Battery Powered Airbrush | unboxing and spray test

[@AirbrushAsylum]

Want to learn more about the battery Powered Airbrush 🤔 then take a look at this playlist 👉 kzbin.info/aero/PLkd3s0ymmV0N1d9PPr-Ti7QhIGbcuhbj1

[@jessicab9249]

Could you please demonstrate how to clean it properly?

[@qwerty32185]

thank you so much!😁

[@CinemaMacabro]

As someone who been airbrushing for 20 years, I bought one and love it, great to make a detailed sketch before laying out base colors, and detail afterwards, I hate being teethered for many years, I wish there was a more powerful one that can handle an airbush with a trigger

[@jasonarce5169]

I bought this kit for priming miniatures. So far I would say it's great for beginners and painting away from home. And it's super quiet. It's not the first choice for a professional, but can't see why a pro wouldn't want 1.

[@Rantalanta]

Although im considering this for miniature/model painting purposes seeing the brush in action like this, on a canvas. It definetily helped. This has been the most in depth review/display of its capabilities. So cheers for that.

[@patrickkavanagh7371]

Thanks for actually testing it out so many people just show you what it looks like out of the box.

[@saltysteel3996]

This looks like something useful for rock chip touchups on vehicles.

[@OFFICIAL_DSR]

I think you’d want something more heavy duty if you do it for a living, especially if your running 2k solvent based paint through it, but I get what your saying

[@MikkoRantalainen]

Very interesting product and it seems surprisingly good. Very nice to see dual action trigger here, too.

[@LarrylCutz]

If you own these, try not to use alcohol as much for the " cleaner ". After a day of use, & its time to clean it, hold down on the spray as you refill the cap with water ( 3+ full caps Of water aka 3 cycles ). This should help get the paint out, but will still have paint inside. When you run it through with alcohol, the alcohol dries out the leftover paint inside. Over time or even within a day, it'll clogged. Instead of using alcohol, I just spent the couple $ to buy " airbrush cleaner fluid ". ALSO, when you take it apart and clean it, for some reason if you try to spray and nothing comes out, try playing with the tip of the nozzle in the front where the paint dispenses. ( as you spray , loosen/tighten the front nozzle until you see it disperse paint ) Took me days of trying to figure this solution out & almost going on to buying my 2nd replacement until I figured it out. Hope this helps anyone with a cordless airbrush.

[@vincentferrari]

Can confirm. The backwash the water method is the best for cleaning these. I bought a second one after ruining the first and it's worked perfectly ever since with only water.

[@tylerkadle2833]

I got this for barbering and where I really wanted to get the best one on the market (the tomb 45 compressor) this one was affordable for me to get my enhancement practice started and it works like a gem

[@encara1]

Hey everyone I am buy two or three so I can the work flow going ang charge the extra as I keep working. Always be ready and I suggest buying a portable " phone charger" to keep one charged as you go! Thank you, Great content!! 👍👍🎉

[@hughsherer8747]

Interesting way to mix the paint. Never thought of that. Most people premix then pour into the reservoir. Good tip.👍🏻

[@heromedley]

the amount of control you get on this one compared to the cheaper battery powered airbrush is actually pretty neat.

[@keiron99]

Thanks for this informative review. On the back of watching this I bought this model from Amazon UK (albeit under the brand name DIYARTS). The 'instructions' - which appear to be for exactly the same METU-30 model - state that you get 40 mins use (rather than the 1.5 hours in your instructions). Seems like they may have updated them. This is the first airbrush I've ever had so I've nothing to compare it with. What I will say though is that my fingers absolutely killed me after just 5 minutes of use. I'm sort of regretting not getting one with a separate compressor which I think may be easier to handle.

[@knickersbrown]

You could probably get a air hose to go in between the gun and battery pack. Imagine it would be like a hose off a foot pump. Could work. Am looking at getting one of these.

[@wvjeepguy8178]

Yep, can run an air hose while sitting on the compressor. Double the fun.

[@johncater7861]

Does it make any difference whether you are using lacquer or acrylic or enamel paint or just plain hobby paint?

[@TaintedMojo]

Better than I would have expected

[@qwerty32185]

thank you so much for doing video about this, now i know, something about buying this😃

[@AirbrushAsylum]

Glad I could help!

[@brandielee7971]

Ive been looking at these to get me started airbrushing dnd minis

[@dr.decker3623]

these things are garbage,.. either get a compressor with a small tank, or use brushes

[@codycooper6256]

@@dr.decker3623 could you elaborate please? Why are these garbage. (new mini painter here looking for airbrushes)

[@cesaraugustogalleracavalca5723]

this model, is it possible to open it for future battery replacement? equal an iPhone, the battery is internal, but it is possible to change it by disassembling the device ....

[@bubbapipe]

Wondering if you could put a higher quality brush on to the battery? Battery could be handy if a better brush could be screwed on to it.

[@AirbrushAsylum]

Yes I will be testing this, SprayGunner have informed me that the PS770 fits so I am assuming that you can hook up other brands as well provided they have the generic air fitting 👍🏻

[@StephenCole1916]

I was able to adapt a couple of iwata High Performance Plus airbrushes to this pump. Both the HP-C Plus and the HP-BC1 Plus. I did need a slightly longer trigger for the HP-C Plus for it work reliably.

[@robertcloosterman9336]

Is the battery pack and pump heavy to hold onto for longer periods of time? 600mah battery is not large but combined with casing and 6v motor adds weight. Heavier than an air lead. Noticed it might be more comfortable to hold steady ???

[@MrCcfly]

they got 1300mah models under same name

[@AirbrushAsylum]

You do get used to how it feels , I still use my traditional brushes this is just a great option for someone who needs the airbrush for scale modeling , miniatures and backgrounds (even though it can be used for artwork) but that said it’s totally up to you 🤔

[@Photoshopuzr]

Was looking for a video on this device. I’m going to use it for hair enhancements. You think this will be great for it? Is sure looks amazing.

[@JomasterTheSecond]

Eeeeyep, that's sold me. Totally grabbing one'a these to do colour gradients on my model kits.

[@minkles1330]

Thanks for this.... I've started getting into model kit cars and I wasn't sure whether to go down the cheap automotive spray can route or pickup one of these bad boys. I can't justify spending $16 on a tiny spray can from Tamiya.

[@xolter1013]

nice, might actually buy it for christmas :)

[@hightde13]

Is the bottom connector standard at all? Could you use the supplied airbrush with a normal compressor, could you use the battery/compressor unit with any airbrush?

[@AirbrushAsylum]

Thanks for your comment take a look at this video where I connect other brands to the battery compressor and show you how it’s done kzbin.info/www/bejne/f2banIaii6iLnck👍🏻 the airbrush that comes with the unit has a similar connector setup to iwata so it ‘should’ fit with any of those connectors hope that helps .

[@jaimehernandez6956]

Can I also use it to customize shoes ?

[@AirbrushAsylum]

Sure can 👍🏻👍🏻

[@Retaunted]

I've been thinking about getting one of these so I can do artwork on the go eg, nature & landscape

[@dr.decker3623]

take a picture and bring the image home with you,.. you really think you can airbrush outside? try this,.. turn a fan on low and face it towards your project and see how horrible of an idea that was lol ... these things are garbage,.. either get a compressor with a small tank, or use brushes

[@lovetolearn5253]

Did you get one? If so how did it perform?

[@AirbrushAsylum]

I think if you take this on-site with you and you do a majority of your landscape using brush work and airbrush the backgrounds shadows and highlights with this unit then that will work fine. You can work outside with an airbrush, I have airbrushed at numerous shows outside and it’s no issue providing it’s not super windy (obviously) 👍🏻😉

[@tomatoes3]

Congratulations on the quality and video work, at last a review with out damned back ground music and filmed so well. I notice you appeared to have no tip drying, was that an ink you were using ? Thank you .John .

[@AirbrushAsylum]

Thank you so much and glad you enjoyed the vid , the paint I was using was trident waterbased airbrush colours and you are right, they have minimal tip drying here is a vid showing you how I optimize and mix them 👉🏻 kzbin.info/www/bejne/n5rTmpuur9SNisU

[@TheGryxter]

I wonder how it is for weight? Is it any heavier to hold than a hose connection. I noticed you were using both hands to hold it. Is that the way you would use a regular hose connected airbrush? Or was it heavy so you needed 2 hands? Not a critique, just trying to get as much info before buying. Thanks!

[@benblankenship5892]

That’s cooooooooooool as crap!! I’ve looked at them over and over and wondered how good they performed ya know. It definitely be ideal for when people are transporting motorcycle tins or panels and when they get to their destination they notice a imperfection or if like you said forgot a highlight or just need to touch up things that may happen in transporting artwork. Also like you said bout havin different colors in a couple and you have a small piece of art or say at a show and pumpin out artwork quickly it’s ideal. I am definitely goin to get one of those!! And as far as Spraygunner goes, that’s who I use for ALL MY airbrush needs. Especially paints. I jus got a Createx Illustration Box A set that had like 16 colors, and a 4 bottle additive sampler kit(4012/4020 reducers, 4030 balance clear, and 4008 restorer) all for 70$!!!anyway thanks for the informative video again!!

[@AirbrushAsylum]

Thanks Ben glad you found it helpful and yes , I hear you in regards to transporting items I have had small things that needed touch ups just before clear where this would have been invaluable and for the price it’s a total no brainer . I also heard from SprayGunner that you can hook up other airbrushes so super keen to give that a go 👍🏻

[@abcando1]

*

[@Dragnmastralex]

no link to the product used? does the unit get hot with time? does the battery have overcharge protection (shuts off when full)? can we buy a spare battery to exchange for projects that will take over 2 hours? can it be used with any air brush? is it double action or single action?

[@alexekers3870]

Do you think this would be ok for model aircraft?? Looking at airbrushes but don't want to break that bank just starting out thanks

[@moroleonaers5479]

Can I use automotive paint with it? to fix up a car body?

[@nikklaren]

How's the battery holding up?

[@dazthemod69]

I’m waiting for this to arrive. I bought it from spraygunner based on your video. I’ve seen the same looking one on amazon at a cheaper price, but was unsure what brush they supplied with it. Hoping it works well. Thanks for the review.

[@AirbrushAsylum]

Thanks for the compliments on my review and hope you enjoy using your battery airbrush when it arrives 👍🏻

[@dazthemod69]

Airbrush Asylum we’ll see what we can do. Cheers

[@DTczsk1999]

This airbrush is very good. 👍

[@daimonworker2807]

Is the battery okay for professional use? .. the actual duration at full charge to what amount? Hi and thanks for your nice videos.

[@AirbrushAsylum]

Thanks for your comment , this vid was literally filmed as I used this unit for the very first time ...I will do more in depth vids and follow up vids answering some of the questions that I am reading here 👍🏻 from what it says in the manual charging time of 1.5hrs to get 1-2 hours of use , we will see 🤞🏻

[@ronaldcheatham1365]

Thanks for the demo.

[@kenyabindner295]

Can you use other brushes on it , and how’s the heat from that box, what about using an water trap with it

[@AirbrushAsylum]

Great questions , SprayGunner have informed me that the PS770 fits so I assume other brands will as well 😉 not sure about water trap but I’m sure I can try one out and so far no heat...but I haven’t painted with it long enough to give a accurate answer 👍🏻

[@lambrettaladUK]

Is the pack compatible with other airbrushes also how long will that last with the continuous pumping I wonder

[@StephenCole1916]

Yes, I was able to adapt a couple of iwata airbrushes to this pump. It works pretty good.

[@AirbrushAsylum]

Take a look at this video this should help to answer your question 👍🏻 kzbin.info/www/bejne/f2banIaii6iLnck

[@StephenCole1916]

​@@AirbrushAsylum Good video, that is essentially what I did. Though I had to use a different trigger that had a slightly longer pin to hit the activation on the pump. I borrowed one from another airbrush and put the one that was too short on the one I borrowed from.

[@martybass9727]

I got a question I ordered one of these but when I put the gun on the canister and turn the power button on on the canister it wants to blow air I cant stop it with the button or nothing am I doing something wrong cause I hope to hell I didnt get a lemon and have to return it it shoukdnt do this and only blow air when I push the button

[@aljohnrhey]

Im new to airbrushes. Are these battery powered airbrushes and the ones that comes with a small compressor good for painting scale models like gundam? Thanks!

[@MASTOMOKUCRUSH]

Is that 20 psi?

[@TruthBomb4U]

Awesome. Suprising results. Seriously thinking of getting 1 now.What needle did it come with?

[@simonac688.]

Its quiet amazing ...🚀 been wanting to start Air brushing but the compressor and the and the tube was for me very annoying

[@gregoryc.3620]

does it work for hair ?

[@AirbrushAsylum]

If you can reduce your product to a milky consistency then you can spray it through your airbrush 👍🏻

[@angelR7133]

Do you recommend buying it?

[@Waterratt4344]

What is the noise level like? I can hear it running in the video, but did not see a noise level comparison.

[@robmartin5414]

Be interesting to know how the pressure holds up over the charge cycle and can other brushes fit the screw fittings thanks for this review Carsten stay warm during the Aussie winter ❄️⛄️

[@AirbrushAsylum]

Thanks Rob and yep Melb is getting colder and colder lol ...SprayGunner have informed me that the PS770 will fit and I then assume other brands will also work. As for the charge we will see plenty more vids coming on this product to answer all of your questions 👍🏻

[@BlueImmortalStone]

The amazon link looks to be to a different airbrush with a mini plug in compressor? The video is great and has tempted me to look into getting one for mini figure undercoating

[@AirbrushAsylum]

Yes it’s a great little unit, I took another look at the link and the airbrush looks different but the battery compressor is the same , it does say late 2019 but this is the only link I could find on amazon from SprayGunner, I imagine they would ship the updated version but maybe request it when making a purchase, I will reach out to them and will find out if they have an updated link 👍🏻

[@AirbrushAsylum]

Just heard back from SprayGunner and this is the affiliate link which has also been now updated in the video description 👍🏻 amzn.to/32rFaBk

[@luke68stevens]

@@AirbrushAsylum Amazon now had it as "Unavailable" and they don't know when it will be in stock again :(

[@MrCcfly]

u got old models with o usb charging and side on off ,,and this under normal usbc kind

[@christopherscott934]

Cool...I guess? Seems like it would be kind of bulky feeling to me and definitely a matter of getting used to. Not sure if a set up like that would be practical for my use though with military scale modeling. I do wonder if the battery would work with my two Paasche airbrushes. I use a Talon and a Raptor for smaller detailing and camo patterns.

[@AirbrushAsylum]

Thanks for your comment and yes it would work great for scale modeling 👍🏻

[@mariamchardie5246]

my trigger plunger isn't activating the compressor to send air through the gun

[@michalis5817]

How many desibels when it is working?

[@ecchizen2626]

How is the vibration to your hands?

[@buzzsah]

I'm sold, a good grab and go

[@AirbrushAsylum]

Yep they are pretty awesome , looking forward to playing with it some more and sharing my thoughts once it’s had a few hours under its belt 👍🏻

[@billygrim5535]

Bought this airbrush after seeing the video. works fine but I didn't receive the extra cup and the charging cord is much shorter.

[@kennethbrewster5235]

What size is the thread on the battery.

[@AirbrushAsylum]

It’s a 1/8” but take a look at this video which may help 😉🤞🏻 kzbin.info/www/bejne/f2banIaii6iLncksi=KXszTz1IlDx7XH0P

[@tothepoint4240]

Can anyone say why the compressor won't ever turn off once you push the on off button?

[@puttyanimal3909]

Hard to tell how the spray pattern looks for fine work on that canvas surface.

[@pontushenkel3366]

Put your micron on it! Would be awesome to see how it holds up on that!

[@AirbrushAsylum]

Yes I totally plan on it 👍🏻

[@Ladosligese]

could you not connect a hose to this since it seems rather clunky

[@anthonyp4209]

How is the heat build up?

[@AirbrushAsylum]

Have only used it for a short period of time I plan on releasing more videos on this product answering lots of the questions that viewers have left here 👍🏻

[@Labyrnthdom]

I have this airbrush. It works very well. I love it. I use it to do not wheels cars. So I see no reason it the work on models or D&D.

[@shemar2683]

Hey question in your next video can u review the VIVOHOME airbrush??

[@AirbrushAsylum]

Happy to review anything that may help our viewers providing that the companies send me one then happy to do it 👍🏻😉

[@spqba747]

great review! thanks!

[@hipairbrush1053]

How much is it? Where can I buy it?

[@raheelmalik575]

I want to buy where I find.. I liveing Dubai

[@franktruss6110]

Is this good for shoes??

[@3DJapan]

I see you're holding it with two hands, for stability I assume. Do you find that's required or will one hand work?

[@AirbrushAsylum]

One hand works I just like steadying myself with both hands 👍🏻

[@michaelcamehome3647]

It great for dusting and cheaper than the co2 cans.

[@AirbrushAsylum]

Lol...yes it does work well as a handy duster 🤔

[@Patriot_Drone_Services]

Hello from Oklahoma Territory, USA. These are pretty cool to see in action. I’m curious what you are going to do with the airbrush itself (if anything) to make it perform better or are you just going to try it out straight away on some artwork? The needles on the No Name brushes are pretty rough outta the box and can use a bit of a polishing and putting the tip through a Sharpen Air needle tip shaper/restorer to even them up works quite nicely too. You can feel the grooves or fluting on the needle shafts on some of them. Again, Great video(s) as always. I’m still watching the Lucky 13 Skull video... keep the videos coming my friend and be safe.

[@AirbrushAsylum]

Thank you for your kind words and glad you enjoyed the vid and you are also enjoying Lucky 13. I plan to try some other brushes on it , this vid test was literally straight out of the box I didn’t Pre-test it or modify the brush, I just hit record and filmed it used for the very first time 👍🏻

[@Patriot_Drone_Services]

Airbrush Asylum - Always a pleasure, I don’t really watch any other airbrush videos, because your ability to teach is awesome. Not that others on KZbin are bad, I just find your teaching and techniques easily understood by me, and now my wife who also started watching your videos. This particular product performed very well just breaking the seal, doing a load and go vid. The working air pressure seems perfect for your 70-30 reduction. The quantity of color you were able to put on without light spots or tiger stripes was amazing. I use spray gunner pretty much exclusively and have become friends with most of the folks there in Oldmar, Florida. Can’t wait to see what you have next for us... 🤘🏻👊🏻🙌🏻👍

[@medienmond]

You can even buy an adapter to use the gun with a 1/8 inch air hose and compressor.

[@richardsupuration4543]

Hey! I want to ask its just and specially for this model ? And can show how the templates are made ? Cos im a designer and i have that dude about cut every shape and its possible do these steps from other form . Nice

[@AirbrushAsylum]

Thanks for your comment in regards to the templates AirShot stencils makes them so you can get in touch with them at airshotstencils.com 👍🏻

[@richardsupuration4543]

@@AirbrushAsylum im from the southern bro

[@jf6720]

Isn't it awkward holding onto the battery?

[@AirbrushAsylum]

A little...but it also feels awesome having the freedom of no air hose, I will know more once I use it for a longer period of time but I’m sure as technology improves we will see the battery shrink over time 👍🏻

[@flukve3574]

Very cool, will buy this

[@AirbrushAsylum]

Yep , it’s pretty cool and SprayGunner mentioned you can also hook up other airbrushes so keen to try that out 👍🏻

[@flukve3574]

@@AirbrushAsylum oh really great, my airbrush has the same fitting already from what i can tell, looking forward to your practical paint test video

[@flukve3574]

The amazon affiliate link in the description seem to link to a different product than the one used in the video?

[@wasabibros1541]

What size is the connector?

[@IMIatix]

what do you use to thin out the paint?

[@marcobaldi9697]

Would you suggest it to miniature painters considering the ergonomics of the small compressor?

[@AirbrushAsylum]

I think it would be a great fit for miniature painters, I have some miniatures that will need painting and I plan on utilizing this product when airbrushing them....vids on these coming soon 👍🏻

[@marcobaldi9697]

Airbrush Asylum Thank you! it does seem a bit bulky if you need to turn or move the minis woth your non dominant hand

[@jpwartist]

I was seriously considering buying one of these, but the Amazon reviews for this aren't great.

[@AirbrushAsylum]

So far I am impressed , but I can’t render any proper judgment until I have used the item for a longer period of time ...more vids on this product coming soon 👍🏻

[@BirneGilmore]

@@AirbrushAsylum Have you any new feedback on the compressor and brush? I ordered exactly the same and got it today and I'm also imrpessed. The only bad reviews I saw on amazon a few days ago were some rare that the compressor broke down after a month, but most people were satisfied (at least in germany). Would be cool to hear from you what you think about it by now :)

[@AirbrushAsylum]

I’m still using it and it’s working perfectly, it definitely has its place I still use my traditional brushes 90% of the time but this is definitely a very handy item to have 👍🏻

[@jessicacarter2469]

Anyone know how to put it all back together?

[@moonnight3847]

did the video on using this airbrush to create a painting ever come out?

[@bgw893]

How would something like this work for a Gundam model?

[@Steveoinlb]

I bought one for working on warhammer minis and the one i got was 70$ on amazon and it didn't work out great. The air pressure was good enough for high lighting and that's about it. On 28mm miniatures.

[@Drippymenace]

Mine isnt so pigmented and im using water based paint

[@smurflfc15]

the one on the amazon link is totally different on uk amazon

[@AirbrushAsylum]

If you are having issues with the amazon link then go into the description of the vid and you will find a direct link to SprayGunner who will be able to help 👍🏻

[@sharafatali-wb9ks]

plz give me detail how i get it in bangladesh

[@73nnelg]

is it a game changer or a gimmic?

[@AirbrushAsylum]

So far it’s been pretty good and the benefit of being able to attach other airbrushes see following vid kzbin.info/www/bejne/f2banIaii6iLnck makes a huge difference .

[@brianpreston8483]

noise level?

[@AirbrushAsylum]

Not that bad, pretty close to what you can hear on the vid 👍🏻

[@brianpreston8483]

@@AirbrushAsylum I guess that's what I am buying. Thanks

[@VegaBlendz_]

Why doesn’t mine spray like that?

[@AirbrushAsylum]

Keep practicing and you will get it to perform , also make sure your paint and psi mix is correct this vid may help 👉🏻 kzbin.info/www/bejne/n5rTmpuur9SNisU

[@jasonarce5169]

I just got one. And the first thing I have learned is to always keep the tip and needle clean.

[@jordanjones2046]

I'm on the fence about this airbrush. I will wait for the video of a full piece of artwork before rendering an opinion.

[@AirbrushAsylum]

Thanks and I understand here is the link to the video showcasing how the battery brush handles creating an artwork 👉🏻 kzbin.info/www/bejne/qmqtYmtvqtBroNE

[@Pushyhog]

mine want spray water out of box.

[@williamward9755]

The model I bought doesn’t have a ton of pressure, so you really need to keep that paint thin- like milk.

[@andrewnegri4678]

Mine is a little different when you turn it on air is on all the time

[@AirbrushAsylum]

Yes. I saw some of those on YT as well I believe this is the updated model .🤔

[@andrewnegri4678]

Got mine off ebay

[@mark110101]

no links in description

[@theresanothersteve]

Click show more...

[@AirbrushAsylum]

Yep as Steve mentioned click show more then scroll down and you will find links as well as other useful info 👍🏻

[@Peterjameslewis69]

Could this be used to paint miniatures would anyone know?

[@jherazob]

Look up Quinian's Budget Crafts, he did a review of these and yes, might not be good for high detail work but for the other 90% of what you want it for it's enough

[@patriciaordonezbeattie3456]

Paint doesn’t come out WHAT AM I MISSING please?

[@neshiah4747]

Where is the air intake?

[@AirbrushAsylum]

It hooks up to the bottom of the airbrush’s plunger assembly valve 👍🏻

[@Pushyhog]

this black autolock brush does no work out of box, would not spray water

[@AirbrushAsylum]

The one I show is the ‘no name’ by SprayGunner that said check the needle locking nut located near the rear of the needle once you unscrew the handle if this is not tight then the needle will not slide back and forth therefore not spraying any paint. Hope that helps 🤞🏻

[@GoldTopPoland]

something new ..

[@shanebowles4854]

That looks awesome, not very good for professional use

[@AirbrushAsylum]

Thanks buddy it’s pretty wicked ....I am yet to see how she performs creating some art but SprayGunner mentioned you can hook up other airbrushes ....so that means it could well be a great product for both beginners and pros 👍🏻

[@shanebowles4854]

Thats awesome mate, they do look pretty cool

[@kamishah3642]

Hello

[@briandyer8907]

Just about all the airbrush reviews I see on KZbin are always done on paper I'd rather see them on glass or something that don't absorb the paint!!!!!!