What Materials Can You Cut (and engrave) with Your Diode Laser (like the 10 watt xTool D1)

What Materials Can You Cut with Your Diode Laser (like the 10-watt xTool D1)? Ever wonder what you can cut and engrave with your diode laser? Well, xTool sent me out a ton of different stuff to try. Come check out the results!
Materials NOT to use a laser on:
www.jrlasersolutions.com/PDF/materials.pdf
Check out the NEW WEBSITE: www.builddadbuild.com/
MERCH!! (help the channel out by picking something up for yourself!): build-dad-build.creator-spring.com
DISCORD: discord.gg/Aa749ws
PATREON: www.patreon.com/BuildDadBuild
DISCLAIMER:
Working with Fire, lasers, Electricity and Power Tools is extremely dangerous. Please use caution if you are attempting anything in these videos.
Also, please drink responsibly.
_____________________________________________________
USED IN THIS VIDEO (affiliate links):
xTool:
store.xtool.com/?ref=RyzFeVwU5QGEQ
Use Promo Code: BDBXTOOL for 8% off
Link to all my tools:
www.builddadbuild.com/toolshome
_____________________________________________________
Don’t forget to Like, Comment & Subscribe:
kzbin.info
_____________________________________________________
ADD ME ON:
Subscribe: kzbin.info
Patreon - www.patreon.com/BuildDadBuild
Discord: discord.gg/arnqEt
Instagram: builddadbuild
Facebook: builditburnit
Twitter: builddadbuild
Pinterest: pinterest.com/builddadbuild
TikTok: www.tiktok.com/@builddadbuild
_____________________________________________________
MUSIC:
#builddadbuild

[@jpark108]

this is AWESOME - I had been focused on building a material list that included anodized, acrylic, wood and possibly metal. I DIDN"T EVEN THINK ABOUT STONE. Great explanation on the metal

[@BuildDadBuild]

Thanks, homie!

[@conandlloyd]

Dude, anyone who starts a video with a quote from my favorite movie deserves a subscribe from me! Great content and love the "Real Genius" reference. I'm now binging your D1 videos because I'm ordering mine in 2 weeks.

[@BuildDadBuild]

That's awesome, Conan! Don't forget to use my promo code for 8% off your purchase! store.xtool.com/?ref=RyzFeVwU5QGEQ Use Promo Code: BUILDDADBUILD for 8% off Cheers

[@jpark108]

SO MUCH INFO out there - I am looking to buy the cutter, based on the material I am cutting. Would you say, from a big picture perspective, does the xTool 'engrave' anodized aluminum, acrylic, wood. I think I have the answer, but before making the purchase I want to be certain I'll get what I need to get with it. I am leaning xtool D1 Pro. New follower - love your stuff so far.

[@BuildDadBuild]

You should get great results with all of those materials. If you are looking to do any other metals though, I would look at a Fiber.

[@readingcraze7283]

Great video . I have one question if I am cutting 3mm or 4mm chipboard or wood and my cutting is very fine . The question is will 20w cut more clean and Sharp than 10w?

[@BuildDadBuild]

Yes.

[@ThroughLegends]

Good afternoon, Sorry for bothering you, I bought same laser you have stool d1 pro I try 100 times to engrave on stainless steel but didn't work I use xtool program But I don't know how to use the right sittings I try to follow all tip on KZbin but not working 😞 could you please give me some advice or screenshot of right setting or video Best regards

[@BuildDadBuild]

Sounds like you need to focus your laser. And confirm that it's actually Stainless Steel you're trying to engrave.

[@hughpitzer2075]

I'm curious if it can cut flattened out aluminum soda cans? The aluminum on soda cans is super thin. Also, would it be okay to etch designs onto spray painted metal?

[@BuildDadBuild]

Diode lasers cannot cut metal. Yes on the painted metal...folks do it all the time.

[@mattwarden8322]

Hey buddy I'm over here in canada been working with my d1 been having a few issues with using other software currently using xcs love your videos but I'm stumped

[@jasonmorales4990]

Hi Nick just woundering if a 20W laser can possible etch, not engrave, metal.

[@frankfuller5210]

Hi Nick Thanks for all the help this laser newb really appreciates it! What Xtool would you recommend for doing strictly pictures and portraits? Thanks again

[@BuildDadBuild]

Probably the 5 or 10W. Smaller laser dot...

[@bastiansondermann2804]

Hi, I just discovered your channel. Awesome stuff!! I am very new to the topic of laser engraving. I want to engrave some labels on to a rack panel, which is made of 2mm steel sheet and has a layer of thick powder coat on it. Is this possible with a diode laser and if so, what optical power is required? Thanks in advance!

[@lydiabeyer9985]

Great videos. I'm currently trying to engrave a stainless steel zippo that just refuses to mark! I am using the dry moly, xtool d1pro, lightburn, settings are: speed 7 in/min @ 100% power. Do you by chance have any troubleshooting tips on why the metal won't mark?

[@BuildDadBuild]

I have not had any success engraving Zippos.

[@lonewolfcrafts4599]

Hey Man, watched all your videos and got me hooked. Love the way you do them (you remind me of my father LOL) Currently have a CNC cutting wood. this will add to my hobby. Ordered the Xtool D1 10 watt today using your link to help you out. Keep them coming. Great job.

[@BuildDadBuild]

Thanks brother! You'll dig it!! Cheers

[@IZ4U2nJOY]

I customize Hot Wheels/Matchbox and as wondering if this would engrave or discolor diecast like in the saw blade you showed at the end of this video with an X-Tool D1 Pro?

[@renadegutis1540]

Could you give some baseline to cutting paper? I have a 10w pro and want to cut scrapbook paper. Thank you

[@BuildDadBuild]

You'd have to run a speed and power grid. I really don't know. XTool has some suggested settings on their website. www.xtool.com/pages/material-settings

[@tonyttiger5554]

Can you do polymer magazines?

[@BuildDadBuild]

I'd have to run some settings tests, but I'm pretty sure. You can laser engrave polymer for stamps. Cheers

[@builderjake8991]

I'm having issues with this connecting to my laptop... I've had this thing for a week and I've only been able to engrave 3 items. Ran updates and other things but still no go. Have you experienced this?

[@BuildDadBuild]

I have never experienced connectivity issues. Check with the official D1 Facebook group.

[@drewbdoo_]

Hey, I recognize that Harry Potter house logo. Almost like I suggested it. Hahaha that did a LOT more than I anticipated. Sweeeeeet!!!

[@BuildDadBuild]

LOL I think you were there when I did it. Cheers

[@drewbdoo_]

@@BuildDadBuild I was there indeed, but had to skip out before you were done with the blade.

[@behamiltonsrful]

Hey brother, I hope you are doing well. I finally got my extension kit and my 20W upgrade for my laser. While cleaning up, I found an old box full of different Styrofoam blanks I was saving in the attic. My question to you in, have you cut Styrofoam with your laser? I ma assuming there may be a smell/fumes involved I would have to be careful with and I am certain probably would need my air assist on. Second question is, I see an option in Lightburn to turn on the air assist. Do you know of any hardware I could connect Lightburn and my air assist to to make it turn on automatically? Thanks in advance, your channel really helps noobs like me... :)

[@BuildDadBuild]

I think styrofoam is one of those things to not cut with a laser, but you can look that up here: www.troteclaser.com/en-us/learn-support/faqs/unsuitable-materials-laser-processing And I think that option for air assist is for CO2 lasers, but there could be like a Raspberry Pi solution or something. Cheers

[@behamiltonsrful]

@@BuildDadBuild Clinkies my friend!

[@anniegrider5547]

You can actually etch on stainless steel after coating the surface with mustard (or possibly vinegar--haven't tried it yet). My uncoated stainless steel attempt (with just a 5w laser) also caused smooth metal discoloration but the mustard coating actually created a rough surface.

[@BuildDadBuild]

Awesome! I have a video coming soon with another cheap way to mark metal! Stay tuned! Cheers

[@HalfAssHomestead]

Try Brilliance spray. You'll love the results. And it washes off with just water.

[@jasonferderer]

Can u do she'll casings with a diod laser. I'm struggling with it

[@BuildDadBuild]

Only with a marking spray

[@rbeto1]

Great video, awesome amount of info!

[@nicolelamarca3111]

Will this cut lucite/plexi? I'm looking to make wedding & party favors. Don't know where to start.

[@BuildDadBuild]

If it's clear, the answer is no. Cheers

[@barretthamilton2565]

I am wanting to cut really think (.010) Brass sheets. Do you think the D1 will do that? What issues might I have? I am assuming I would have to mask the sheet. Wanting to make a Hell Raiser Puzzle Box replica, wanted to do the patterns on the side out of thin brass sheets I can pick up at hobby lobby

[@BuildDadBuild]

Can't say for certain. I would say it definitely isn't the best tool for the job.

[@ImaginationDesign]

Yeah, I'd been thinking about one of these since I saw someone etch AA scales (I have no idea what setup was used). What you did on the sawblade was KEWL and now I'm thinking of where can I put this. I'll probably get more use out of it than a new bicycle.

[@Xotiw]

Would you be able to cut 1mm thick silicone with those kind of machine ?

[@BuildDadBuild]

I have never tried it. But I believe so. Cheers

[@meharsinghsethi4180]

Your Awesome I’m going to buy this but gotta ask how about plastics ? Like can I do pens and other plastics on low setting ?

[@BuildDadBuild]

It depends on the plastic. Some are engravable, some are not. On untested materials a lot of it is trial and error...LOL Cheers

[@meharsinghsethi4180]

Understood I’ll try some and give it a shot ! , you gave the confidence to try this for my mailbox business ! God bless bro

[@jasonfarrell5118]

D1 pro, can you do white gold? Wondering if there is a process for it

[@BuildDadBuild]

No.

[@joshandsarahstallings7708]

15 seconds into your video... I could party with this guy.

[@BuildDadBuild]

Cheers!

[@mikeledee8786]

I buy galvanized cut designs from Dollar Tree, they have several. Can I engrave on that type of metal? Thank you

[@BuildDadBuild]

I can't say for certain without testing. You should give it a shot! Cheers

[@Revelation_Overland]

I have the d1 5w, will it cut metal? And if so what kind and how thick? Thanks

[@BuildDadBuild]

No

[@BTeehanKnives]

Can you engrave polymer, like a Glock frame?

[@BuildDadBuild]

Depends on the polymer

[@claytonjames4779]

why is it so hard to see if someone can engrave a painted tin container like for candles or pen holders? I should test it and upload a video since nobody does it when my laser comes in tomorrow

[@BuildDadBuild]

If it's painted or powder coated it should work fine.

[@thecarnager1949]

You have any idea if it will cut and engrave mdf? Great video, I think I might pick one of these bad boys up

[@BuildDadBuild]

Definitely will engrave MDF. Cuts thing MDF, struggles with thicker... Cheers!

[@samuelruzza6938]

Is possible to engrave Nickel steel? thanks a lot for this videos, are really helpful

[@BuildDadBuild]

I don't think you can mark nickel with a diode. But, not totally sure!

[@lorianderson9732]

Wondering if you can engrave or cutout Hardboard Tempered Panel 1/8 inch thick?

[@BuildDadBuild]

You can cut 1/8" mdf. Not sure about hardboard Cheers

[@melic76]

have you tested felt eva foam ? and can i engrave on a laptop case i have the d1 pro 20 watt ? thank you for your videos ..

[@BuildDadBuild]

I haven’t but you can cut Eva foam with a diode. And yes it will engrave a laptop.

[@michaelstein8709]

Where did you find the dearth address star wars circle you cut out? Beautifully detailed

[@BuildDadBuild]

Google. Search Star Wars aztec calendar

[@lynetteloreno7273]

Having the hardest time aligning mine, any tips??

[@BuildDadBuild]

One of the best tools for alignment I've seen is this: alivepixelcreates.com/product/honeycomb-material-alignment-tool/ Hope that helps! If you have specifics find me in Discord: alivepixelcreates.com/product/honeycomb-material-alignment-tool/ or email me [e-mail] Cheers

[@JoeL-sc4cy]

I used your link to order the D1, thanks for the discount. Saved me the taxes. Can you post your xTools D1 10watt materials list file. I would have thought that Light Burn or Xtools would provide one as this would help accellerate use.

[@BuildDadBuild]

Here's a copy of what's on their website: cdn.discordapp.com/attachments/664971419506966538/943584320055025744/Material_settings_file_for_xtool_material.pdf Cheers

[@MrTigg93]

I'm looking for something that can cut 20 gauge metal.even if it took more than one pass..can a diode do this?

[@BuildDadBuild]

No. Get a plasma table or a metal cutting CNC

[@treymurphy1484]

Does the software work with other lasers as well?

[@BuildDadBuild]

Lightburn works with other masters. XTool’s software does not.

[@MEGATRON-pw9oc]

Liked and Subbed!!! Have you tried engraving a photo into flat glass using XCS?

[@BuildDadBuild]

Haven’t tried yet. But stay tuned.

[@pauljensen7518]

can i laser engrave with x tool d1 20 watt onto brass? like a rifle casing? if so, how? thank you

[@BuildDadBuild]

No

[@Utahcommander]

I need help, just started, and I keep getting lines on the outside of my text. I've messed with my speed, power, and mm/s but I keep getting lines. just even on the test wood that comes with it. what am I doing wrong?

[@BuildDadBuild]

That sounds like loose belts. Make sure your belts are tight! Cheers

[@Utahcommander]

@@BuildDadBuild ill go check them now. I'm really appreciative of your videos and feedback, doing my best to figure out light burn and this new xtool d1. I'm pretty excited and literally searching your videos every time I have a question! thanks!!

[@seans.111]

Would you please publish your material library here?

[@BuildDadBuild]

I don’t have one.

[@flmoose1]

What "carrier" did you use on the glass?

[@BuildDadBuild]

Cold Galvanizing spray

[@jackking8026]

I’m trying to use my laser on a bicycle cassette gear which is nickel plated steel. What process do you think I should use? I tried 3 passes with dry moly lube and 3 passes with cold galvanizing compound. The lettering wipe off with both. I might have to go with the Ceremark spray huh?

[@BuildDadBuild]

I would try Enduramark...because I can get it for you cheaper! enduramark.com/ Promo Code: BuildDadBuild for 20% off all products Cheers!

[@jackking8026]

@@BuildDadBuild Bought and waiting for delivery. Thank you.

[@mikecrase3047]

Can you engrave same materials with an Ortur 15 watt diode laser. I enjoy your videos and thank you.

[@cptbuiltk7944]

My aufero 2-4 LF burned out the laser in 20 hours. Ortur is sending a replacement but wanted to slow ship it 4-6 weeks from China

[@BuildDadBuild]

Mike. Mostly yes. Settings would be different. And You might have to do multiple passes to get the same results. Cheers

[@mikecrase3047]

@@BuildDadBuild thanks

[@kevingauthier3745]

Will the D1 cut non-black acrylic? I know diode lasers can’t do clear, but can it cut 1/8” opaque red acrylic as an example?

[@BuildDadBuild]

It will. I just didn't run the cut on that piece. There was a whole issue during a live and I took it off the bed before the cut by accident. Cheers

[@chrisvelazquez8281]

Can you do basic gun engraving with this ?

[@BuildDadBuild]

Depends on the material.

[@gregbrinkley520]

What are you settings to engrave wood with a clear coat finish

[@BuildDadBuild]

Normally I use the basswood settings on unfinished wood. Cheers

[@dakiniagency]

Thanks a lot for this great video. I cant find any information anywhere if this laser cuts synthetic holographic leathers and double sided sticky tape. WOULD LOOOOVE to hear your perspective on that !! much love from germany

[@BuildDadBuild]

You need to check the MSDS and reference it against this: www.troteclaser.com/en-us/learn-support/faqs/unsuitable-materials-laser-processing/ Cheers

[@dakiniagency]

@@BuildDadBuild thank you very much!!! 💖

[@All6sand7s]

I just ordered mine! It came in yesterday but I'm having trouble getting my computer to connect to the machine. Any advice? I'm using a mac

[@BuildDadBuild]

Check your COM ports. Try plugging it into another USB port, then turn the laser off and back on. It should find it. Cheers

[@batmanwatchmanwatchman8113]

Would you be able to laser print on marble? I work in construction and want to recycle some of the materials. Thank you for the video it was really great!

[@BuildDadBuild]

Thanks, brother. I think you'd need some sort of medium in order to print on mable. Cheers

[@knightfyrrt4740]

I have been seriously contemplating the idea of purchasing the X1. I work a lot with car customizing lights mostly. Love the acrylics and glass options. But I do alt of work with headlights. A lot of customers want engraving on the actual projector lenses. At the moment I reverse cut vinyl and sand blast. My question is what are the chances of laser engraving a pic on them. ( the back of the lenses is flat but fish eyed in the front )

[@BuildDadBuild]

What is the material?

[@keenumman1]

How does it do on aluminum, does it discolor or does it actually remove material

[@BuildDadBuild]

I can't even get it to mark. Cheers

[@sally969]

any idea why the laser head light light up although it is in WORKING mode? i cleaned it with a q tip and it worked but the next day...blah thanks!

[@BuildDadBuild]

Not off the top of my head. But check into the Facebook Group for the D1, great help in there with things like this. Also xTool usually responds quickly to issues like this. Cheers

[@R1Flem]

Have you tested engraving Titanium? I’m interested in engraving titanium tubing. Thanks.

[@BuildDadBuild]

I haven't. Where can I get some titanium on the cheap? Cheers

[@dianab1045]

Is it safe to say that with the xtool D1 you can only engrave metal or stainless steel? I cannot cut it?

[@BuildDadBuild]

You cannot cut metal with anything less than a high powered fiber laser. Or plasma table. Cheers

[@burr028]

Do you know if this will contuor cut? patches?

[@BuildDadBuild]

I don't see why not.

[@morgjg2004]

What do you think between the 20w xtool vs the 20w atomstack?

[@BuildDadBuild]

I dislike all things Atomstack…so ya know…

[@morgjg2004]

@@BuildDadBuild boss you gotta share the wisdom. Why you dislike atomstack?

[@RacnJsn95]

I don’t know what that saw blade is made out of, but you can “etch/engrave” direct to SOME metals, such as 4130 or anything with a heavy Molybdenum content.

[@BuildDadBuild]

Interesting. Good to know. Trying some more testing with Dry Moly. Cheers

[@jerryhill7133]

I’ve been playing with the idea of getting an xTool D1 with the primary goal of engraving 10mm Baltic birch and then filling the engraved areas with epoxy resin. I see the Harley engrave you did in this video: my question is, can this thing engrave like 5-7mm deep into a 10mm piece leaving a decent depth trough to fill? I can’t seem to find an answer to that question.

[@BuildDadBuild]

Theoretically yes. I would think it would take more time than you'd like to spend because you'd be doing multiple passes. And engraving over and area over and over like that could start a fire. For the application you're looking at, I think a CNC would be a better option. Cheers!

[@jendavis78]

I’m so impressed with how well you center your designs. I’m having trouble understanding how to center and also how to know exactly where to place my material in the laser bed. Any tips?

[@BuildDadBuild]

I always try to place my material as close to the center of the bed as possible. And if I need to center a design I make the origin point the center instead of the upper left and star from there.

[@jendavis78]

@@BuildDadBuild ok definitely practicing! Thank you

[@serenacorona5829]

Having trouble getting the settings right for cutting through 5mm poplar. Any suggestions?

[@BuildDadBuild]

Run a power grid. 👍🏻

[@JohnJohn-tu8jo]

Would I be able to engrave gun parts??

[@BuildDadBuild]

You can mark (not engrave) some metals and it looks better if you use a transfer agent. If you want to engrave metal you'll want to look at a fiber laser. Cheers

[@EdYglesias777]

I would love to work side by side with you to learn more about the D1 20 watt

[@barryhenshaw9321]

Great vid thx, I think you've awnsered my question about engraving metal with the D1. So, engraving is deeper than etching then, is that with a 5, 10, or 40 watt laser?

[@BuildDadBuild]

This is a 10 watt laser. Marking is different that engraving / etching. Stay tuned. I'm dropping a video soon that shows a cheap way to mark metal with a diode laser like the xTool D1! Cheers

[@barryhenshaw9321]

@@BuildDadBuild I looking forward to your vid, thx Dad

[@homeinrussia]

I think I might be subscribed to 5 channels, I just subscribed, you're awesome!

[@BuildDadBuild]

Awesome! Thank you! Cheers, Joe!

[@brentf9616]

Great stuff fellah thank you. For the star wars disc, where do you get these templates to start out with? Just got my ortur and can't wait to get started.

[@BuildDadBuild]

Glad you dug it! Check out this search, and go from there. duckduckgo.com/?q=starwars+aztec+calendar&atb=v152-1&iax=images&ia=images Cheers!

[@brentf9616]

@@BuildDadBuild oh man that's so cool. Thanks alot!

[@tegheim]

Have you tried anodized aluminium??

[@BuildDadBuild]

Sure have!

[@tegheim]

@@BuildDadBuild how did it go? I'm thinking about getting a diod-laser to mark my products.

[@tegheim]

@@BuildDadBuild kzbin.infoRGRVIYtMhSg?feature=share

[@RSmedia702]

Have you ever cut g10 garolite with the machine?

[@BuildDadBuild]

O. It has epoxy in it. Epoxy = hazardous fumes

[@RSmedia702]

@@BuildDadBuild It has a non Toxic fume but very abrasive dust :/ I use to cut it with a co2 laser, and also waterjet, but I am outsourcing the material to machine shops.. Miss conception of the material I was actually on the phone with the maker of the material earlier today to find a route to cut it.

[@ShyneflowLC]

How long do these lasers last before needing to replace anything ? Not sure if the diode requires replacement after so long etc.

[@BuildDadBuild]

Depends on a lot of factors. How often you use it. Keeping it maintained. Environment, etc. That being said, all diode lasers wear out eventually. Cheers

[@ShyneflowLC]

@@BuildDadBuild thanks brother, I appreciate it.

[@danmiller81]

I am having trouble dialing in cut settings for 5mm poplar. I have tried various material tests from etsy and the powerscale feature in lightburn and every time i think I have it dialed in and cut something it doesn't cut evenly. Any advice?

[@BuildDadBuild]

It almost sounds like your surface isn't level. Make sure to level your cutting surface. I have inadvertently had something under one of the sides of my honeycomb and messed up cuts because of it.

[@serenacorona5829]

Same.. I am having trouble finding the correct setting to get the cut all the way through the poplar. Any advice?

[@dpooley8583]

Can you cut fiber paper with this laser?

[@BuildDadBuild]

I don’t know what fiber paper is?

[@dpooley8583]

Semi Soft FiberFrax Fiber Kiln Paper 1/8" Thick Sheet It is used in a kiln when working with glass.

[@BuildDadBuild]

Dunno.

[@jacobdean94]

do you have a laserbox test file for power and speed? Cant find one for laserbox basic

[@BuildDadBuild]

I do not. I've run a couple of my own, but I haven't saved them. Sorry. Cheers

[@86holt]

Nice Real Genius quote

[@BuildDadBuild]

Noice. You my people!👍🏻👍🏻

[@scarlethascencio2700]

Puedo cambiar mi diodo de 5 w por uno de 10 w ..gracias ?

[@BuildDadBuild]

You can upgrade to the 10, yes

[@thentantt]

Have you tried cutting cordura fabric?

[@BuildDadBuild]

I have not.

[@thentantt]

@@BuildDadBuild Roger. I been curious on it.

[@LordRahl74]

Just bought this.. waiting on delivery

[@BuildDadBuild]

You'll dig it. Let me know if you have any questions. Cheers

[@HGANGHONY]

How is it cutting EVA foam?

[@BuildDadBuild]

I've heard it cuts well. Haven't tried it yet. Want to take a look and make sure you're not cooking something toxic. LOL Cheers

[@howdydoody30204b]

In your opinion, is the lack of limit switches and, therefore, homing ability a big issue for the Xtool? At this level, that omission seems a bit strange.

[@BuildDadBuild]

I don't really have an issue with it. Where you may run into issues with it is if you have jig and set it up to zero in reference to the jig. The Aufero Laser 2 does't have limit switches either. I think they're trying to make the machines a little more user friendly and less intimidating. Cheers

[@howdydoody30204b]

@@BuildDadBuild Thanks.

[@howdydoody30204b]

@@BuildDadBuild I think that, with jigs, since you want to be able to remove and replace them, I would just put a couple of reference marks on the jig with the pattern and then line those up for each use. Then I suppose I would tape it down for the duration of the run. Just thinking out loud.

[@gregbarneycastle7576]

Can you engrave/etch on pistols?

[@BuildDadBuild]

Depending on the material. Working on a video on how to actually mark metal.

[@HeggenHomeGoods]

Got mine and absolutely love it!! Keep up the awesome vids.

[@BuildDadBuild]

Noice! Will do!!

[@MrDtoll2002]

NO! I had that dream!!! they were Dill Pickles!!! I was so scared!!!!!!

[@BuildDadBuild]

That'll do it. LOL

[@sandradurant237]

Love your videos and your warped sense of humor! How about 6mm MDF? Any cut/engrave settings you can offer this gal? Using a D1 with an enclosure and exhaust - no air assist yet. Thanks! Keep up the good work!

[@BuildDadBuild]

Thanks! Can't say I've cut 6mm MDF (it stinks) yet. But I'm sure I will soon. Cheers

[@hmanohar7634]

interesting what is the cost machine

[@BuildDadBuild]

Depends on what machine you’re looking at. Here’s the link: store.xtool.com/?ref=RyzFeVwU5QGEQ

[@duster.]

Great video, thanks. I'm hoping to get one of these as my K40 Chinesium C02 laser is malfunctioning. I just need to negotiate terns with she who must be obeyed. ; )... Subbed.

[@BuildDadBuild]

Welcome to the Fray! And good luck with the...you know....negotiations...LOL Cheers

[@Traitorman..Proverbs26.11]

Tell her that climate change requires all of us to save on CO2, and that changing to a diode laser will save lives.

[@duster.]

It arrives next week guys! 💥

[@mariarotaed.d.5292]

Do you know if it can engrave on ceramic?

[@BuildDadBuild]

You can...but you need to use some sort of carrier agent to coat the surface first. So it doesn't exactly engrave, but burns the topcoat onto the image. See the two videos below. The first is etching on white tile, and the second is on glass. You'll see the types of material you'd need to use. kzbin.info/www/bejne/g2bJe6mMZs6Klck kzbin.info/www/bejne/fYDFqXmXfdaIZ6s Cheers

[@Beerme-pl2ml]

Can the 5w discolor stainless

[@BuildDadBuild]

I do not believe so.

[@pixieloco]

can you engrave HDD platters?

[@BuildDadBuild]

Don't see why not.

[@pixieloco]

@@BuildDadBuild yay 😄

[@darrelldillard4030]

How do you etch on or engrave on clear acrylic?

[@BuildDadBuild]

I think you need to paint it.

[@aspartan2]

Get a sheet of steel as a backer, spray paint the sheet metal with rust Oleum dry galvanizing spray, once dry, lay the acrylic on top of the sheet metal and laser away... I set mine (d1 10w) to 25% power and 55mm/s... It'll cause the paint to permanently transfer to the plastic... Good luck!

[@Rob-hw5wr]

what do you use for a program on your computer?

[@BuildDadBuild]

I use their proprietary software, Laserbox. For more intricate stuff, I still use Lightburn.

[@moisescontreras1168]

They all look really good Great job 👏 🍻

[@BuildDadBuild]

Thanks, Mo!

[@flanikent]

Been along time since I've herd a Real Genius quote

[@BuildDadBuild]

Yay! I'm bringing it back! LOL Cheers

[@joecornejo7454]

do u think this can cut (LP) album?

[@BuildDadBuild]

Hey Joe! Do not cut vinyl with a laser. Very harmful fumes. Cheers

[@joecornejo7454]

@@BuildDadBuild even if its out in the open outside? CHEERS TO U

[@BuildDadBuild]

The gases can actually harm the laser and the belts as well.

[@philoara5647]

Superbes vidéos ! J’adore !

[@andreww6738]

Great content Mr. Just new to your channel, look forward to more stuff. I have a 15w Ortur, am I guessing correctly that since mine is also a diode that these samples you provided will turn out pretty much the same? Anyways thanks for the I fo, see ya soon. Andrew

[@BuildDadBuild]

Similar. It's all about tweaking the settings for your particular machine! Cheers

[@ashleyalaine1]

What woods do IKEA use?

[@marliprivett4904]

can a pitcure from zedge be done

[@BuildDadBuild]

I'm not sure I understand this...

[@marliprivett4904]

@@BuildDadBuild can i take a putcure from zedge that i have saved tonmy phone an use it for a engraving

[@BuildDadBuild]

I don't see why not.