EBIKE TUNING FOR BOSCH SPEED BOX 3.0 vs. Volspeed V4

[@Pseudo_Placebo]

I have used both devices on a Stereo Hybrid pro 625 the volspeed offers much more for the money and is less prone to error messages

[@quazar912]

very good video and clear explanations, can you make video how to replace Purion with Kiox display sistem for bosch CX gen.4 motors? thank you!!

[@emtbzone572]

Can this be used for the new wireless Bosch system with the rim magnet and wireless actuator

[@agent00bodensee26]

no

[@Hulaj1981]

If you set a 45kmh limit on speedbox do you need to do it each time or just once?

[@powerbikesbg]

Every time after turning off the bike

[@ugotab4757]

Quindi sia il 3 che la 4 funzionano con il nyon 2022 ? Grazie

[@ptjmwjpag]

Good morning, is it still possible to apply this device to the latest engine versions of the Bosch performance line CX engine?

[@MarioGoatse]

Yes. If you have the Bosch Smart System you have to buy the correct one though. They sell the Volspeed V4 which is for Bosch motors up to Gen 4 CX. If you have the Smart model then you buy the V4 for that one. The seller will indicate which motor it’s for.

[@powerbikesbg]

Check my other videos about Smart System

[@vidman999]

My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them .Only 1 of the ports don't have a wire plugged into it. Is there some other product or adapter that I'd require to make this work?

[@noneofyourbusiness4294]

You need the versions for the smart system. This one is only compatible up to Gen3. Different plugs, different software

[@WayOfTheWatervole]

What stem is that you have there?

[@michaelmccann3331]

Hi! I have the exact sine bike as you, and I bought the V4, but when I opened the motor up? I haven’t got the other two plugs? But I’ve only got an LED?! I’ve ordered a Kiox 500, will that fix my problem?

[@karlespinoza8125]

Im having same issue mate im gonna kiox i think cause just leaves me guessing what im pressing with LED only haha

[@davzer3773]

Sounds like you have the Bosch smart system, VOLspeed 4 is not compatible with a smart system, you’ll need a system specifically designed to work around the smart system anti-tuning software

[@umbrahusky8686]

I got the cube reaction 2023 can I remove the rim magnet

[@powerbikesbg]

Did you have Smart System? In any case you can not remove the magnet!

[@umbrahusky8686]

Yess I have

[@kumpel76767]

Geht bei dir dein normales Licht noch???

[@radwanradwan6369]

what is the limit before the error comes on TB3? I want my bike to go maksimum speed? What to chose? TB3 VOLSPEED v4?

[@powerbikesbg]

Did you mean SBox3?

[@yaboobaker]

I bought a scott patron 900 in april 2022. Cant figure out the difference between speedbox 3.0 and 1.0.. please help me choose the right one. Thank you

[@Psyopcyclops]

If you have a Bosch Performance motor you should get the Volspeed V4. The Speedbox unlocks the speed as well, but you can’t just turn off your bike at the end of the day. You need to let it time out or you get errors. With Volspeed V4 you just turn it off. Much easier to not have to wait 5 minutes just so you don’t get errors

[@powerbikesbg]

3.0 is for Bosch GEN 3 and 4, 1.0 is for the new Smart System..check my other videos

[@greghaynes790]

​@@powerbikesbg2:35

[@stipanici100]

What do you recommend? I have read a lot that Vollspeed is better than Tuningbox 3. I have Bosch gen.4 with 85nm Cube Reaction Hybrid.

[@powerbikesbg]

If you are OK with 45 km h. Volspeed! No errors and countdown needed!

[@ivobojas8775]

If you like to ride without limits and have more features, then speedbox. I had Giant, now speedbox 3 and works perfectly. Many times I don´t even care about countdown and nothing happened :)

[@powerbikesbg]

@@ivobojas8775 by Bosch engines error code 503 may aper, so the countdown is important.

[@Psyopcyclops]

@@powerbikesbgAgreed. I’ve done a lot of research for my Cube Reaction Pro and the Volspeed 4 is better because the lack of countdown. 45km/h is easily enough.

[@gesmondfarrugia1109]

Volspeed is without error

[@seamusdelahunty1615]

and the prices are?

[@powerbikesbg]

check online

[@seamusdelahunty1615]

I'd have 2 have the internet for that

[@mcplutt]

@@seamusdelahunty1615 yes

[@luccibubbles3471]

170 euro’s

[@piotr5217]

omg... maybe next time when you upload a video, check the informations before.... 2,5 and 9.9 its not a fckin speed!! its a % of using a engine (mid-motor) so when you press a WALK Mode on then you get a access to 99% power of the engine. This is not a speed!! you will not a drive 99 km/h wtf...