link is in our description, i think. plaster it’s everywhere you want to be Sharing DIY Plastering tips from Giordano Plastering

[@vanessamaass7873]

Hi! I have watched several of your videos and I see that the best way to remove stucco is to use that tool you have. However, I have an issue at my home here in Florida that I was not able to figure out how I will finish it. I have a family room that used to be an exterior patio and is now enclosed as a room inside the house. The problem is, the wall, that used to be an exterior wall, has stucco on cinder blocks. It's very thick and it looks too rough for family room walls. Do you think I will need to apply plaster on the wall after removing the stucco to smooth it over?

[@StuccoPlastering]

Evening Vanessa Maass, if it were me I would not remove it. I would clean it well, apply a bonding agent onto, then apply either 20 minute drywall compound with smooth finish or use Structo-lite plaster. No need to remove, if it's done properly, you won't know the difference of the added thickness of say 1/2 inch. Cheers, and have a Fantastic New Year! Kirk Giordano’s DIY plastering tips

[@vanessamaass7873]

Kirk & Jason Giordanos DIY plastering and stucco instructional videos and forum Thank you so much. That is a great solution, much easier than removing everything. I will definitely try it. I appreciate your help.

[@StuccoPlastering]

Evening and no worries Vanessa, that's what I'm here for. Have a great New year, from the Giordano’s

[@magnus87144]

Do I cure the color coat like the brown coat? Also, how long do I wait before I texture the wall after I out on the color coat? Thank you.

[@StuccoPlastering]

Howdy Tony Dude, No, don't touch the color coat after it's applied or it will look like blue jeans that someone poured Clorox on, lots of various colors. Only the base coats get hydrated. plaster it’s everywhere you want to be Sharing DIY Plastering tips from Giordano Plastering

[@MrOscyn]

Nice. Thank you.

[@StuccoPlastering]

Howdy Mr. dude, no worries my brother. Live long and plaster Kirk and Jason’s plastering pearls of wisdom

[@dnn1412]

do u think it might have been faster using a grinder with a diamond pad instead of the bulldog

[@StuccoPlastering]

Morning dnn187, man, thats such an easy question, NO. I have tried this many times with diamond blades on my grinders, what happens is the dust from the grinder being used travels to every house within 200 feet and makes a tremendous mess, I have even tried this with a shop vacuum to try and catch the dust. Even if a company made a grinder that could catch 100% of the dust it would not be faster or more effective than the method Jason shows in this video, if it was, I would be showing that. keep in mind I'm not rich, but can afford any tool known to man for the purpose of saving time and money. Cheers, and have a Fantastic New Year! Kirk Giordano’s DIY plastering tips

[@JorgeInTheTube]

Thanks for all the knowledge you share. Quick question, I don't know why I keep thinking that you at some point--maybe in another video--that you used a sawsall with a special bit to scrape the old stucco or bad stucco?? Or is that a special tool and special bit? if so, what are they called or where can I find them? I need to do some cleaning in the front of the house. And you are too far to have come over to do it... :-P

[@StuccoPlastering]

Howdy Jorge dude, your right it was a saw all or reciprocating saw, we just installed a scrapper bit. sold on amazon or Home depot Live long and Plaster Teaching the world how to plaster one Video at a time

[@darwinbodero7872]

Is mapei multisurface bonding primer (prim grip) suitable for this?

[@StuccoPlastering]

No idea as I have not used it, so I googled it for you. The Multi-Surface Bonding Primer effectively bonds to cement-based mortars, tile adhesives and self-leveling underlayments.🤔

[@terrymeyers679]

Hey Kirk, what electric chipper and electric stucco breakout tools are you using?

[@StuccoPlastering]

Good evening terry, it's called a "Bosch hammer bulldog," you can clink on the Amazon link above, it sells for cheaper from Amazon than going to the store to purchase. Plus it's delived to your front door, make a fella downright lazy but happy. Best wishes, Mastering Plastering for the beginner’s to the experts

[@Puda]

Ouch! I must admit that my patches look much better! Curious though as I am using a pre mixed one and they don’t recommend adding extra caulking first. Would you say that caulking first is best?

[@StuccoPlastering]

Hello again Puda; that's because you're a natural in stucco; you may not know this yet. In this video, absolutely, however, I cant see what you have to advise. Caulking can't hurt anything if it's on the wall sealing cracks. Your bonding agent will seal it in any way. FYI, I have never heard of pre-mixed stucco? What product are you referring to? 🥂

[@Puda]

@@StuccoPlastering that’s the DAP one :) very easy! Worked well so far ;)

[@StuccoPlastering]

@@Puda Excellenta.🥂

[@jayc4715]

My man Kirk didnt do that garbage!

[@StuccoPlastering]

Evening Jay, not while awake anyway. Sound advice from the plastering messengers of youtube

[@rogerfossette2097]

Outside of putting on a bonding agent I wat to testure my drywall like the video with first color plaster second paint.?? no probles or desaster lol

[@StuccoPlastering]

This can easily be done. 😉

[@computertips2013andbeyond]

Hey Kirk, can you look at this shirt clip and give me your recommendation ? this is this worst part of my house and I'm wondering if I need to do what you did here in this video. would really appreciate your advice.

[@StuccoPlastering]

Howdy Computer tips dude, what shirt clip, no video came through. Perhaps e-mail me at [e-mail] so I can see what you are referring too, cheers, kirk giordano

[@computertips2013andbeyond]

+Giordano's plastering & stucco repair videos thank you for the response, I just emailed the link.

[@cmoon682]

"got a dead battery going on here", love when that happens

[@StuccoPlastering]

Howdy Moon dude, that what makes life interesting and special Live long and plaster how to repair their number 1 investment

[@216trixie]

I can't comprehend how you can work without knee pads.

[@StuccoPlastering]

Howdy Trixie, the concrete never seemed to bother my knees. Hence, no need for them. Bringing peace, love, and harmony back into the world of plastering. The University of plastering by Kirk and Jason Giordano

[@jonatansotelo979]

Your the best

[@StuccoPlastering]

Howdy Jonatan, you, my friend have a way with words, thank you. Bringing to all the most complete plastering encyclopedia ever created in the world online. By the plastering messengers of KZbin. With well over 850 free self-help videos 🎭 👀💃 Kirk and Jason Giordano Plastering

[@TrowelWalls]

love it

[@StuccoPlastering]

Good evening Trowel wall Dude. Thank you, my friend. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@gilbertvelazquez1254]

Like you said easy lemon squeezy you C goes something like that

[@StuccoPlastering]

Morning Gil Velazquez, exzackory, Cheers, kirk giordano

[@dannyv6399]

Ur a bad ass dude.

[@StuccoPlastering]

Howdy Danny, thank you, love your style. Bringing to all the most complete plastering encyclopedia ever created in the world online. By the plastering messengers of KZbin. With well over 850 free self-help videos 🎭 👀💃 Kirk and Jason Giordano Plastering

[@akoznasovajusername]

5:01 It sounds like an atomic bomb exploded!!!

[@StuccoPlastering]

Evening Dino, stranger things have happened. Sound advice from the plastering messengers of youtube

[@aaronbrown3573]

You da man.

[@StuccoPlastering]

Evening Aaron, thank you

[@matdomm]

🐐🐐🐐

[@StuccoPlastering]

🍺

[@darkteenpaint5752]

smash the like button nerds

[@StuccoPlastering]

Good evening Dark Teen Dude, LOL, and thank you.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering

[@shaneresuggan4548]

Should have joined the patches,traps for beginners. 😂

[@StuccoPlastering]

Good Evening Shane, thanks for the tip. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@palpal8058]

Oh so that's how u sand it down when you mess up... 😢

[@StuccoPlastering]

Good evening, this is just one way😏

[@palpal8058]

@@StuccoPlastering 😳 than there's a lot to learn ahead for us all

[@andretait2817]

Someone should re plaster that whole house. It looks like shit. Texture sounds like an excuse for bad plastering

[@StuccoPlastering]

Howdy Andre Dude, easy big daddy. Your transmission goes in your car you don't put a new engine plus tranny in, do you? Most folks don't have that kind of dough to say, "just replace the whole home." Bringing to all the most complete plastering encyclopedia ever created in the world online. By the plastering messengers of KZbin. With well over 850 free self-help videos 🎭 👀💃 Kirk and Jason Giordano Plastering

[@c.w2214]

id pay him to just finish coat the whole thing. duh

[@StuccoPlastering]

Good Evening CW, that could have been an option. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZbin with over 800 videos.

[@c.w2214]

@@StuccoPlastering you know this info you give out may be in the cosmos for eternity. The universe needs plastering too. God will always take care of you.