Bark River Knife & Tool......factory tour 2018 !

[@oldskoolhoss7534]

Bark River 👍 has my vote. I will proudly spend my hard earned bucks on an all american family owned shop that builds top notch blades! Love it

[@Bushradical]

awesome knives!

[@ThrashRoC]

bought my first Bark River Knive today ..The Aurora II in CPM 3v /Amboina Burl and Brass Pins ..HOLY Ghost !! It has IMMEDIATELY become my favorite knife .. ABSOLUTELY top quality. Took two years and then I wanted the normal Aurora .. COMPLETELY sold out .. Then I dared to buy the slightly longer Aurora II and ... BABY !!! I just soaked the knife sheath with leather care and then REALLY soaked with Snow Seal (Sheat heated in the oven and soaked with the stuff .. The leather was GREED for it (pretty dry) The best knife I will ever have And that's what I say as a German, where there are also VERY good knife brands .. But NO Bark River .. I will only sharpen this splendid specimen by hand on the stone.

[@1mataleo1]

I did the same thing. I wanted the Aurora, but since they were sold out, I took a chance and bought the Aurora 2. Now that I have it, I’m actually glad it worked out that way. I never would have bought the 2 otherwise, as I thought it was too long, but it handles great. I love it and I’m glad I went with the Aurora 2. Everything about it exceeded my expectations

[@gosmoothgolight7567]

I've lost count of how many times I've re-watched this one, Dave ... Mike Stewart is fun to watch, too! I have a made-to-order Little Creek I should be getting delivered sometime next week. Super interview and tour! Thanks again ... God Bless you and yours

[@Bushradical]

Glad you enjoyed it

[@kriskabin]

I bought a couple Barkies because of this good interview. What M.Stewart said at the 10:00 mark really impressed me. 👏 💭 Finally, a man who values & respects women! My Bark River Scout & Cub are gorgeous. Perfect works of art & wicked sharp! Their warranty & "spa treatment " on their knives really sold me too. Well done, BRN!

[@randomguyfromtexas1185]

I can honestly say I really enjoyed this video and after listening to Mike speak about about his company and their knife making process, from beginning to final finish and QC, I can say I want a Bark River knife more than ever. GREAT VIDEO!!!!!!

[@Pencil-b4m]

I love Mike Stewart. He makes some of the best semi-production knives in the industry and makes himself extremely available to his customers. It says a lot when the President of the company gives you the tours too.Its great to know another Stewart will be keeping the company going long into the future also.

[@OSAbsolam]

What a great American company with a great owner. Small simple family run business. No fancy factory needed. I love it.

[@edgrigsby8610]

This vid sold me on Bark River! I was debating between Bark River and a different company. Glad you posted this video. I'm really excited about the convex grind. Wow, what a company. Proud to purchase a knife from them!

[@flamaest]

Probably some of the most beautiful knives ever made.

[@bigbill74scots]

I say this as a Brit; this is why I proudly by Bark River. Good honest high quality workmanship made by good honest high quality people. Much love and respect from your cousins here this side of the pond.

[@Bushradical]

Right on. Thanks S.O.

[@unfi6798]

One of the best vid we've seen matey. Thank you Mr. & Mrs. Bushradical. Cowabunga.!

[@ryanadam1153]

I had a candadian camp knife with a beautiful burl handle chip on the edge in subzero temps. They no longer produced the knife probably due to the thin geometry that attributed to the edge failing. They made me a new golok with desert ironwood and black liners as a free replacement. Bark river is about their quality knives and ill always have a spot in my heart for bark river knives.

[@Bushradical]

right on. Good knives

[@cuttheknot4781]

This company has not changed in forever. The same down to earth awesome Americans that represent us all so well. I wish they were my neighbors.

[@Bushradical]

right on

[@mryan3123]

I've carried a Bark River Bravo 1 on all my camping and hunting trips for the last 8 years. To say I'm hard on gear is an understatement and this knife has taken everything I've thrown at it. If you are waffling about getting one of the Bark River knives because of the cost, remember you get what you pay for.

[@bmack1776]

This makes me REALLY want a Bark River knife.

[@grumpyoldwizard]

I have 3 of these, two Bravo 1’s and one Bravo 2. I love them both. Thanks for the tour!

[@Bushradical]

I don't own one, but they seem awesome.

[@Beaverbush1969]

You have three of them and u love them both?😂

[@b80-s9i]

That was an awesome, organic factory tour!

[@Bushradical]

I could have spent the day, and not seen it all

[@b80-s9i]

Its 3 years later now, and am wondering if you might go back and see what has changed!? God bless🙏

[@iiscd5970]

After seeing this video I'm sold on Bark River. Seem like cool people.

[@Bushradical]

Its a pretty cool group of people

[@24allnightmike]

this place just gets me soooo jacked up in a good way I LOVE THIS PLACE made in the USA still holds true here

[@Bushradical]

right on.

[@Myn6211]

Really awesome tour. You and Brooke have given me a true appreciation for the quality of the knives Bark River Knife company makes.

[@Bushradical]

Thanks. It was impressive seeing the process.

[@DannyWalker1949]

What A Company............Mike thoroughly impressed me. Thanks to both you Dave and to Brook for your time to show us this Company. I will try to get an Good Knife ordered. My knifes are just so, so, so to speak.

[@Bushradical]

My knives are just so-so too! I do have an LT wright knife that LT gave me....its a great knife. I don't own a bark river knife though. But they o look awesome.

[@mikeb6981]

Great video, bark river knives are top self, i own several and feel they put out the best knives money can buy thats my opinion. Glad to see a video to show people a great American product .

[@Bushradical]

Thanks Mike. They are a really cool company.

[@theflyinggearman3128]

Thanks for the shop tour. I am proud to own one of their knives and respect the work and effort put in by Mike and his guys.

[@Bushradical]

right on

[@alholsbo5934]

That is the coolest video I’ve seen in a looooong time👍👍

[@Bushradical]

Thanks

[@Tier1GearEDCReviews]

I can't lie... I love this video. Gives you a whole new respect for the brand. I've probably ran across it and watched 10 times in 2 years. Lol 🍻

[@Bushradical]

Thanks ! It was fun to shoot....I havent been back there since so I'm glad I got to shoot it

[@Tier1GearEDCReviews]

@@Bushradical I bet it was.. I'd love to be able to see all that in person. This is what made me pull the trigger on The Donnybrook. Now I have 4 lmao 🍻

[@Bushradical]

awesome

[@jiffywartbustle2348]

Excellent tour of what is quickly becoming my favorite knife and tool company! What a great opportunity!

[@Bushradical]

We had a great time.

[@soisitimpossible]

Lucky folks, I'm particularly find of a good knife. I would have thoroughly enjoyed a tour like that in person. Thanks for letting me in on your tour!

[@Bushradical]

It was a cool time. Mike Stewart, and Derrick Bohn really opened my eyes to the industry. I may get into knife making too. Super cool folks.

[@alanwilliams5836]

I've been through a tour with Mike... maybe 4 years ago. Bark River is an all around awesome company. I get tired of scandi grind knives. They have their purpose... but a great convex ground knife that requires little to no care is at the top for me. My very first influence to Bark River was our good friend at virtuovice on youtube. This guy really knows knives... I'm still subscribed to his channel. Thanks for sharing the tour video Dave!

[@Bushradical]

Thanks Alan, glad you enjoyed it.

[@markstribrny3456]

Just picked up one of your PSK knives and I love it, it is a great little knife very handy...I have several of your knifes (north country, snowyriver and bravo) the quility is first rate.....thank you Mark J Stribrny/Livonia, MI

[@zRockin1]

Hi Dave, very cool to see how they make their knives, thanks for sharing, Rock On!

[@Bushradical]

Thanks Z!

[@joycebarnett5813]

Another great video. It is wonderful to have an American company do a super job and fulfill the orders as ordered. Great looking knives. Thanks for sharing. Stay safe and happy trails.

[@Bushradical]

We were really impressed with BRKT.

[@troydodson4837]

Been eyeballing one of their knives for a few months now.. this video made me order, american made, done by hand where needed, quality product.. love it.

[@Bushradical]

They look like good knives for sure.

[@ToxicityAssured]

I have heard a lot of controversy around this company over the years. I never looked too much into it because I'm a folding knife guy. I finally watched this and I am shocked. Mike is a totally normal human. I love how he was dressed and appeared. It's great to see someone being so successful (40,000+ knives a year) and still be himself. The whole company is ran as a commune and workers are talented and respected. I just don't see how this could be fake. Everything seems authentic. I will probably pick one of these up sometime just to say "thanks for being awesome" to a great company.

[@Bushradical]

Actually its an OLD school type of place. Lot of people smoking inside, solid American made machines.....its kind of a throw back place. They are the real thing, and I dont even own a Bark River knife.

[@dougvuillemot8670]

I have 3 plus bark river knives. All being made in last 5 years. All are really nice knives.

[@jeffsmith6441]

This was awesome! I've wanted a Bark River blade for a while and now I want one even more! Lol!

[@Bushradical]

They looked pretty nice.

[@ssunfish]

Which one do you want?

[@kevinkrekels9780]

Great business! I received my bushcrafter 1 this week and it’s awesome! Great quality fantastic handle. I’m very impressed with the quality of this knife!

[@Bushradical]

Awesome

[@justincase4382]

Right on, thanks This was a good 20 mins I enjoyed

[@therealgirlinthewoods]

Awesome! Wish I woulda been there. Oh WAIT! LOL Good job catching things I didn't when my card filled up! Great tour.

[@Bushradical]

I'll arm wrestle you for your shotgun Microphone!

[@therealgirlinthewoods]

Let's just wrestle. 😍

[@gbaughman3348]

hey now none of that kinda talk around here, LOL

[@gosmoothgolight7567]

Yup ... a'nudder Radical video! Enjoyed the tour, Mr. Whipple ... enjoy da beautiful UP, eh?

[@davidmoulton5422]

Brook that what husband are for

[@JEFFALLENOFFTHEGRIDIRON]

Thanks for the Tour Dave. You certainly shed some light on the behind the scenes of their operation. I've been enlightened to this knife brand and respect the quality, work ethic, and 'grind' behind their knife making efforts. Bring on Christmas.

[@Bushradical]

right on.

[@AnthonyJones-zo7dy]

AWESOME video... thanks for doing this! Yes, I have quite a few of them... they are 'addictive' All the VERY BEST!

[@Bushradical]

Thanks

[@tonykendrick618]

This has made me decide to purchase a bark river ! Love the guys down to earth personality!

[@Bushradical]

Yeah Mike was a cool guy.

[@regalbowman3143]

Its nice to see a custom factory with hands on craftsmanship

[@Bushradical]

yeah it is

[@ldn0224]

I am suddenly a huge fan of Bark River

[@Bushradical]

It was a fun tour.

[@AG.Floats]

Suddenly? Every knife nut should be a huge fan.

[@pacificbushcraftandfirecra6358]

Very much enjoyed this tour... thanks for sharing.

[@Bushradical]

It was a fun day.

[@kirkhobbs9003]

Wow there Dave - what an awesome experience you got & to share that with us is amazing - thanks so much for that buddy - great job on covering Mike & his crew - holy wowsers eh - ya thats something like man oh man beautiful ; take care - safe travels & have a blessed day - kirk out

[@Bushradical]

Right on! Thanks Kirk.

[@SuperIain13]

That was very cool! Thank you for sharing this tour of an amazing knife company.

[@Bushradical]

It was pretty cool.

[@timbo4374]

Cool video! Just so happens, I have 2 Bark Rivers in the mail and on their way to me as I watch this...I just LOVE my Barkies!

[@Bushradical]

Let me know what you think....I actually don't own a Bark River Knife. ( We have 2 teenage kids) so funds are always tight.

[@OriginalKaw4Life]

Really glad to see a small company doing so well. Definitely something we need more of in this country. With that said so sad to see the guy with black face knowing how much of that grit is now in his lungs. Along with none of the grinders having any dust collection. 😞

[@cherylt8590]

This tour was just awesome, ty for sharing ,great video 😊💙👍...

[@Bushradical]

We're glad you liked it !

[@MTwoodsrunner]

Great tour guy n gal....polishing is one of the most dangerous steps in building a knife...i have the scars to prove it....Mike seems like an awesome dude....Thanks for bringing this to us Brooke n David....awesome stuff!...almost goes without saying...woods

[@Bushradical]

Hey Woods! You a knife maker too? Ive never run a buffer but my dad spent 30 years in a buffing and polishing shop with 440 jacks. They looked and sounded real scary to me!

[@MTwoodsrunner]

yup, twenty odd years....them buffers can take a knife right out of a fellers hands lickity split and send it in all sorts of directions...takes a steady hand, the correct angle and concentration...woods

[@Bushradical]

Whats the best way to approach buffing? Just do it and learn that way? The buffer does seem like a tool to respect!

[@MTwoodsrunner]

Turn on machine, apply buffing compound, Holding knife in both hands (one hand firmly holds knife handle while other hand merely supports the blade.) cutting edge down, firmly apply lower half of blade to wheel moving steadily hilt to tip...turn blade cutting edge up and repeat above....be sure and keep the top of the blade tilted towards you and away from the wheel NEVERRRR work above center line of buffing wheel!!!...below center line is correct. Always use two hands Never polish a 90 degree angle on a parallel line such as on the spine, but rather turn blade over , tilt blade point down and draw blade up and towards you...remember, a soft wheel will seize and rip a blade from your hand more easily than a firm wheel...finally, have a quenching tank nearby so that you can cool the blade as needed.....if the steel is too hot to touch, its too hot. of course as you know, the best way to learn is by doing...taker easy amigo and safe travels!...woods

[@Bushradical]

Thanks Woods!

[@uuncensored]

Great video. It’s very nice of bark river to show all the behind the scenes stuff

[@Bushradical]

Those guys are great at what they do.

[@ThrashRoC]

Have become today the Bark River Aurora II ...CPM 3V ...MAN its the Best Knive i´ve ever had .. So DAMM Good Quality !!!

[@milliewilkie1969]

i love watching videos like these

[@fumastertoo]

That is a sweet setup, fantastic American made knife company! I'd love to see this shop in person, very nice!

[@magadog21]

thank you very much for the tour

[@cclemoyne4033]

I like this company. Family owned and keeping it real. Now its time to save up and order one of these great knives for my camping trips. Cheers, Bark River A cut above the rest

[@Bushradical]

Thanks CC.

[@ssunfish]

Have gun at camp and stay safe!

[@lapualapua1248]

A great knife company 10/10 for the vid guys 👌🏻

[@Bushradical]

Thanks!!!

[@The1Ox]

Sure enjoyed the tour of the BRKT company! Blessings!!!

[@Bushradical]

Thanks!

[@lukaspatty6431]

Mike is a genuine guy!

[@Bushradical]

He seemed like a real cool guy.

[@debbiebissel50]

EXCELLENT looking knives.Thank You Jake Bissel.

[@Bushradical]

Who?

[@bushnut8305]

I've had a few Bark Rivers over the years. Hands down the best production knives on the market. just can't beat the A2.

[@Bushradical]

They really seam like great knives. Ive never owned one, so I can't comment, but I was very impressed with the factory.

[@bigbill74scots]

My Bravo 2 in CPM3V is just a sweetheart. Thing is with Bark River though, you can't help but buy another...then another...😁👍

[@williamprendergast6510]

I received my first Bark River knife a Gunny in CPM3V.My son who lives in Kentucky ordered it from Amazon ,cost 300 dollars worth every cent,on the paper test the weight of the knife pushes the edge through the paper.Big Scandinavian knives fan eg.Helle,Mora,Martini,but my next few knives are going to be Bark River.Bravo next in A2 steel.Stay safe.Great video.

[@Bushradical]

Right on

[@lv4235]

Great inside vid. Love my Barkies!

[@Bushradical]

Thanks Lucel

[@Glockenstein0869]

I have 6 Bark River Knives and a collection of over 150 other knives. The reason I like BRKs so much is because of their excellent convex blade geometry and heat treatment. If you want a bulletproof blade then get a Bark River.

[@sjbrakke]

Great tour. Thank you!!

[@KaylynnStrain]

awesome !!!!!! that is so cool that the owner gave you the inside scoop!!

[@Bushradical]

It was fun?

[@mountainsstreams2133]

Fantastic video & thank you. I love watching Mikes KZbin’s videos “this ones in black so it’s mine” 😆 I have owned a few of their blades over the years....gunnys, bravo, fox rivers.. plus my Blackjack 125 heavy hunter(stacked leather) which is my current go to Barky for deer & the only Bark River I now own. All were outstanding dependable knives with A2 steel being my favourite for processing deer! I haven’t really been a fan of 3v type steels in the past due to A2 being so amazing at processing deer/holds up an edge after cleaning out a Sambar(large deer species) plus its just so easier to touch up. But...I probably need to try their 3v again?!? Thank you Bark River for your outstanding products 🙌🏻 I’m very interested in their new Fox Rivers EXT-2 &/or EXT-1 with the deeper blade design - this is a must have knife for me :)

[@Bushradical]

Thanks M&S!

[@sms042]

Thanks for the video tour.....I'm in Michigan and I've just taken notice of this brand.

[@Bushradical]

I don't own one, but They seem like great knives.

[@jlastre]

For about three years I was on the fence about getting a Bark River Bravo 1 with ramp. Part of it was I couldn’t make out the weird drama some had against Bark River. But I pulled the trigger this year. Part of the reason I bought one, I hate to admit it, was they made a few with a handle that GITD. Have to say I couldn’t be happier. It is definitely a “survival” knife in that is is a thick bar of steel with an edge. Plus it GITD really well when hit with UV.

[@Bushradical]

right on

[@backwoods_barbarian4134]

Very cool! They seem like good people who really take care of their customers.

[@Bushradical]

Yeah, it was a fun tour.

[@tinadunaway1737]

AWESOME , BEAUTIFUL KNIVES

[@MrVegaslive]

Awesome. What sold me to purchase my 1st BK was a photo of the actual knife I purchased. Would be nice if they would also include the backside of the scale as well. The top and bottom might be asking little much when no liners are involved. But, it would really be nice to see the whole knife. Maybe just for any that are a bit higher end varieties. Of course wouldn't need both sides of Mike's personal black micarta ones...

[@MegaSergey1989]

absolutely awesome! Would love to see you guys start making folders. thanks for the video

[@Bushradical]

Thanks

[@ltippers7029]

I have to say, Bark River Knives are top drawer!

[@fcuk_x]

So what does it make Dark Timber knife?

[@cadeplainview634]

@@fcuk_x idk but i can never fucking get one

[@1rdgrnnr]

dave, you must have been in heaven. I love knives also. great video !!!!

[@Bushradical]

The factory was really cool, but honestly I didn't see a lot of finished knives.

[@Emtrthree]

They gave us some Alaska love!

[@charlesmontgomery5475]

I will be going there in July on the 11th from Richmond. VA! Thanks for the info, I’ve become a huge fan

[@Bushradical]

awesome, let me know how it goes

[@williamblakeley3744]

Wow super knifes . that's the best family biz to stick together & do it right .thanks for the vid..hope you got a couple samples .👍 to you two .your a grate family to ✌ from pgh pa .in the states .

[@Bushradical]

Thanks William. ( no we didn't get samples) LOL

[@iliyanpopov2573]

I have more than 35 barks love them so much ❤

[@russclewley6945]

I have a compass like that, my father gave it to me when I was ten. I am 54 now, we had matching ones. My father went missing in 2008 in Chippewa county, his compass is still with him.

[@Bushradical]

Hey Russ. Do you mean Chippewa county Mi? Man I'm sorry to hear about that.

[@cookscatapults]

Hahahaha That Was Soooooo Awesomeness....Thanks For the Journey

[@Bushradical]

Thanks

[@thriftygypsy7040]

I have known Mike since I lived in Effingham and he is a great man and genius knife maker. I own more than a hundred of his knives.

[@Bushradical]

WOW!

[@therealgirlinthewoods]

And you call yourself the Thrifty Gypsy? LOL

[@BushcraftingBogan]

I’m impressed! I’ll be looking at Bark River for my next hunting knife.

[@Bushradical]

I wish I could give you a testimonial but I dont own one

[@savagewolf1966]

That was cool went right in and seen how their knifes are made, and from my home state didn't even know about their company. their knifes look awsome.I'm buying one for sure. Love that new production knife.wow.Hand made old school,very cool.Thanks for the insight love the road trip,think you have stumbled in to a new Thing,showing what's out there in Michigan and Alaska,cheers my friends ;) great job.coutos.

[@Bushradical]

Thanks SW!

[@savagewolf1966]

Bushradical ;)

[@guns4funcajanajustin]

Awesome tour! They have a top notch crew.

[@Bushradical]

Yeah they do.

[@seff2318]

hey I’m new to your channel but I’ve been a supporter of brk for many years now. I was enamored by the amount care these guys put into their product whether it be the 100% no questions asked guarantee, the quality of materials especially the steel, their knowledge of metallurgy, the heat treat, and the VERY friendly and helpful online community (bark river facebook group) if you have a problem mike will go out of his way to talk with you and fix any issue you’re having and I mean anything lol. That being said their knives can seem a little expensive at first but if you plan to use it or sell it later on, you’re making an investment, they don’t depreciate much in value; some even go up! any way I could blather on about brk all day but if you’re thinking about getting one join the facebook group to help guide you through the thousands of knives they offer, very kind knowledgeable folks. Have a good one!

[@Bushradical]

Thanks

[@hurleystowing]

What a cool place to visit!! I love my Barkriver JX-5! 👍🏻

[@Bushradical]

It was a fun tour.

[@dsg325]

I’m sold. I NEED a Bark River or two or five.

[@Shooter11B]

Well that is one on the bucket list for sure!

[@Bushradical]

It was a lot of fun.

[@wasatchdan]

Great video! Makes me want to go to a grind-in so much.

[@Bushradical]

Thanks for the comment.

[@sunnymas2656]

Thank you for your video, and thanks for Bark River Company to make it possible. I think, it´s the amazing quality, for this business success. And sold out in advance. And this free service is great. Possible, because the factory has made is near - not in Asia etc. Also a good reason to buy this brand. I know the problem of some dealers in the Internet (ie car spare parts) in germany: Offers products, but not have it. They order it, when customers order there. Greetings from sw-germany (europe) liked + subscribed

[@Bushradical]

Hello Germany!

[@tacodude286]

I've got one of their Gunny models. The sheath and knife are both top notch.

[@Bushradical]

Ive never owned one but they look nice.

[@bobashmore6442]

Awesome video! I definitely would love to get my hands on a BRK, alas they're a tad over my budget. Really looking forward to your visit to Knivesshipfree!

[@Bushradical]

Thanks Bob. That video should be up soon.

[@MemoriesRR]

Outstanding. Thank you.

[@Howardsheppard]

My son and I will be at the Grind-in this June. So exited. I’m mildly addicted to BRKT knives. Mildly is, of course, subjective.

[@Bushradical]

I might try to make next march. It would be fun.

[@MoondyneJoe]

Another great video Dave very interesting Thanking you

[@Bushradical]

Thanks!

[@joaocamara9979]

Eu queria muito ter uma faca desta,elas são perfeitas, de grande qualidade,parabéns pelo trabalho de vocês!felicidades pra todos aí!

[@REIronminer]

Beautiful work

[@Nudel-nc1cp]

Ok. Thank you. Now I want some bark river knife :)

[@jimybrooks6055]

DBK love them I can see why women's eye for detail is best for sure

[@Bushradical]

yup

[@martinwatters2729]

I want a BARK RIVER KNIFE- FNA-OUTSTANDING.

[@Bushradical]

Thanks

[@cillaloves2fish688]

Thx Dave! Cool to see your video version after watching Brooke's... you caught some good footage too! Wish I had the funds for that new one with the hole on the end of the handle or that one that Brooke held with the finger guard... Actually I'd probably be happy to own any one of them, including a kitchen knife... But they are missing one important style... the Ulu!!! You need to talk with them about ur ulu knife, maybe they could produce a run... never know till u ask!! Awesome tour & loved that huge puppy!!

[@Bushradical]

I don't think they work in "vintage saw steel".

[@ssunfish]

Donnybrook is that model and its named after a rough neighborhood in Dublin, can anyone verify?