Top 5 PDR Tools for Beginners 2024 | How to Choose the Right Kit

[@christophermisiano5769]

Have been a tech for about 8 years now never too late to learn something new. Thank you sir for the info.

[@denttime]

Glad to help and thanks for watching!

[@Terrywaites]

I have just started learning PDR and out of everything I have seen you are by far the most genuine and informative.. Just wanted to say thank you.

[@denttime]

Thanks Terry. Really appreciate it. 👍

[@samsg2987]

Learned PDR since the 90s, stopped for a while and back in 2010, and always some surprise in the field ! Hail is a lot of work, but it is fun to do it.

[@gideghb4909]

I just love your way of doing that job, I starting know about PDR now, and with your help I'm getting passionate. I hope meet you and learn more from yours skills personally .

[@denttime]

Thank you Gide and appreciate the kind words.

[@CGAUTOMOTRIZ]

Thanks Mike, what a master class, i´ve been studying Online Pdr and im about to buy at this point the tools, this video help me a lot. You, devarilleros and autoelite make my professional life better and im glad to find my porpuse in life.❤

[@frankpavan7865]

Thank you Myke. Always important to review the fundamentals even though I am no longer a newbie !❤️

[@denttime]

My pleasure! Thanks Frank 😉

[@SuperFateWeaver]

What are the chances that this morning I decide to relearn PDR, to add it to my detailing business, and then I stumble on a professional who teaches in a way that actually works for me? Thank you for the video, I'll have to look into the classes and the rest of your channel!

[@denttime]

It’s always about the framework and foundation how you learn. Without those two things any business fails. Thanks for the comment. I’m sure you’ll find denttrainer.com to be very helpful in your PDR journey.

[@komplicatedxpressions5396]

Very through and informative. thinking about getting into this field as i have been in the plumbing and electrical field for 25yrs. need another toy to play with as things are getting tight here in the Atlanta area, however its never to late to pick up a great skill set.

[@TheDisgruntledMechanic]

It would be great if you could package the 5 tools and sell them like that. Thanks for the great info!

[@denttime]

Yes I know but I don’t make the tools. Thank you.

[@lisat9707]

You need a shopify store😅 a DT package and im sure ordering repackaging packing and shipping can be handled by a 3rd party. The manufacturers would probably Love to help out with a starter pack and if their name is on it they can also write some of it off as advertising costs. 😊 your on social media now. Online sales are part of it and a great way to make those courses free or at least pay for themselves at a steep discount. Dont dismiss the idea keep it on a post it for future!

[@vladimir1k851]

Very useful video! You are a professional! Thank you for sharing your experience!

[@denttime]

Glad it was helpful!

[@bradrobertson66]

Great content Mike, I have been interested in learning this trade for a while. I will be checking out the course and thanks for taking the time to teach the learned techniques from 30+ yrs.

[@denttime]

Thank you!

[@logicalmalethink4925]

Find an old car hood get a sock and golf ball and a couple tools

[@jameswicker4342]

Great job on the do over. Enjoyed the info!

[@denttime]

Thanks James.

[@infiniti37G]

Ive done some body work before. Nice videos I learned alot and got me some new tools. 💪💪🙏

[@denttime]

Heck yeah. 👍

[@ernestoyap9855]

I want to learn PDR from you mr.myke toledo to be my New Job Someday...your a good trainer❤

[@denttime]

Wow, thanks 🙏

[@Nick-ym8xe]

Thank you very much teacher from Thailand🙏🙏🥰

[@mazzkhan1306]

Welcome Back sir big fan of u ever

[@denttime]

Thank you! 👍

[@gregm959]

I like the idea of learning how to do this properly but i just checked prices of some of these tools. $700au for a light, Average over $100au for any of the bars.. It prices me out of wanting to do this.. I think i might try and make them myself.. Having said that, I do like watching how you go about your work. Cheers

[@denttime]

Thank you for your comment.

[@sithieu9009]

This is very helpful. Thanks

[@HIHaiki]

Amazing i would like to know all about PDR ,thanks for this great informative video

[@denttime]

You’re welcome

[@denttime]

Awesome thank you.

[@biggbossman1130]

Great video… I am really interested in learning PDR

[@denttime]

Thank you. Hope to see you inside of denttrainer.com

[@lohikarhu734]

How about tool suppliers in Europe? KZbin is VERY international, so, if you have any information about tool suppliers in Europe, at least some in your audience will find it very useful. You have a bit of a different style than some folks, but you really do just 'pop in' some great tips!

[@denttime]

Try Keco in the UK.

[@freddensing1224]

great presentation

[@denttime]

Thank you.

[@everett8610]

I'm now learning this its interesting! My business model is for flipping cars.

[@JesusHernandez-xi9jr]

New subscriber love your work

[@denttime]

Thanks! Welcome aboard!

[@luisasantos2500]

Excelente video Mike saludos desde Panamá.

[@denttime]

Gracias. 🙏

[@GadibundhuHouse]

I would love you to explane more about your training eg personal sounds like you teach face to face but do you do vid link ups for people to far away to come to your shop.

[@denttime]

Good question. I’m considering live online PDR training.

[@alexmacchalatte]

I've got an appointment tomorrow and can't wait to get my baby repaired!

[@denttime]

Thanks Alex. Big Jon will see you soon! 👍 -Myke Toledo

[@alexmacchalatte]

@@denttime Big John made my ride look like new again! You guys are the best!

[@denttime]

Heck yeah! Thank you for your business. 👍🙏

[@cornfarts]

You dropped your baby too?

[@skiprofessor5328]

hey Mike, could you recomend the tools dedicated to fix professionaly hail demage for beginner, I want to specialize in hail demage repair, could you share some of the best tools, thank you!!!

[@XinJunPengPDR]

Paintless dent repair is an amazing job, but the right tools for the job are important

[@YNOCORWDO]

I'm not even beginner, I'm thinking about it ATM but I think this video is more "let me show off my tools" than advice what should you get 😂

[@denttime]

Watch the video again without being distracted and you’ll see it’s quite beneficial. Thank you.

[@leebennett3672]

Thank you for your advice 👍👍

[@denttime]

My pleasure!

[@anmarrazzaq4740]

I am a follower from Iraq, thank you

[@cachojuangrisolia]

Muy bueno !! Desde Uruguay !

[@denttime]

Mucho Gracias. 🙏

[@FaithfulStreaming]

I might check out your site. Very detailed and you became legit with the wife insight lol

[@THOR252RACER]

I want to know more about learning from you

[@denttime]

Myketoledopdrtraining.com

[@JaimeAlegria-80]

Master I want to learn this art. please sent some information

[@trailwayfilms]

🙌 thanks myke

[@denttime]

You’re welcome. Appreciate you watching.

[@trailwayfilms]

@@denttime Always 🤛🏼

[@ВладимирКонстантинов-о9щ]

Hello Mike,! I really like your videos, I watch your videos a lot. You have a lot of tools, different companies, can you tell me or comment on the B&D tools tool. If possible, then weaknesses and strengths, please. I am grateful to you in advance.

[@denttime]

B and D have really good accessories. Their latest tip sets are great.

[@ВладимирКонстантинов-о9щ]

@@denttime Thank you very much! You are a super master!

[@CentralMonsters-r2y]

Ok nice

[@Cartec09]

Myke, you lost audio from 32:13-32:54 when you were describing knock down tools. (The most important accessory!)

[@denttime]

Yeah, I forgot to cut that part out but you didn’t miss anything because that part was supposed to be removed. Sorry I was editing it the very next day late at night because it bothered me so bad that the live version really didn’t come out well. But thanks for noticing and letting me know.

[@BrayoTintsAndWraps]

Thank you! Looking to add this as a service. Im unable to access your website,

[@denttime]

Thanks. Try www.denttrainer.com

[@BrayoTintsAndWraps]

@@denttime thank you

[@멍게-h6k]

Are the anson rod and ultradenttools tips compatible?. Where is the anson tip set?

[@gleung711]

Do you recommend a standard thickness whale tail or ultra thin??

[@denttime]

Depends how tight the location I’m dealing with. The tighter the more smaller the diameter.

[@albertomendoza2251]

Hi Mike; Great video. I want to learn about PDR and will check your courses Online, also, wondering if you could share the aprox. (usd) investment to buy basic tools?. Greetings from Monterrey México.

[@denttime]

Thanks. I’d say about $700-$1000 with reflection and tap down

[@howardtoob]

What type of steel are the tools? Stainless, high carbon drill rod?

[@denttime]

Mainly stainless and carbon

[@smody121]

So i want to avoid amazon because theres too much flex in the type of steel they used compared to name brand, but these whale tails are fine with being bent every which way without losing any torque? Would help if you actually talked about the types of material used in these tools and why they matter.

[@denttime]

I have more videos coming out but some are made out of carbon steel and heat treated steel. While others are forged steel.

[@hoangtuvlog3858]

Tôi muốn mua

[@JoseLuis-yp9ew]

Mike , me gustaria que hicieras algun video en español ya que somos una comunidad grande de habla ispana que te seguimos y que no dominamos ingles , gracias

[@denttime]

Gracias por mirar y por tu sugerencia. Agradezco el apoyo de nuestra comunidad de habla hispana. Hicimos un video en vivo como este en español, pero desafortunadamente, la transmisión del video no fue buena. Estamos trabajando para rehacer ese video y ponerlo a disposición de la comunidad latina para que lo disfrute. Mientras tanto, aquí está el enlace al video en vivo anterior donde el audio es bueno y aún puedes aprender de él (kzbin.info/www/bejne/lZqudmVugdSto7M). Gracias de nuevo por tu apoyo. (English) Thank you for watching and for your suggestion. I appreciate the support of our Spanish-speaking community. We did do a live video like this in Spanish but unfortunately, the video feed was not good. We are working on redoing that video and making it available for the Latino community to enjoy. In the meantime, here is the link to the previous live video where the audio is good and you can still learn from it (kzbin.info/www/bejne/lZqudmVugdSto7M). Thank you again for your support.

[@JoseLuis-yp9ew]

@@denttime gracias por tu respuesta Mike , soy argentino pero hace veinte años vivo en las islas Canarias , desde muy joven he trabajado de chapista hasta la actulidad que me he juvilado, tengo setenta y tres años y soy un enamorado de mi trabajo , lo he disfrutado mucho , me apasiona el arte de sacabollo y siempre miro tus videos , no descarto hacerlo ya que a pesar de mi edad estoy muy bien y como te dije soy un enamorado de este trabajo , un abrazo a la distancia y nuevamente gracias

[@ЮрийКосарь]

Майкл! И я бы тоже хотел и знаю, что еще тысячи мастеров бывшего USSR хотели бы увидить видио на русском языке. Спасибо за труд! Я с UA.

[@Taean야인]

Hello Mike! I would like to purchase the tools you recommend and receive training. But I don't know how. This is Korea.

[@denttime]

Sure. You can sign up for my online PDR training here 👉 denttrainer.com

[@mrshep49]

Buy nice dont buy twice is the saying but you were close lol

[@mammutit]

Title 5 tools , video 50 tools

[@denttime]

Looks can be deceiving, my friend. Just because it appears to be a lot of tools, doesn’t mean it is. I only mentioned five main tools, but as they say, “a true craftsman knows the value of accessories.” Thanks for watching 😉

[@onesikm3]

Hey Mike where are you based out of ? I would like to join

[@robertfontaine3650]

Does anyone offer a starter set of good tools?

[@SpiderHamPeterPorker]

Harbor freight, where are you? Overpriced pro tool market ripe to bring down to earth.

[@NPass40]

Could anyone let me know if the kit from dentless touch (made by A1) is any good?!

[@denttime]

With all honesty, all the tools made from A1 are terrific. Just make sure you know how to properly use the tools for the right applications. Best of luck to you. 😉

[@vivernpadiachy3528]

Hi where are u based because I'm in south africa

[@denttime]

San Diego area.

[@ajmac996]

Hi is it possible to learn pdr online

[@denttime]

Yes. DentTrainer.com thanks

[@KitVaughan-z7d]

0964 Hand Rest

[@rayanomar7257]

❤❤

[@goducgo]

Learn how to repair Airstream trailers. Panel replacement is very expensive, time consuming and requires an extreme amount of patience and talent.

[@RalphNathan-z1s]

2075 Drew Well

[@ClaphamEmma]

078 Heber Corner

[@ВладимирКонстантинов-о9щ]

Sorry Myke!

[@denttime]

👊

[@BobbyMaggie-e4t]

Dicki Point

[@ArnoldBooth-n6z]

3815 Taurean Pine

[@wtfheliament]

Pdr intructor...

[@jho-v3n]

Hi mike is your wife a filipina

[@denttime]

She is.

[@bakastrong4381]

Im from Russia, here even when you pay crazy amount of money you dont 10% of the information you gave right now

[@bakastrong4381]

Thank you very much, you are a Guy with a Big heart and value

[@TallStarlite]

How do companies justify $80. for 15 pull tabs that are a few pennies worth of plastic and Don't just say R&D cause PDR been are around a long time ?

[@denttime]

Have you ever had a mold made? You’ll get your answer real quick. 😉

[@garybonz]

If it takes you more than 10 minutes to make your own chain you need to do something else !

[@denttime]

Maybe 🤔

[@duncanmacleod7210]

Mike, brother, don't dance while you talk.

[@denttime]

I’ll keep that in mind 😉 thanks

[@duncanmacleod7210]

@@denttime Forgot to add, this is the most informative channel on the web.

[@aarynarango432]

Well I got some videos to watch then cause I have little experience vs what this man has 😅 I'm a noooob

[@denttime]

Thanks for watching.

[@EricWilliams-y2m]

57733 Eva Plaza

[@hermanschiller2035]

Great video but you're making me dizzy with all the swaying around you're doing. Stand still!