MANIFOLD ABSOLUTE PRESSURE SENSOR (JEEP/DODGE 5.2/5.9 V8)

[@TheFire259]

I don't even have a jeep but I'm glad you let people know the different sensor you need for older ones and the part number you need for which one most channels don't go into detail like that

[@carlosmaldonado6954]

Hey bro you make me save a lot of money by paying the mechanic with all your videos thanks a lot bro.

[@wblake22]

You making me want to go and replace everything in my truck

[@Mauser1965]

Few years ago I saved some change (~$350) to buy an OBD II scanner in order to do repairs and maintenance. Though I do miss the "mechanical" gear now and then, like I had on my '65 Ford Galaxie 500 for example.

[@wblake22]

@@Mauser1965 My brother had a Galaxie. I got a basic scanner years ago one of these days I'm going to upgrade just not in a rush since I rarely use it.

[@LeeWaddell-f5y]

I have a 93 and 95 Grand jeep 5.2 your channel is a great help to me. Thanks so much.

[@brentfrancis9187]

Another great job! Excellent info.

[@johnscreekmark]

FYI - I just tried replacing the MAP sensor on my 2000 Durango 5.2. I used Rock Auto and ordered the Holstien after-market sensor. The sensor installed properly, but the wire connector does not fit. The connector on the sensor is just slightly too big and it will not allow the wire connector to attach. Had to go back to the OEM original. The OEM MAP sensor is like 4-5 times the cost of after-markets.

[@michaelmartin1338]

Excellent video information straight to the point. I'm so tired of people making videos that tell you every thing except what you want to hear. I don't care how many leafs were blowing down their street when they made the video. Great I wish there was more like this. Thank you

[@BluntEdgeChisel]

Great video man top notch

[@dirtsailoroff-road5580]

Thanks man, great video

[@denniswallace8378]

Nice. I work for Holley. Good stuff we build.

[@douglasdailey5998]

Good information, thanks.

[@collinwood6496]

This is a great video keep it up.

[@jameskuna6047]

the jeep content got me hooked, make a video explaining what happened to it? i'm hella curious

[@isaavci3249]

Is it possible to clean it ?

[@zaegtb]

Where do you find all your genuine mopar parts

[@heathcalvert1319]

Got a p0108 code so i put a new map senser on and still getting the p0108 code what to do on this 99 5.9 dodge durango

[@blue454ss8]

Hi men I don't understand why on ebay some map sensor cost $15 and others $148 and both say MOPAR . Both work the same or the quality make the diference for use time????. How much you pay for???? Thanks...

[@Flores9989]

Ever experienced knocking with the map, Iac valve or coolant temp sensor?

[@TalesoftheScales]

Would really like answer on this!?!?

[@kellismith4329]

@@TalesoftheScalesunlikely any of those cause engine knock, maybe loose exhaust or valvetrain

[@314BENTHEGAMER]

Completely unrelated, but I just bought a 97 grand Cherokee tsi, and it needs either a coolant temp sensor or a coolant level sensor, not sure where they go. Any pointers?

[@barricadegarage5361]

The coolant level sensor is in the resovoir and the temp sensor on the V8 is right beside the thermostat. Use the thumbnail of this video for refrence kzbin.info/www/bejne/aqWmf4Jsg89oa5o

[@ChristianWTR1]

The coolant temp sensor is always "bad" on 3 of my grand cherokees theyve all been replaced. If its coming up on the vic display then your vic might just be acting up . they are known to do that

[@garymarlow2333]

I to have a 97 jeep GC TSI. Great vehicle. Only 150k miles when I got it

[@Flores9989]

Ever experienced knocking with the ect?

[@frandyalfaro8864]

where did you buy the new throttle body?

[@barricadegarage5361]

From summit racing through Ebay kzbin.info/www/bejne/pmWmi3SCpbdnd80

[@ronaldvazquez4373]

What is the hose size of the elbow in case it needs to be replaced?

[@coreychristen2321]

Hey, is that cold air intake working for you? Do you notice any horsepower gains?

[@barricadegarage5361]

No, but it looks a lot better than the factory box

[@Mauser1965]

A cold air intake nor a drop in "K&N" filter in the stock box will not provide HP|torque gains. This has been covered by others using an engine dynamometer.

[@razzle7974]

@@Mauser1965 it can improve mileage if its a proper cold air intake that is completely apart from the engine

[@elchulo4238]

That was a good job changing it..but that engine was sound real ruff and u shutt it up to fast should keep the video little bid longer so we can see tha that was the problem and we dont need no extra parts to be put in ..thank for the imfo..about different ..sensors.. tho..

[@deltawolf1789]

Hey I just bought a new map sensor and bought the 5602-8303 for 96 and older but my plug faces to the left instead of the right I don’t understand?

[@barricadegarage5361]

I ran across that problem when I ordered that part for my '96 but I had no Idea about that problem when I made this video and thought it was a mistake on their part. Right now, im running that map sensor with the elbow shaped vacuum hose being the only thing attaching it to the throttle body, until I find longer screws that fit but it works perfectly fine

[@deltawolf1789]

BARRICADE GARAGE how long have you had it on like that does it move very much. I think that part number is for the inline 6 model because their map sensor faces a different way compared to the v8

[@deltawolf1789]

BARRICADE GARAGE kzbin.info/www/bejne/Y6uuZ2SXltBlrc0 this video shows the sensor on the inline 6 it looks exactly like my sensor

[@barricadegarage5361]

@@deltawolf1789 ive had it like that since I replaced the Throttle body in this video over a month ago. kzbin.info/www/bejne/pmWmi3SCpbdnd80 I just flipped it so the connector faces the drivers side and attached with the vacuume hose. Yes it moves when touched but it takes some force to actually pull it off the throttle body.

[@barricadegarage5361]

@@deltawolf1789 the dodge trucks with the 5.2/5.9 face the same way so its not just a 4.0 thing.

[@isaiasvallejo476]

Hi have you ever had high voltage on MAP sensor or an Idea why it has high voltage

[@cobey4042]

check your grounds, and get a multimeter take measurements on power. and check for shorts.

[@albertaguidetwahl469]

So I replaced the MAP but I’m still getting a high/low voltage MAP code. What am I missing?

[@barricadegarage5361]

Check wires. Also look for any vacuum leaks.

[@albertaguidetwahl469]

BARRICADE GARAGE I tested the new MAP and was getting the proper voltage I then cleaned the idle control and boom! Purring like an angry kitten.

[@babylonmustfall2765]

@@albertaguidetwahl469 glad to hear👍

[@mopar_street_king8501]

I change to my 95 Dakota and started acting weird and check engine light came on

[@barricadegarage5361]

Its probably a defective part

[@r3vpanda]

I would agree probably defective part

[@adampindell]

Comment for the algorithm

[@isaiahcgarza]

2 15 .agency to much