Basic Tools You Need to Start Learning Paintless Dent Removal | Pro PDR Tips for Beginners

Hello, Tom here from Learn PDR Online. In this video, I'm going to cover the basic tools you need to start learning paintless dent removal. Of course, there are hundreds of tools available in the world of PDR and it can be a minefield trying to navigate your way through but in this video, I show you the bare essentials to get started in learning PDR!
GET FULL ACCESS to our online courses, tutorials, and MORE!
lpo.li/learnpdronlinetraining...
FREE TRAINING - Access the FREE 5-day Video Series Here:
lpo.li/learnpdronline-2u8
=-=-=-=
Basic Tools - 1:20
Glue Pulling Tools - 5:10
Door Dent Tools - 7:47
LET ME ANSWER YOUR PDR QUESTIONS?
If you have any questions or you would like to learn more leave a comment below the video and I will try and help as much as I can.
=-=-=-=
SUBSCRIBE FOR MORE CONTENT
If you like my content, then please consider Subscribing to this KZbin channel and Liking my Facebook Page to be instantly notified when I release new content for you! ;)
KZbin - Subscribe to my KZbin channel here:
kzbin.info...
FACEBOOK - Connect on my Facebook page here:
/ paintlessdentremovaltr...
Want to learn more about Paintless Dent Removal and how to learn the actual skills you need to get started and be successful in PDR? Then make sure to visit the Learn PDR Online website below:
lpo.li/learnpdronline-2u8

[@golfcon]

Great explanation video for each tool

[@LearnPDROnline]

Thanks, with so many tools available now it can be difficult to know what they all do!

[@SamKing-vz7iq]

​@@LearnPDROnline07

[@edwinmedina4338]

I wanted to start learning PDR about 3 years ago! Wish I would have started sooner. Thank you for the very informative videos 🙏, still understanding why what and when before I commit to buying anything.

[@LearnPDROnline]

Thanks Edwin, I'm glad you like my videos and yes, take your time, its a great career but it takes time to learn it so its worth thinking about, any questions at all just shoot me an email or message anytime

[@fernandoabc01]

Muito bom , mesmo. Fantástico conteudo.

[@rendellbaldwin8946]

Thank you for this informative video.

[@LearnPDROnline]

Its a pleasure, I'm glad it helps!

[@tabasamashfaq1680]

That was very informative Tom, Thank you for your help 😊

[@LearnPDROnline]

Thank you my friend, i'm glad you found my video useful!

[@andytbaynes]

Hey bud I've just bought a cold glue set from Etari £147 including 1.9kg slide hammer 5 metal tabs and 250g of colafria dude its a game changer

[@LearnPDROnline]

Thanks for the suggestions, let us know how you get on with it, always good to hear feedback!

[@monicaescobedo2508]

Great Video

[@lohikarhu734]

NIce...covers ground stuff, I think... I was interested that you preferred the slide hammer, as it seems to me that it requires more "feel" to use, vs. the lifter 'jack', which seems to be adjustable, and gives a beginner more options?? I've seen video swith both, of course, but have only tried the 'jack' type, myself... Good advice on the bars, too. Thanks!

[@LearnPDROnline]

Thanks, the slide hammer and lifter have different effects on the panel, the slide hammer is great for pulling larger areas that a lifter will not cover but you also get a nice 'shock effect' which can be ideal for small round dents to allow you to quickly move across multiple small dents. I think its important to have both but agree the lifter may be easier for a beginner to get a feel for pulling.

[@mullervolker9814]

Can you remove a dent only using glue and knockdown? I have a crease where you cannot get behind with bar in the back wing of an Octavia 1Z3. It is inside the to the panel spot welded reinforcement bar.

[@LearnPDROnline]

Yes we regularly remove dents without getting behind them. it does depend on the dent, how stretched it is etc but it certainly is possible to remove some dents from the outside only. We have a few videos here this channel showing glue pull only. Generally with crease dents i am using dead centre crease tabs with a mini lifter :)

[@pak5119]

how big slide hammer I need?? keco 1 and 2.5 pound weights will be enough or I need something more powerfull??? Thanks (begginer) Thankyou

[@LearnPDROnline]

Hi Pak Keco is a good choice and those weights will be fine to start pulling dents!

[@TonY-ix5nn]

How long should the double bend be?

[@TonY-ix5nn]

Please

[@LearnPDROnline]

There is no set length as it depends on what you are practicing on, how far that damage is from you will determine the best length., however when we start training we usually start with a double bend bar anywhere between 24 Inch and 30 inch in length. 👍

[@danmc2678]

Do you sell a quality kit with the tools you mention? I see kits on Amazon but not sure if they are worth it for the DIY guy?

[@LearnPDROnline]

Hi Dan, we do not sell tools ourselves, I have never tried the cheap kits on amazon my advice would be to buy from a reputable PDR tool supplier such as TDN Tools. Cheaper kits from ebay and amazon may well increase the chance of damaging the paintwork which could cost more in the long run...

[@jcrs6333]

Hello , where you can buy the tools in uk ? Thanks great video

[@LearnPDROnline]

Thanks, here are three of my favourite PDR tool suppliers in the UK - www.pdrprotools.co.uk - www.bletools.com - www.kecotabs.co.uk

[@pak5119]

hi what the length of this bar?? Im a begginer. Thank you👍

[@LearnPDROnline]

The bar length we generally start with is between 24 - 28 inches, this is a pretty good ‘all rounder’ choice particularly if you are just starting to get a feel for the tools, long enough to get good leverage but short enough to still get your head close to the repair to see what you’re doing!

[@sweetfreedomGB]

Good advice, and then like me you'll all accumulate masses of gear over the years!

[@LearnPDROnline]

Ha ha yes I still get excited when I order new tools especially the first time you get to put them to use!

[@sweetfreedomGB]

@@LearnPDROnline ditto..especially with lineboard, my own peculiar problem!

[@fightsandfinance7570]

Is there a lot of money in learning the skill? I kind of fixed my car with the plastic inputs and the glue but I'm wondering if I can go pro would I be able to make good money? I guess for being pro I'll need those sharp things

[@andytbaynes]

Also what about heat gun?

[@LearnPDROnline]

Good spot, I left out the heat gun, this was partly because I wanted to cover PDR specific tools, I usually use a hair dryer or basic hot air gun for applying heat and consider this more of an accessory item but you are right, that should have been mentioned in my video, thanks for the letting me know. Yes some form of heat gun is also a good choice! This can be a hot air gun from a DIY hardware store or a hair dryer from most homeware shops...

[@jcrs6333]

Where can buy tools in uk ?

[@LearnPDROnline]

Here are three of my favourite PDR tool suppliers in the UK - www.pdrprotools.co.uk - www.bletools.com - www.kecotabs.co.uk

[@rodneybooth4069]

Went to a body shop and got a door and gave up after trying to remove dents I put in it. Found when I scrapped it that it was aluminum and not the best to train on.

[@LearnPDROnline]

Yep, aluminium is tough to learn on, steel has a memory so its 'easier' to reform the metal back to its original shape. its still important to learn aluminium but we usually recommend mastering the basic skills on steel panels first, don't give up though just pick up another panel and keep pushing for perfection my friend!

[@MrCbell57]

Your survey page is not working. I cannot sign up.

[@LearnPDROnline]

Hi Rick, thanks for your comment, il take a look at the survey link now👍🏻