Banggood Carbide Lathe Tool Set Review

[@BentTreeFarmPa]

Thank you sir, I bought the cut off tool from your video and just got it, I love it for the price! Keep it up, I trust your honest review style.

[@cgoodwin2875]

Very helpful review, thanks John. I have been after a set of these and as it is for the same lathe you cant get a better heads-up than that. Set on order.

[@shawnmrfixitlee6478]

I have had this set for a year now , I LOVE THEM ! Great test John ..

[@jimsvideos7201]

Good on you for putting these through their paces; they sound like a good option.

[@tinker5291]

Splendid video John! I like your honest reviews and look forward to each one. You usually review tools from Bang Good which is lovely place to acquire tooling at a good price which is necessary for us hobby machinists. Thanx

[@aronmarcel8140]

I dont mean to be off topic but does anybody know a tool to get back into an Instagram account?? I somehow lost the login password. I would appreciate any help you can give me.

[@kolefabian6264]

@Aron Marcel instablaster :)

[@aronmarcel8140]

@Kole Fabian i really appreciate your reply. I found the site on google and im in the hacking process now. Looks like it's gonna take quite some time so I will get back to you later with my results.

[@aronmarcel8140]

@Kole Fabian it worked and I now got access to my account again. I am so happy:D Thanks so much you really help me out :D

[@kolefabian6264]

@Aron Marcel Glad I could help =)

[@messenger8279]

Thanks John for that. I have ordered the parting tool as I was very impressed by previous videos. I have a lot of problems with my current HSS tooling.

[@kentuckytrapper780]

Great review John, I've been buying some tooling from banggood, got the sixteen mill set very satisfied with the performance.

[@CruiserMac]

I like that they all use the same inserts, looks like good value for the money.

[@medvedmedvedoff4803]

This boring bar is so good. I've been using this for a couple of years now.

[@jimpomeroy9451]

Great review John. I purchased the 12mm set and they work very well.

[@csimeonides]

You were giving some thick cuts, boy! the tool works great. I did not see any fractures or worn edges. Great tool, thanks

[@atowning]

Great video John, I use the same tools and have got on well with them I even used a dcmt070204 insert to cut a 6 tpi whitworth thread and it worked fine.

[@atowning]

Thanks Craig, I should have a video of threading using thoes inserts early August. I would like to find a boring bar with the right alignment of the insert so I can cut internal threads too

[@noelhenderson700]

I've used TCMT triangular inserts to cut large threads. I don't see any reason they wouldn't do fine threads too. Probably more accurate than grinding my own HSS threading tool.

[@jusb1066]

always a real and honest review from you john

[@CliffsShed]

Nice video as usual John, I think they takes a bit of beating for the money, and you can afford a bit of variety to find what suits you! Bought some of the Cobalt drill bits as well and am well impressed with them, think I should get some more!

[@JamesDedmon]

John with our lathes the carbide grade isn’t as critical. Actually we can’t get the most out of some of the newer grades. The inexpensive Chinese inserts work fine for us. I some bangood cut off inserts and they perform well.

[@thepisteoffice]

I've got the same set but with 12mm shanks and they're excellent.

[@mosfet51]

Lovely video good sir. I am very happy with my purchase.

[@MaturePatriot]

Fortnight, that's two weeks for our American young people. LOL Thanks John, I recently purchased the same set from Banggood. I haven't had a chance to use them as of yet. This shows me I made a pretty good choice. Great tool review video. See you this weekend, Good Lord willing.

[@ollyk22]

Yes they do 10's. I have this set in 10 and it is ok. WHy are they all right hand though?

[@goldeee666]

just ordered these. many thanks professor boost

[@jamesroddy2723]

Great video, quick question you link two sets of cutter tips what’s the difference between them?

[@jusb1066]

good question, theres about 2 quids difference in price, but the same specs exactly between them, perhaps its just two suppliers and thus their pricing

[@RyanWeishalla]

Could also be different coatings on them. There isn't much detail on each that I see.

[@SeanBZA]

John, ever used industrial plastics to make bushes? I like Vesonite, as it is both a lot cheaper than brass or bronze, and also is a much better material in slow and dry applications. You do need sharp tooling though for it, those look like some perfectly good ones to use on it as well.

[@colinmartin2921]

Great video, thanks.

[@denniswilliams8747]

I bought some smaller insert tools. The insert is about 1/4" on a side. I found the inserts chipped easily. The larger stuff does better, some still pretty poor Be prepared to try better inserts if you can find them Thanks

[@olhemi1]

Nice job John

[@johnstrange6799]

Hey John, you link two inserts... are they the same? Do I need both? Thanks.

[@johnhili8664]

Hi John good review but what type of material are u cutting is it by any chance aluminum? If so that could be cut even with a penknife:-))))))))

[@doubleboost]

As I said in the video Bright steel EN8 steel Stainless steel Bronze no Alluminium

[@johnhili8664]

Thank you for the reply sorry sometimes I do not understand as you speak in a Yorkshire or Welsh dialect:-)) Two weeks ago I had a chap visiting my stationary engine collection here in Malta he is from Yorkshire had a bit of a problem to communicate with his accent!!!!!!!

[@oldcomps]

As a point of interest I purchased these based on the review and have to say great value for money BUT unfortunately one of the holders was faulty and the screw will not go in when the tip is in place, fair enough any supplier can have a problem but it’s how they resolve the issue that matters, I contacted Banggood using their system supplying the order details the part number of the faulty item a description of the fault and a photo showing the tip fitted and clearly showing the threaded hole of the holder through the tip so they could see the edge of the treaded hole was out of line with the hole in the tip therefore the thread won’t start, everything I would have expected them to require. The reply was can you supply the part number of the faulty item a description of the fault and a photo showing the fault and a video. I replied saying I had already done this and all I received was an email asking for a photo???? I’m not saying I would never buy from Banggood again but I’ll probably buy in the UK in future it’s easier and everything Banggood supply you can get on UK sites. I’m not that bothered as the rest of the items were worth more than the price I paid, and my time is more Precious to me than the hassle of trying to get it resolved. but that’s not the point.

[@markcnc]

like you said .... Nothin wrong with that.

[@steveclark..]

I'd buy a set if they did them in 8mm holders,...I think that's the largest size my little lathe can take.

[@paulmorrey733]

Cheers John

[@ياربيارب-ص1ظ]

Very cool

[@raymondsteele4142]

Nice