Taking out the 421cc cub to build a 521cc Super Cub
Пікірлер: 28
@peterk5460 Жыл бұрын
🐐 Couldn't be happier with the 4mil stock rebuild you did for me this past summer 🙌
@mccafferycustoms5091 Жыл бұрын
When I watch these videos I imagine how the glamis dunes used to be in the 80’s. Bet it was awesome. Hey Kevin. I don’t know if you do your own machine work but I would love to see the process of boring/honing some cylinders. Trenching some cases. Ya know. Normal banshee machine work. A lot of guys don’t like giving information out to the public about these engines but it seems like you don’t mind. That’s a good thing for all of us younger guys that don’t have as much time with em as you do. Thanks Kevin.
@Eric_661 Жыл бұрын
I was like that looks like mine 😂 that 421 ran good over 100+ hrs
@austenpadilla7852 Жыл бұрын
Dang man I heard since you made the video on my 521 this is the new hot ticket 😉
@chihuahuaverde425 Жыл бұрын
Nice work!
@Speed295 Жыл бұрын
What kind of hp are we talking about whit this 521cc kit? Wery nice jobb and a super informant video THX from Sweden
@herrjugsracing7816 Жыл бұрын
This one 130HP
@WestCoastRoller Жыл бұрын
Thanks for video..been thinking of doing same upgrade with my 4mil. Question...I'm going from sea level to 6000 ft. Do I need different dome size or can i just rejet? Have 24cc now. Pump gas.
@herrjugsracing7816 Жыл бұрын
Yes you do. My guess without doing the math would be 21cc.
@WestCoastRoller Жыл бұрын
@@herrjugsracing7816 thanks
@Eric_661 Жыл бұрын
I had the adjustment wrong on the clutch blow up 3 of them till I figure out I was doing it wrong
@66garagecilacap3 ай бұрын
@herrjugsracing7816 awesome video, I'm building a yammagamma (an RG250 gamma chassis with an RD350ypvs) is 421cc the biggest you can go without machining the crankcase? and what kit would you recommend for a street bike application?
@herrjugsracing78163 ай бұрын
That is correct. I like the 421 cub or cheaper alternative do the 421 Athena. m.kzbin.info/www/bejne/api4Z4Z9i6aAetk&pp=ygUSQmFuc2hlZSA0MjEgQXRoZW5h
@66garagecilacap3 ай бұрын
@@herrjugsracing7816 thanks!
@imme3932 Жыл бұрын
I have a question can you fit blaster pistons in banshee cylinders (jugs) ? And if so what other work would I have to do?? @herjugsracing
@herrjugsracing7816 Жыл бұрын
You only use blaster pistons on stock cylinders for 66mm bore and above on 58x115 stroke cranks.
@chadwems Жыл бұрын
I got a fresh pro mod done by Tyson racing with new shift forks. He said use a stock un modded shift star. I feel it doesnt shift as smooth as it should. Do you recommend switching to a modded shift star? i already have modded shift detent and shift shaft.
@herrjugsracing7816 Жыл бұрын
As long as the spring rate is stock I would run a modded star.
@jj-hf8jy Жыл бұрын
First!
@tsar-bomba24137 ай бұрын
Did you torque all your bolts and nuts off camera?
@herrjugsracing78167 ай бұрын
Yes, the videos are too long as it is. I stick the torque info in every video for reference.
@Speed295 Жыл бұрын
Can you 421 or 521 sets whitout nicasil I prefeer real steelsleevs. sorry for the spelling.
@herrjugsracing7816 Жыл бұрын
You can get 68mm iron sleeves for the 421 and I'm sure you can find other sizes too.
@travislawson1185 Жыл бұрын
Just curious what the benefit of the trans promod?
@herrjugsracing7816 Жыл бұрын
Helps on shifting when the horse power goes up. At a certain point the shifting slows way down and becomes frustrating.
@travislawson1185 Жыл бұрын
@@herrjugsracing7816 thank you for the explanation. I mostly build vintage street and some vintage race bikes and, over the last 20+ years, I have built about a dozen modded RD350s and a couple RZ350s but I hadn't seen anyone mill off the gear sets. It makes perfect sense I guess for drag racing a quad but I doubt I would see the benefit on a street motor.
@geoffmcwiggan28147 ай бұрын
What is the cost of one of these engines complete? 👍🥃🇦🇺
@herrjugsracing78167 ай бұрын
It changes as time marches forward. Check website or contact me for prices.