II learned more about Civil3D in this 23 1/2 minutes than I have in 30+ years of Heavy civil surveying. Thank you so much and I wish I had seen this 4 years ago
@theodore23sanchez Жыл бұрын
Thank you very much! This is the first Civil 3D tutorial I've watched that starts literally from scratch and with attached files!
@muhammadzaidhasan1426 Жыл бұрын
where are the attached files?
@sarahfrees44277 ай бұрын
It's in the description @@muhammadzaidhasan1426
@tonyt7572 ай бұрын
@@muhammadzaidhasan1426 In the header there's a google drive link :)
@rachier57302 жыл бұрын
This video ranks as the best in illustrating road design for a beginner.
@adamalzahabi323Ай бұрын
Thank you so much, I learned way more then what I have learned last 6 years in civil 3d design
@erniejanejalem56113 жыл бұрын
This is the most on point tutorial i've seen so far. Great content!
@philipagaikonia2874 Жыл бұрын
Thank you Dr. Nasser Yari. I really appreciate it.👍👍
@gerardodacruz51883 жыл бұрын
Thank you very much for your work Dr. Nasser Yari! Really appreciate it for making amazing contents that will allow students from around the world to learn about this software. Look forward to watching other videos on this topic.
@faraadrasul4403 Жыл бұрын
Excellent work Dr. Nasser Yari. Everything was well explained in details. Thank you so much. Very much appreciated.
@zephawisher3 жыл бұрын
Thank you so much Doctor. Love from Uganda
@gustavogonzalez49853 жыл бұрын
Thank you for this great guide! I'm beginning to learn Civil 3D and have found this series to be very helpful.
@yatri63523 жыл бұрын
Now i am the begineer of civil 3D. Hope you are in somewhere between ocean of civil 3D. Any suggestion as your experience for me the begineer
@katetilas86543 жыл бұрын
I honestly come and watch this video because I love Yari as a professor and miss taking classes with him!
@nasseryariphdpe6483 жыл бұрын
Hi Kate, Hope all is well. It is so nice to hear from you. You were one of my best students.
@muhammadabdulazeembaig7402 Жыл бұрын
asalam o alikum, this video is a gem, i am out of words. Just want to say may allah bless you with all success and happiness
@specpers07 Жыл бұрын
thank you for this valuable sharing. appreciated it
@nitusharma84243 жыл бұрын
Thank you Nasser. The video is really helpful and thank you for sending across the data files. I have learned so much from your tutorial. I look forward to learn more from you so please keep making more videos like this :)
@medhavigupta60603 жыл бұрын
Can you share the data files so that i can practice?
@Shama7991Ай бұрын
this tutorial is really great for beginners , thank you so much
@bridgetndlovu36492 жыл бұрын
This the most helpful tutorial thank you Sir and thank for the prompt response on sending the cv files
@dhruvsaxenadstar7 ай бұрын
Great video.. described with utmost clarity~!!
@mariospolyzos41873 жыл бұрын
Perfect and informative tutorial, Nasser is a great coach, thank you. Greetings from Greece!!
@sadiqalsitri77253 жыл бұрын
This is exactly what I was looking for , thank you soo much for that great video & thank you again for sending me the files ♥️🌹
@akashkharade36312 жыл бұрын
Very Nice. to the point explanation.
@Chittywok10 ай бұрын
Damn this tutorial saved my ass. Thank u bro u a real one
@morrisnjoka2732 жыл бұрын
The video is very helpful and to the point.
@owekajr38892 жыл бұрын
Amazing tutorial
@javedjalal95723 жыл бұрын
Nice Illustration. awaiting for next videos
@renzonartiga35222 жыл бұрын
Thanks for this content. Very Helpful
@hockenstein012 жыл бұрын
Very informative!
@ahmedsalama22502 жыл бұрын
Much appreciated!
@githuikareth3 жыл бұрын
really understanding class
@faraidube29388 ай бұрын
most succinct Civil 3d tutorial thus far
@lavac.98313 жыл бұрын
Thank you for e-mail and this illuminating tutorial Mr. Yari
@carolthucnguyen8743 жыл бұрын
Thank you for this useful video Dr. Yari!
@coreyjohnson22912 жыл бұрын
Great video and easy to follow
@ivonananceska61522 жыл бұрын
Thank you for your e-mail professor. Amazing video!
@CAD_Lecturer Жыл бұрын
So helpful
@ALPHONSEKara-g2l2 ай бұрын
Thank you so help full 🎉
@abdulmuminiahmed4483 жыл бұрын
WaW! Thank you very much sir... Your videos are really easy comprehensive and straight to d point They are indeed amongst the best videos I have come across online Thank you sir
@nuatilotolua98243 жыл бұрын
Thank you Dr. For this great video and lookinh forward for more videos like this
@paulfranco2502 жыл бұрын
Thank you for this video, helped me out a lot.
@abduljamil29932 жыл бұрын
Very easy to follow tutorial.
@ThatWasNew3 жыл бұрын
Great lecture, finally I got It, Thanks 🙏🏻🇳🇵🇳🇵🇺🇸🇺🇸,
@vaksoy12 жыл бұрын
You are an amazing professor. Very easy to follow and learn. I will follow.
@roelsepatjr.10172 жыл бұрын
THANK YOU VERY MUCH SIR! I learned a lot from this video, hope you can create more youtube video about civil 3d, amazing and easy to follow!
@beletahkariuki16852 жыл бұрын
The video was very helpful and thank you for the data.🙏
@vncsgn38692 жыл бұрын
Thank you very much! very good!
@silasopiyo8871 Жыл бұрын
This is great.Just nice
@omoladesundayjoe58109 ай бұрын
Thanks alot Boss
@johnburkhead16673 жыл бұрын
Great video, It explained the all the steps needed .
@aaltom78493 жыл бұрын
Very useful video. Thanks for sharing
@Tinygamer093 ай бұрын
Goated tutorial
@diefrage14533 жыл бұрын
That's brilliant, many thanks!
@josadventures41743 жыл бұрын
This is so cool. Thank you!
@nasseryariphdpe6483 жыл бұрын
Thank you
@CAD_Lecturer11 ай бұрын
Thanks alot sir
@abubakarismail83213 жыл бұрын
Thank you soo much. This is a very helpful and informative video. Keep it up.
@luyolomagwebu3892 жыл бұрын
Amazing, thank you.
@sajeevkumar72283 жыл бұрын
at last _ its here , thanks , its really helpful
@pranavbhoskar53983 жыл бұрын
Thank you for the useful video
@charitykamwale54402 жыл бұрын
Very helpful tutorial 👍🏽
@paulaparecio9713 жыл бұрын
Thank You for this tutorial Sir Nasser. More videos regarding road designing please.
@yunseokroh3 жыл бұрын
Great Lesson. Thanks for your efforts.
@kenaopebenjamin95483 жыл бұрын
Perfect tutorial....
@ThatWasNew3 жыл бұрын
I got it thanks Sir, Great great video for the new students
@nasseryariphdpe6483 жыл бұрын
Check your email
@waqarkhanwaqarkhan13973 жыл бұрын
Keep at up Sir
@isratkhan751 Жыл бұрын
Great video. Thank you so much for making it. I created the vertical alignment but it is not showing the stationing information like yours.Can you tell how to set up the drawing file / which settings to change so that my drawing looks like yours ?
@hannyinyihtun83373 жыл бұрын
thank you very much
@eniolarauf13973 жыл бұрын
This is lovely Thanks so much
@Mercury131225 күн бұрын
Which is more flexible when doing road and subdivision infrastructures, Topcon Magnet Office or Autodesk Civil 3D?
@ivani_twso Жыл бұрын
Thanks very much for your videos! Just a quick question if i may, is there much difference between civil 3D 2018 and the 2020 version that you're using? Will there be functions that are not available for 2018 version?
@nasseryariphdpe648 Жыл бұрын
Not much difference. You can look at my other videos 2023 version you will see the methods are same.
@ivani_twso Жыл бұрын
@@nasseryariphdpe648 Thanks very much Dr Nasser! Hope you can continue to make videos on youtube. The explanations and tutorials given are top notch and amazing! Very rare to come across channels like yours who genuinely teach generously. Keep up the great work.
@ivani_twso Жыл бұрын
Greetings from Singapore.
@forofficeuseonly67612 жыл бұрын
I can really understand your tutorial, this is the best tutorial for beginners, Can i request for the point data so i could practice it. Thank you very much!
@nasseryariphdpe6482 жыл бұрын
Send me your email so I can email you the file at nyari2317@gmail.com
@thealustestica41452 жыл бұрын
@@nasseryariphdpe648 hello sir, can I request a copy too?
@nasseryariphdpe6482 жыл бұрын
Send me an email at nyari2317@gmail.com
@user-gq8xd8bx5q Жыл бұрын
Good tutorial thanks! How do I get a report of cut and fill? Do I need to make another Surface?
@FCTFFets3 жыл бұрын
This is superb. But i wished the audio was a little bit louder!
@joktanjapet80693 жыл бұрын
thank you so much...
@user-om6kp9vg9e3 жыл бұрын
Helpfull😍😍😍
@IRERATuyambazeSymplice-wd6fl3 ай бұрын
thank you for helping me, but can plz show how to make reports for cut and fill and section views, thank you for waiting your feedback.
@nasseryariphdpe6483 ай бұрын
I have link for cut and fill and more please read the description and links below the title.
@IRERATuyambazeSymplice-wd6fl3 ай бұрын
@@nasseryariphdpe648 , Could you send me link for them?
@daberechukwumiracle75623 жыл бұрын
Great video, very helpful, but sir I sent you an email so I can get the point data for practice. Keep up the good work
@dialeminimacdonald44562 жыл бұрын
Did you get the data files?
@mastmoviehub43889 ай бұрын
❤
@FjLGuevarra2 жыл бұрын
Great Lesson Dr. Nasser Yari! I learned a lot from here. May I know where can I download the csv file to practice on?
@nasseryariphdpe6482 жыл бұрын
You can email me at nyari2317@gmail.com. I will send you the file.
@FjLGuevarra2 жыл бұрын
@@nasseryariphdpe648 Done, Dr. Yari
@eddymaleng3 жыл бұрын
Nice🙏
@kingguiopaguia21619 ай бұрын
This is very comprehensive. Can I kindly request for the point data for practice? Thank you very much!
@alisday62062 жыл бұрын
Hello sir, thank you so much for sharing a part of your knowledge with us. I sent an email for the data file, sir.
@edgardodicla40903 жыл бұрын
Very good Sir but hope next time put your volume little more..please do video about cross section and cut & fill volume..thanks.
@nasseryariphdpe6483 жыл бұрын
kzbin.info/www/bejne/qmrPaZeqr9KWhpI
@videoxtra68502 жыл бұрын
Hello sir I’ve been following your videos, please sir I’ve been having difficulties with my alignment I don’t know if there’s how I can show it to you so you know how to help me with it. I’d really appreciate your reply.🙏🏾
@TUNEDWORSHIP11 ай бұрын
Sir can I ask, when Im doing the corridor part same with your video but my screen pops up an error and it says target object not found. thank you for your immediate response! Im from Philippines love your videos
@nasseryariphdpe64811 ай бұрын
So it's a warning and not an error? This is a very important distinction to make. If it's a warning, there could be nothing wrong with the model. If it's an error, then there probably is. And you may have not set a surface target. Probably for your daylight or something. Expand the eerror; which subassembly is it referring to? Is is an offset or elevation error? If it's an alignment warning, then you probably have width targets set, but those targets don't exist for the entire length of the alignment and that's no problem.
@ashok3053 жыл бұрын
Thank you so much.... would have been more perfect if there is drive command
@erniejanejalem56113 жыл бұрын
I was wondering if you have any tutorials on how to make a point data from scratch? Thanks in advance
@nasseryariphdpe6483 жыл бұрын
No. point data was generated from surveying the site
@RandolphGewa10 ай бұрын
Thank you sir. Can I have the copy of that survey excel sheet. Wanna try it out using your data.
@nasseryariphdpe64810 ай бұрын
Click on the link blow the description
@afiffuddinabdulaziz8304 Жыл бұрын
hi i would like to know how to design platform for landfill. hope u can share. thank you
@nasseryariphdpe648 Жыл бұрын
You need to survey the area and use proper grading. See these two videos' for grading. kzbin.info/www/bejne/fKjXZGWur8eiedE kzbin.info/www/bejne/h6m7c56Yg7CqpdE
@ashiqnajar81693 жыл бұрын
sir, which format of point data it accept ,csv, excel or any other
@nasseryariphdpe6483 жыл бұрын
Hi Najar, Excel and cvs. If you send me a email at nyari2317@gmail.com I will email you the point data.
@ashiqnajar81693 жыл бұрын
thanks @@nasseryariphdpe648
@erniejanejalem56113 жыл бұрын
@@nasseryariphdpe648 Hello sir, i sent you an email, i hope I can get a copy of that point data file too. Subscribed and Liked, and will be coming back for more tutorials
@nasseryariphdpe6483 жыл бұрын
@@erniejanejalem5611 check your email
@nasseryariphdpe6483 жыл бұрын
Both, send me an email I will send you the point data nyari2317@gmail.com
@gideonsakala28732 жыл бұрын
Thank you for the video. volume was too low though
@kaths26573 жыл бұрын
Hi! I am a new subcriberr! Can I have a copy of the point data? It would be a big help to practice!
@jacobstephens55642 жыл бұрын
Also, Whenever I go into object viewer 3d Civil crashes every time. Is there something I am doing wrong? my sample file I am working on has a reletively low amount of geolocation points. It doesnt look like a heavy file at all.
@nasseryariphdpe6482 жыл бұрын
It helps to have the latest version
@Insohgram2 жыл бұрын
Damet garm mohandes
@jephsinks58413 жыл бұрын
Can I use the same method for creating a pipe profile sir
@nasseryariphdpe6483 жыл бұрын
Yes, watch my Drainage video kzbin.info/www/bejne/fH6Vn5Vme6uKjLM
@jephsinks58413 жыл бұрын
Thankyou sir but then How do I add elevations minimum and maximum it s not showing anything
@nasseryariphdpe6483 жыл бұрын
@@jephsinks5841 You can edit your profile. Unless when you made your model you missed a step.
@jephsinks58413 жыл бұрын
@@nasseryariphdpe648 when I create a surface am not receiving any type of surface
@jephsinks58413 жыл бұрын
Can you give me your whatsap number I send the coordinates
@philanimkhize2656 Жыл бұрын
When I'm uploading survey data. It gives me error. What is the format of the points?
@nasseryariphdpe648 Жыл бұрын
Its in excel.
@yazeedhaddad28372 жыл бұрын
hi first thank you for that ,please if you can tell me how can i get the data on the excel file
@nasseryariphdpe6482 жыл бұрын
Send me an email at nyari2317@gmail.com
@Queenmercury3662 жыл бұрын
HELLO MY ALIGNMENT IS CREATED BELOW THE SURFACE . HOW DO I FIX THIS ISSUE?
@nasseryariphdpe6482 жыл бұрын
Maybe you need to turn off a layer
@beenay18 Жыл бұрын
How to draw alignment of constant grade over contour lines?
@nasseryariphdpe648 Жыл бұрын
First draw the alignment then go to profile set the grade
@beenay18 Жыл бұрын
@@nasseryariphdpe648 it would result in too much cutting and filling. I want to select the path with minimum cutting and filling for hill road. Suppose two contour lines have elevation difference of 1m. I want to maintain 10% grade. So i have to fit 10m of road between each contour lines. Is there any tool to make it easier?
@michaelscofied55542 жыл бұрын
Nice tutorial Sir , I am would like to follow along please send me the point data.
@nasseryariphdpe6482 жыл бұрын
Email me at nyari2317@gmail.com then I will email you the file.
@ce666isa3 Жыл бұрын
Where to get points I have a project to design any rural road
@nasseryariphdpe648 Жыл бұрын
Hi, email me at nyari2317@gmail.com
@PinaraFarm3 жыл бұрын
Maaf mas mau nanya. saya gagal import civil 3D terus, kira-kira kendalanya kenapa ya . Padahal Bahasa di control panel udah di ubah tapi tetep gagal