Basic Mixing and Mastering | Main Chorus | Mixcraft 8

[@Flipaholics]

Cool vid bro!

[@iamjustrobert]

easterbunny2014 thanks for the love, brother! Plenty more are on the way!

[@iamjustrobert]

Thanks for watching! Leave a comment with any questions you have! God bless!

[@yzercalaca7886]

This is why I subbed. He is knowledgeable but does not declare that he knows it all. And he takes in all types of comments positively. Salute sir. Thanks for all the help and info. Stay humble

[@iamjustrobert]

Amen! Thank you for the kind words of encouragement! It’s all God! I’m just thankful I can share my knowledge to the best of my abilities. Thank you for subscribing! I’m going to try my best to have new content on the way!

[@MACCMALONE]

I have 8,ur a good teacher

[@iamjustrobert]

MACC MALONE great! I really appreciate the comment! If you could make sure to subscribe and share this video, that would be great! Thanks for the love! Be on the lookout for our ADVANCED course that we have coming out!

[@iamjustrobert]

DEFINITELY make sure to check out our MAIN VOCALS video!

[@timmenchaca4728]

Good stuff. Looking forward to the next video

[@iamjustrobert]

Thank you! Please, make sure to subscribe and check out all our other videos!

[@chichiq..7190]

I am recently new to mixcraft 8 , and I was wondering if you could give some advice on how to get started.

[@iamjustrobert]

Thank you for your comment and I apologize for the late response! Please, subscribe to our channel and check out all our Mixcraft tutorials! If you have any further questions, please don’t hesitate to reach out for help! Thank you and God bless!

[@therealroc_ez7824]

I still use Mixpro.6 and to note @ 3:57 the reason your audio started to drag is because your CPU is running hot from an overload. Where does the overload come from???..... the multiple Reverb & delay efx's you're using. I seen the 1st vid and someone suggest you use send tracks!... bro listen to me...dont be like I was or other so called producers who mix this way because its cool yet inappropriate in terms of running the cpu HOTT! this could ruin your drivers later on down the road. take a day or 2 or however long needed to teach yourself the correct way from other shared via KZbin vids. SEND, AUX & BUSES are very important to your mix. They act as the extended help to bring more clarity to your mix. The key is to set up 1 send, aux or bus track\ per category such as Reverb Delay Chorus etc... you may have as many tracks feeding signal to 1 send as opposed to 5-10 efx on each track which is WAAAY to much at once processing. Your cpu will run hot and start to static or drag or worst CRASH!!. Unless you have a super computer like high end Professional studios, your putting way to much responsibility on your pc! The BIGGEST threat to working in that manner is a possible "crash" without the ability to save your work and lose ALL YOUR HARD EARN work. A super BUZZ KILL!!!! other then that, you are doing very well. I hope this helps bro. Be consistent in your journey. Peace! ps (you may put an Eq and Comp on each thou, they require little to no cpu usage) This thy most common thing for beginning producers fail to go thru at early stages. Also get into the art of "Gain Staging" the structured way to set vol levels just before you began to mix. Your final results would be MUCH APPRECIATED!

[@iamjustrobert]

Dude, thanks for the AWESOME comment! There is really a lot of helpful information here! Also, thank you for being so polite and constructive with your advice as well! I actually use my HP Laptop at the moment while we save up to get an actual desktop build for us. So, I know my laptop has very weak processing power, so with all the effects and stuff going on, it creates too much work and the laptop starts to break down as you've explained. Again, I thank you so much for your comment and I'd love to get in touch with you via social media and build a relationship together! You can follow us on Twitter or IG @GodMadeFamily and also find us on Facebook by searching Ro3! Again, thanks SO much, bro! God is good and hopefully, we can build a relationship together and continue to grow as audio engineers! God bless!

[@therealroc_ez7824]

Ro3 So not a problem and anytime my good brother. I agree, let's stay connect to share or exchange vital info that improves the quality of our craft. Stay motivated & blessed as well bro👍🏽

[@iamjustrobert]

Yessir! Amen! Sounds great!

[@coldcodyofficial]

You can make Presents so you dont have to duplicate everything...

[@iamjustrobert]

Do you mean presets? Yes, I have many presets that I’ve saved. However, duplicating everything saves A LOT of time, rather than going through individually and re-adding each plug in one by one all over again. It’s far more efficient to duplicate everything💯 but, thank you for your comment! Please, make sure to subscribe! We have lots of new content coming up!

[@coldcodyofficial]

You dont have to add them all one by one if you save them and name it in a folder they will all pop up its faster than the way your doing it. Once you have everything up there hit the save preset button then once you click on it they will ALL pop up you dont have to add them one by one. But good video keep up the good work 🤘

[@iamjustrobert]

Cold Cody ahhh, you’re referring to having a CHAIN of presets! Have 1 master chain preset that contains all the individual presets! Yes, I have those as well and I do utilize that ability! However, I think the difference between doing that and duplicating is mere seconds so, it’s not that big of a difference. I thought you were referring to doing it individually😂😂😂 but hey! Thank you for the comment! I really appreciate it because there could definitely be someone who reads your comment and learns about the topic we’re discussing! So, thank you for taking the time to comment as well as respond for clarification! We appreciate it, truly! Looking forward to having you subscribed and becoming an active member of our community! Thank you and God bless!

[@g.duanhomestudio]

Bro..how to avoid overload while recording a vocal? Do i have to put on the compressor before recording the vocal? Im using mixcraft 8 too..

[@iamjustrobert]

G. DuAn hey, thanks for commenting! I’m not too sure what you mean by “overload while recording”? Could you further explain?

[@osolife1872]

Subbed💯

[@iamjustrobert]

Thank you!

[@osolife1872]

Just Robert keep goin w dis for real I learned sum stuff frm dis Ian even kno about and could you tell me the settings for the delay i didn’t see it

[@iamjustrobert]

Of course! If you look through our videos, I have an upload where I’ve shared my delay settings. Again, thank you for your support for our channel!

[@nikkocarter20]

ok bro, I subbed... great content !

[@iamjustrobert]

Awesome! Thank you, so much! Make sure to check out all our other content as well. Thank you!

[@djmo7274]

Bravo

[@iamjustrobert]

Rap Liby amen! Thank you! Please make sure to SUBSCRIBE and check out all our other videos!

[@sanjanaflorist9049]

REALLY HELPED BRO

[@iamjustrobert]

Amen! Thank you! All glory to God!

[@Verse-Atiles]

Show your Settings In your Tutorials bro Would help A lot!!

[@iamjustrobert]

EMCEE SHANU I do show my settings in my tutorials😂 what do you mean? But thank you for commenting! Perhaps you’re not subscribed and you have checked out our other mixing and mastering videos! I show my settings or else how would I be able to help you?😂 thanks again for the comment!

[@Daize504]

When it gets choppy like that I mute the tracks that aren't playing. Mixcraft will be able to process all the plugins then.

[@iamjustrobert]

Yes! Exactly. I'm doing this all off my HP laptop. Once you work from a desktop with a stronger computer, you won't have that choppiness so much. But thanks for commenting! Good job on your part, it took me a while to figure out to mute everything LOL!

[@Daize504]

@@iamjustrobert it took as well. i had to do research on it and found out it was the amount of plugins in the whole project. Usually making space on your hard drive would reduce the chops but youre absolutely right. A desktop with a damn sure stronger processor would read through everything with no problem. im rambling. LOL Anyways thanks for the vid. YOU HAVE NO IDEA HOW MUCH YOU HELPED ME OUT!!!! Real talk. im subbed and cant wait for more

[@iamjustrobert]

Daize Bryant amen! Forsure, don’t apologize! I love others insights. If you have any questions we can cover on future uploads, just let me know! Thank you for your support and God bless!

[@tikemyson4685]

U don't even have to mute them bro. Just freeze them. It allows those tracks to still play in the mix while not burning up cpu do to the effects.

[@primerekords8049]

Louis from Ghana, West Africa

[@iamjustrobert]

ItzPrimeOnDaBeat • that’s where you’re from???

[@primerekords8049]

Oh yeah... hahahahaha, it’s crazy huh? Am In Ghana Currently...

[@primerekords8049]

That’s where am from and that’s where I stay

[@iamjustrobert]

Well praise the Lord! That’s awesome! Thanks for your love and support! Please, make sure to subscribe if you haven’t already!!!

[@primerekords8049]

Oh B, I did that... lol myself been struggling with mixing and stuff just got the mixcraft 8 pro and am really feeling your vibe and plus you Christian... hahahah

[@IshmaelDixon]

Still watching in 2020

[@iamjustrobert]

Ayyeee! Appreciate you, brother! We've got A LOT on the way! Stay tuned by subscribing! Appreciate you!

[@Mishivlogs]

New friend stay connected

[@iamjustrobert]

Thank you! Please, make sure to subscribe!

[@bloodhoundwolverine8233]

Cool

[@iamjustrobert]

bloodhound Wolverine thank you! Please, make sure to subscribe and check out our other videos!

[@Daize504]

Oh you already did that lol

[@iamjustrobert]

Haha I appreciate your feedback, man! Looking forward to reading your comments on our latest Mixcraft Tips videos and having you be a part of our community! Please, make sure to subscribe! God bless, bro!