Basic Motor Control: 3 wire Start Stop Circuit

[@ktoectbkto]

This is the best video I have ever seen with a thorough explanation of the circuit especially if you are a self learner as I am. Eleven minutes of this video equals to weeks of learning in schoool. Good job sir, keep those videos on rolling out!!!

[@heteroyenoushum3631]

Hi

[@Chris-kl5rw]

Yes an excellent video simple to understand!

[@mkhitarnazaryan1161]

I like it

[@garza1367]

6 weeks of motor controls class summed up in 11 minutes. Great, simple, effective content.

[@garysackrider529]

I've been doing electrical for 25 years and just now start doing motor controls and this really helped me out a lot thank you

[@D.Hozzie]

Hey Walter. I have been “ one of those electricians “ for a long time. The MC aspect has kind of stopped me in my tracks quite often. I work for a zoo and so my duties as an electrician can vary greatly. Thank you for this and “ sparking” my interest with bettering myself. Good things!

[@mistertruth8001]

I wish all journeyman, foreman, instructors,... were like this guy. GOD BLESS THIS MAN!

[@AccessToPower]

Thanks for the great comments!

[@dustinhogue6057]

I agree

[@SmiTTyy-sh8nc]

"Latch circuit" That term helped me remember that using a N.O. Aux. contact keeps the circuit energized after pushed. Great explanation video !!

[@raymondsciara]

This is the best demonstration on motor controls I have seen.

[@dustinhogue6057]

One of the best tutorials I've seen enjoying your training methods. Detailed explanations easier for me to understand than some of the field training I get.

[@denniscoates2827]

Great video. In water/wastewater industry. This type of online training is priceless. Thanks for the service!!

[@robertthomas3970]

Explanations clear, well demonstrated . Thanks for such an awesome video

[@tedkiser2626]

Absolutely the best and clearest description of a motor starter that I've seen. Thanks

[@MrYuJoo]

I'm in school for this now and my instructors are barely explaining these simple concepts. Your explanations pretty much gave me more confidence in understanding this stuff. Subscribed!

[@prodson8310]

Thanks for the video. You use terms as if everyone knows exactly what you’re talking about. It is a great effort

[@SH-pc4xt]

Thanks so much for this video, and the entire series!! Just a hobbiest, but am installing CNC mill and manual lathe in home shop. Came to these videos based on VFD intro videos, stayed to watch these basic tutorials on motor control. Last year I had 2 electricians helping me to troubleshoot a 20 yo but "brand new, unused" 18" bandsaw. Couldn't get it to start even though all the switches seemed fine. I finally discovered that by manually closing the contractor, the motor would start, thus eliminating the motor as "the problem." I used a volt/ohm meter to verify that power was making it to the motor control inputs, and that the basic control switches were working as intended. I went so far as purchasing a replacement control unit from Amazon but then I was stuck. The second electrician was brought in at this point. He was able to diagnose the problem with the original motor control unit (from ~1988)--the primary relay coil had break somewhere so it would not energize. The contractor units have been standardized for decades, so the second electrician (the 'motor-control whisperer') as able to harvest the coil unit from the Amazon replacement and use it in place of the original unit. Everything just snapped together and now the unit operates properly with it's original control switches and front panel intact. While this was a great result I don't like to think about how much all that cost (lets just say a few hundred dollars). Having watched these intro videos on Motor Control and 3-wire start/stop circuit basics, I could now understand better how it was all working (or not working). Don't know that I would have figured out what the problem was, but at least I would have had a chance. Finally, I'm going to keep watching this series because, for example, I may want to add an additional stop switch to the bandsaw. The red momentary NC switch assemblies are readily available on Amazon. From these videos, I think I understand how to add more to make the machine safer to use with a more accessible STOP switch.

[@stevepatterson1994]

This is the best illustration for a basic motor starter. Thanks!

[@migueldelgado2217]

This is all new to me and I have seen many videos and try to understand how these connectors work and, until today , I was still in the dark until I saw this different way of explaining circuits. This has to be the best explanation I have seen. Thank you.

[@AccessToPower]

Thanks for the awesome comment! I appreciate it and I am glad the video helped you!

[@mistertruth8001]

I love this guy! What a cool demeanor he has and he's very informative.

[@bndwoodlands775]

Great job! First and only video I have seen where the narrator explains the seal in contact correctly, ie it is an auxiliary contact and not just some random normally open contact somewhere.

[@Eric2Judd]

I watched quite a few contactor videos and this is the only one that clerifies how contactors work.

[@insteelitrust3537]

I am a me engineer. I started to watch your videos today and amused by quality and simplicity of the information that u share. Thank u very much for the hard work. U would be an amazing teacher.

[@elc2k385]

I immediately shared this video with my classmates. It's a miracle of instruction. Thank you!

[@AccessToPower]

Thank you for sharing the video and taking the time to comment.

[@Al-Garsan]

Walter, thank you for creating these videos with explanations anyone can understand (even me!).

[@AccessToPower]

You’re welcome! Glad they are helpful

[@pmdiamond]

Excellent video. Thank you. Troubleshooting 3 phase 480v. I love it. Just today, had one phase open, after following conduit, found a bent 3\4 piece of EMT and a burn spot. Friday the guys changed a screen on the El Jay shaker, evidently when they dropped the screen over the side onto the ground they hit the conduit for the feed conveyor. So, overload tripped out from single phasing. Used a tubing cutter, on EMT and added a box a new seal tight. Reset overload and it's up and running again. Boys were clueless they even hit it.

[@AccessToPower]

Good job troubleshooting the motor today!

[@thokubina3055]

One of the best videos Ive seen on the explanation of this, especially for a refresher when you haven't been around it in a bit, thank you!

[@AccessToPower]

Thank you

[@BobbaFett312]

sir, i work in power industry and this is one of the best videos out there, liked and subbed

[@RR31982]

Clear, thorough explanation of basic start-stop MC circuit. Thank you

[@saviourafia3198]

I really appreciate the way you explain the circuit. Thanks

[@mag4657]

Excellent Video on three wire motor control systems. Very easy to understand with ladder diagram. Thanks

[@alfredminor1914]

Great job, you simplified it without over talking it... brilliant

[@jamiemendez137]

Great video very simple to understand best explanation I have seen

[@GavinCasterMusic]

This is a great refresher video for plant engineers like myself, who work on many different building concerns, including building wiring, motor controls, and logic drive systems. Thanks.

[@AccessToPower]

Thank you very much!

[@dtv1966]

Damn, where was this video when I took motor control. Excellent job.

[@shahshakib5234]

Where did you take Motor Control? any links?

[@dtv1966]

@@shahshakib5234 when I was an apprentice at the IBEW.

[@craigseib3578]

You’re an excellent teacher. Your thought pattern combined with great visuals really reach the audience especially those who learn differently. Thanks for the efforts.

[@AccessToPower]

craig seib thank you for the nice comment. I really appreciate it.

[@philliplee7703]

I really enjoyed your video, it gave me a clear understanding of motor control circuit, but not only that, it gave me a clear understanding of how to correlate plc and line logic

[@yoosn911]

I have been self study PLC ladder programming & wiring a pump, this video explain everything so clearly, TQ hope to see more video with actual electrical circuit and its coresponding ladder programs

[@willardguillot1123]

I just started a job where I need to learn this stuff and I love my job. They are training me, but this video was as so much more helpful. Thanks can’t wait to see more.

[@adamszajman3870]

the visual of the hardwired to diagram really helped, thanks.

[@joeclark6842]

the best Motor Control video yet, I hope you keep making videos like this one but alot mote complicated.

[@papysongo1917]

I really appreciated and liked this video cause it gave me the basic instruction of how 3 wire start stop. I'd like to see more videos like the one multiple start and stop buttons.

[@Loves-m4w]

Great explanation on how to actually understand how the circuit works, I work in a huge paper mill when I'm in the MCC room looking at this bucket my motor could be hundreds of feet away where the wires leaving the load side of the motor starter goes to a local disconnect first , then feed the motor for protection.

[@dcoakley11]

Great video clearest explanation I’ve heard and seen thanks

[@eulaliorodriguez5325]

Thank you for sharing this great video.

[@hugovargas7411]

I’ll like to see how you wire something like that with wires and all of that! Thank you

[@amanuelberhanu6920]

This you making this video it is so simply clear. Geniuses make complex things look simple and understandable

[@nicolettesarubbi1400]

Currently preparing to take my license for engineering and this help so much. Thank you!

[@AccessToPower]

Glad you found the video useful!

[@ericweiden6232]

Excellent thanks for the clarification easy to understand what you're teaching other videos and I've watched a lot aren't as good as yours

[@abhijitnayak5445]

This is awesome. I just start watching your videos & I love it. I am sure this will help me in my career as electrical officer in merchant Navy.

[@olemcdonald5035]

Thank you for your very thorough explanation.

[@AccessToPower]

You are welcome!

[@johnsavage7003]

Nicely said , Great Instructor , I would like to see more of your videos about motor controls. Thank You for the information , You Rock!

[@watchingyoutubeat]

i am not an electrician but i clearly understood the basic 3 wire electric motor system advantages . . .perfect presentation ,

[@remysimoneaux709]

Great video, loved your visual explanations,really effective, keep it up

[@top10trends59]

You are great teacher!!! Thank you so much and keep up the good work.

[@AccessToPower]

Here is the software I am using www.cmhsoftware.com/constructor.html

[@wimm1392]

Very good video to keep my rusty mind going. Thanks very much

[@gabrielabraham427]

Thank you for actually demonstrating

[@akosahkwabenaboakye2378]

This video was very helpful. Thank you.

[@clavelarmandojesus4048]

The simplicity you explain make easy to understand. Thanks for such a great 👍 video

[@Steven-qs6wj]

Phenomenal video. Just need field wiring example.

[@annalynneirvine]

Yes pleassssse, field wiring example

[@mistertruth8001]

Man! I like your energy level, how well you communicate,... I seriously am intimidated by controls.

[@selvakumarr6672]

Excellent learning. Keep sharing your knowledge..👍

[@lawoull.6581]

In one 1 min. I'm impressed 💥

[@AccessToPower]

hello Linh, the software I used for this demo is called Constructor. here is a link to the info page. www.cmhsoftware.com/constructor.html

[@landen203]

What software do you use for your schematics? You've made this 10x easier to understand.

[@AccessToPower]

It’s called Constructor

[@vernonjones2115]

Many thanks Walter fabulous teacher 🇬🇧🇬🇧

[@ImaGhost13]

This was a great video, thank you!!

[@bobbygonzon5428]

Thank you for producing this video and for dropping knowledge bombs 💣 😎👍🏼

[@AccessToPower]

Your Welcome!

[@user-gk2rx5xj8w]

Wow great video very informative. Thanks man!

[@marccharlot8896]

Thank you sir, for another excellent learning video

[@mediapeopledigital285]

Excellent job buddy!

[@brandonserna1177]

Great demonstration

[@nv7620]

One of the best videos. Thank you

[@sukhwinderkailey848]

very informative video, it cleared my holding contact question, Thanks

[@AccessToPower]

Glad it helped

[@mariodiaz1385]

Nice well explained simple, i just started a job where i have to troubleshoot industrial machine very helpful to me thank you very much

[@raminla2000]

Thanks, these Videos helped tremendously, I’ve worked on variety of Control Panels for Conveyor systems, And in my case had issues with actual loose contact wires that caused initial replacement of several components because, couldn’t determine actual cause of tripped breakers, also pitting and much carbon buildup that causes resistance buildup or arcing, loud explosive sound and smoking out of the Panels, at first thought was overloads because the high Current demands but turn out to be gap between contactors

[@Billdates7798]

Best video and we'll Explained. I loved it

[@joehamilton5467]

Love it....explained great.....please more more more....thank you

[@AccessToPower]

You got it!

[@deanmohamed7575]

Excellent explanation.

[@meridiansouthfoursquarechurch]

Youre a very, very good teacher

[@AccessToPower]

Thank you,

[@evertonknight3149]

I enjoyed your video very straight to the point. Hope to see more on wiring the 3 wire stop start station. Thanks

[@avutiapios8862]

Nice demonstration of engineering work

[@jamesthomson5178]

thanks, great video. I'm just dipping my toes into this as I have an issue with a machine in the workshop and needs to be rewired so thank you. I think the hardest part is finding currently is what comments would work in my situations, I have a DOLD soft start and DC brake unit that I am trying to understand the wiring diagram of but some bits don't make sense, also do I put other breakers before it. thanks James

[@robertpora6921]

This video is very helpful Thankyou

[@abrhamgonzalez6582]

Thanks it helped me alot. Can you show more videos. I just started as an apprentice. And I need all the help I can get. Thanks again.

[@gailbartholomew1042]

Excellent video. Best I have ever seen. Now I know. Thank you

[@AccessToPower]

Gail Bartholomew thanks for the comments

[@KIMKim-ql8zx]

Brilliant Contet. keep brining more. Thank you

[@gilbertageh7276]

Infact you did well sir, you are the greater master, am enjoying your lecture. I know this already but am still looking forward to know more sir thanks 🙏

[@stephenfarkasovsky7954]

Very good layman’s terms , easy to follow. Only thing better would have been showing how you hook it up to the starter coil on an actual starter. Up close. That would have made it PERFECT!!

[@TheWalbla20]

Thanks Chazz. I loved A Bronx Tale.

[@boxcutter0]

Thanks for the wonderful video! A presentation explaining how a relative novice can best cobble together misc budget/auction items together to form a versatile workstation would be monumental.

[@earlgrey1429]

I love your tutorial. Thank you.

[@asoteico9528]

Great !!! Just starting with motor controls !!!

[@joelcardz1]

thanks for these videos God bless you.

[@engineeringsolutionshud]

Nice to always teach on motors

[@tinysand3517]

Thanks Walter, you made it seems so simple

[@valev5705]

The best of the best!!! Thank you señor!

[@johangroenewald1752]

I enjoy your videos, I learn, electricity is not my subject but It comes to a point where you have to evaluate the risk and to save money to diy. PLEASE DO A VIDEO ON Drum switches, like to wire a splt phase 3 speed motor

[@MrLingala]

Well Explained Sir...Keep it Up...

[@rockyyeung9893]

Till 2024 I watched a lot this kind of videos, this is the best video I have ever seen with completely step by step animation. I don't have to use too much imagination force to understand all. Great job. I wonder is there any contactor that uses its Lines to activate the control circuit, rather than use external 120V power source ? If yes, how is the circuit look like ?

[@jeffreykellogg9603]

This was very good. This did make it simple. The diagrams and physical equipment was complementary and helped. If the words were a bit bigger on the diagrams it might help some though.

[@sohailjanjua123]

Hi, I like your video.Thanks

[@JesusReynoso-jg3ko]

I like this video you make it very simple to do it, keep doing it

[@mikestoolfun]

Wow!! An amazing video! Thank you

[@joetlewisjr7341]

thanks so much for the update, please i want to know more about timer connection

[@jaimehernandez5791]

I really like this video, I want to see with a selector switch on-off-auto, two pilot light green and red, with the overload. You can explain it in the computer but also I wanna see how you wire all that.