Here are the links to the products that I used in this video: Idash Super Gauge: amzn.to/36b8Vas Idash Data Monster: amzn.to/3xsgqpD Idash Secondary Gauges: amzn.to/3xeQPjv Idash Universal Mount: amzn.to/3xrvweE Trim Removal Tools: amzn.to/3huP8YJ Banks Power KZbin Channel: kzbin.info Block8Head Pods: facebook.com/Block8head The guy's name is Ben. You have to send him a FB message to get pricing. You will then send him a Paypal for the amount he quoted to the email address he gives you. I hope your pod comes quicker than mine. He originally quoted 3-5 weeks for delivery. I know that he has people that have been waiting over 6 months for one of his pods. If you do not keep on top of him he will forget about you. Don't harass him but you need to keep in touch to get one of his pods. If it takes a while to get your pod, don't say I didn't warn you... My Amazon Store: www.amazon.com/shop/repairgeek Help support the channel, buy using my Amazon links As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
@bankspower3 жыл бұрын
Thank you for the honest review. Sorry about the delayed release of the Derringer tuner for the 2.8. The reason for the delay is that in order command the horsepower that we want, FRP and MAP aren't enough. We have to add timing and adjust injector pulsewidth. Both of these features take a lot of time to develop... more time than it took to get your Block8Head pod. Haha.
@justin36632 жыл бұрын
@Banks Power any idea when it will finally come out?
@RepairGeek2 жыл бұрын
@@justin3663 the last thing that I've heard from them the chip shortage is causing issues. I have nothing on an ETA. When the 2.8 Derringer comes out I will have a video about it.
@robanders7650 Жыл бұрын
@@RepairGeek thanks for all your vids on Colorado's. Had mine for a little over a month and your vids have been a great source of information for me. Just ordered a Banks idash, seen them for a while and wanted one on previous trucks. Sure enough when googling about it for a Colorado you have a vid for it and helped sell me on it!
@patrickrose16299 ай бұрын
Great review! - How can I get MPG fuel economy, using the iDash?
@Bpf18938 ай бұрын
I bought a pod off etsy and i had it at my door four days later. It’s 3D printed but it looks like good quality and has great reviews.
@deltabravo12573 жыл бұрын
Like you mention, high and low warnings are a must! I also have a 6.6L Duramax (2009 3500HD Dually) which I haul a truck camper with. Yesterday I was driving across WA state in 90+ ambient temps. The ECT and EGTs were running high, when the alarms go off at my "high" set points, I back off the throttle. On that truck I use the Edge Insight CTS2.
@RepairGeek3 жыл бұрын
Exactly most trucks have those warnings built in but the thresholds are way too high. My Colorado will pop a transmission temperature warning at 260 degrees. If you ever got it that hot the damage has been done already.
@deltabravo12573 жыл бұрын
I've had the iDash since April when I bought my 2.8 Colorado. I want that gauge pod too, but the seller is impossible to get in touch with to order it, plus his website doesn't give any info on ordering it for a Colorado/Canyon. I've read other people having the same experience as you had - they contact him, he says "it's shipping tomorrow" but never shows up until weeks later.
@snowpatrol685 Жыл бұрын
great video. i just installed mine and was wondering how to set it up. you answered a lot of questions for me. thank you
@dustindavies81282 жыл бұрын
I ordered one and it did not come with the OBD2 plug in play. Make sure you order the right one like I did not.
@LU-D1GITAL2 жыл бұрын
I have a 2.8 I want all the stuff you can make BANKS we love our 2.8s we all live in a log cabin with our 2.8s
@spiridondimaris4653 жыл бұрын
GOOD VIDEO Geek LITTLE pain in the but waiting for 4 month's sucks good job
@TheBeatenPaths3 жыл бұрын
Been watching Gayle Banks ever since they teamed up with Amsoil.
@RepairGeek3 жыл бұрын
Yeah I'm not going to lie, the diff cover series got me hooked on their channel. I've went back and watched a lot of the old videos and those are good as well.
@treyjuice422Ай бұрын
Does the dash super gauge 1.8 for $300 still allow you to activate regen manually ??
@RepairGeekАй бұрын
Yes.
@raysutton591 Жыл бұрын
I can't find oil psi or trans temp for my 08 tbss
@big99144 ай бұрын
Does your Colorado def parameter only stay between 40-49%? I’ve filled it up full to the point it overfills and it’s never moved the percentage
@RepairGeek4 ай бұрын
Yes the sending unit has a max reading of about 48%. That is why the dash says DEF level "OK". Once it drops below about 45% you can see the actual reading.
@big99142 ай бұрын
@@RepairGeekdo you think replacing the def pump with a 2020 model give me a full percentage? Since they have a percentage showing all the time.
@skmetal7 Жыл бұрын
Tried installing this on my Subaru BRZ but it won't turn on. I know all subarus are canbus cars. I'm not really sure where to go from here.
@skmetal7 Жыл бұрын
turns out, my obd 2 port has some bad pins.
@sonolaaccordeon82882 жыл бұрын
Good video bro. Fuel pressure is not read is it?
@RepairGeek2 жыл бұрын
It's in there you just need to select it.
@hardsellcomixreviews751421 күн бұрын
Why can’t you run on 2008 or older vehicles got ob2 in 1996
@RepairGeek19 күн бұрын
Pre 2008 is not CAN. Control Area Network
@hardsellcomixreviews751418 күн бұрын
@@RepairGeek Ok thanks I am just extra confused because they showed the Putting one in Brian Shaws excursion
@RepairGeek17 күн бұрын
Some of Banks's tuning devices are able to convert the signal for the Idash. So something like an old 6 gun module for a 7.3/6.0 truck will intercept all the PCM's signals and make them readable by the Idash by plugging the Idash directly into the 6 gun rather than the OBD port. An Idash won't work without a 6 gun on a truck that old.
@connorbelfield70002 жыл бұрын
Do you have to install a probe to monitor egts for the 2.8?
@RepairGeek2 жыл бұрын
No. EGR 1/1 is the EGT pid.
@peted23002 жыл бұрын
Does this unit tell when I need to regen my diesel colorado? Or what percentage my regen is at?
@RepairGeek2 жыл бұрын
Yes it will. That is what I use mine for as well. You can also force a regen when you want to.
@peted23002 жыл бұрын
@@RepairGeek Brilliant. Thanks, looks like I got me a new gauge. Now if only I can find that pod that fits my defrost vent.
@truckinman86 Жыл бұрын
You can trigger both a driving regen and a parked regen with the Super Gauge/Data Monster.
@stay4theride Жыл бұрын
Can it tell you what gear you are in?
@RepairGeek Жыл бұрын
Yes, and if the torque converter is locked.
@seanfinnie36713 жыл бұрын
Dawn redwood bonsi
@ddrowdy7666 Жыл бұрын
Worst gauge EVER, too damn small to read while driving, completely useless.
@RepairGeek Жыл бұрын
Showing 8 parameters on 1 screen (the max #) the numbers on the Idash are the same size as the numbers on my speedo and tach.