BBBs02e24 | Dynatek 3000 Performance Ignition Install, Test Ride & Review | XVS650 or V-Star 650

[@jeffsinfield2085]

When you took it for a test run and I heard that laugh I knew it was a mod that was putting a smile on your face. You were having way too much fun for it not to have worked and to have worked well. Brilliant, well done.

[@iRidetas]

Haha I was so happy I got such a bargain on something that made an obvious difference 😀😀 cheers Jeff! Hope you are well!

[@jeffsinfield2085]

@@iRidetas Doing great my friend and the same to you and yours. Have fun on those Tassie Roads and have a great and safe Christmas season.

[@macg.5991]

I put this on my v star 650. Made a huge difference! I upgraded the coils a month later and it has never had this much power and smoothness! Great looking bike! Progressive rate spring in the rear makes a huge difference as well!

[@iRidetas]

I found it worked really well, i am looking into coils atm!

[@christopherkimmer8240]

Dyna says factory coils are sufficient. I run a 1700, your sayi g you seen a boost in power from the coil tho?

[@macg.5991]

@@christopherkimmer8240 it ran great with the factory coils and module upgrade. Definitely wasn't a huge power increases from just the coils but seems to respond quicker and less backfireing on deceleration with the upgrade. My factory coils could have been going bad as well. I wasn't clear in my wording but I meant it had more power with everything done then from stock. Would definitely do it again though

[@meckkz387c]

What coils did you use?

[@iRidetas]

Stock

[@paulg9314]

Merry Christmas Tas. I've enjoyed your vids this last year. Keep up the good work, and all the best to you and your family for the New Year.

[@iRidetas]

Thanks mate and hopung you anx your family had a great xmas and a happy new year!

[@HellblazerRC]

Nice! I was not really sure to buy one for my 650, but after looking the video im very sure to them😂🤘🏻 my bike has dynojet kit 3, Hypercharger and an open exhaust so the power level is much higher with the dynatek 3000 box👍🏻 thank you!

[@iRidetas]

Glad I could help!

[@andrewowen5336]

What year is that? I have an 09 and I cannot seem to find a dynatek 3000 for the particular year. I don’t know what differences could be that big. Anyways I learned a lot from you brother! I appreciate you

[@iRidetas]

Cheers mate, Mine is 1997

[@Daniel1.618]

Dyno+rejet+pipes replace, how mach it will increase top speed ? I can get 150 km/h withdowt the bike screaming ?

[@s.charter]

You did well at $99. Looking at Dynatek bits for my 1600 in '21.

[@iRidetas]

Yeah I was stoked it was a great buy! Hope it works for you as well as it did me!

[@s.charter]

@@iRidetas with a limiter of 4200rpm on such a big bike, there's no failure in upgrading lol.

[@davidleal7133]

Awesome can’t wait to get mine

[@iRidetas]

Good bit of kit

[@frankysworld]

Nice - been trying to find one for a Suzuki VZ800 for a good while :)

[@iRidetas]

I'm suprised how well it works! 👍👍👍 merry xmas mate!

[@rodrocket8216]

Very good. Gonna need better suspension next, judging by how far over your getting now.

[@iRidetas]

Thanks mate, made a noticable difference!

[@joshuahubert1096]

Stupid question for you, your bike? I noticed that most Yamaha's have a top speed of 65 miles per hour. Mine kind of tapped out at 80 and started slowing back down. Do you think this part will actually in crease the speed of it or no?

[@iRidetas]

Top speed, no chance, its limmited by shaft drive gearing, torque and hp. Fun factor and throttle responce etc. Absolutely yes!

[@joshuahubert1096]

@iRidetas Okay, thanks. This helps a lot.

[@Viper6-MotoVlogger]

Merry Christmas mate🎄🎄

[@iRidetas]

To you and your family too! 😀👍

[@Viper6-MotoVlogger]

@@iRidetas thanks mate.

[@admwalker4361]

Opção de cdi esportivo para dragstar 650 ano 2008 ?

[@eliaschavez9444]

Can you run the stock coils and wires or do you have to buy the Dynatek coils and wires? Thank you!!

[@iRidetas]

I'm Using stock coils and wires!

[@BOBBER400]

Sounds like it is a perfect fit & at that price. Great job m8 : )

[@iRidetas]

Thanks mate, it's awesome! Merry xmas!

[@BOBBER400]

@@iRidetas oh yeah Merry Xmas yo you & fam : )

[@jameswalker598]

Hey man just wondering if you know, do these still work on a 2017 model xvs650 custom I can't find info anywhere. Thanks in advance.

[@iRidetas]

There website has all the model compatibility you will need

[@jameswalker598]

@@iRidetas yeah I emailed them apparently they can only guarantee compatibility up to 2005 but given that the only real difference is in the carbs which I have already fixed I might just grab one and give it a go

[@rollingthunder45]

Lift the bottom exhaust pipe to line up with the top one dude, both upswept will look much better, bike looks way cooler than stock, good job buddy, have a safe new year and best wishes to you and your family.

[@iRidetas]

Thanks you too! Hope 2021 is a better year for all!

[@edzhalbert462]

Hey mate installed the 3000dynatek but now my headlight wont work do you know a way to get around this

[@iRidetas]

I cant see the two would be connected

[@edzhalbert462]

@@iRidetas yea like wise,I put the stock ecu back in and what the head light works

[@iRidetas]

Weird, but could be a short between those circuits or the plug is incorrectly pinned, not sure mate sorry

[@Yigo.Smokes]

Is this compatible with the 2007 xvs650 i only find them up to 2005

[@iRidetas]

To my knowledge there is no difference between years but it is up to you to do the research or contact the company mate!

[@jamesbrooks6281]

When are you going to do a 4spot brake conversion . Im just trying to work out which calliper to use on mine At this time

[@iRidetas]

It only works on classic front wheel, I'm now running 19inch so spokes touch the caliper casing

[@jamesbrooks6281]

@@iRidetas Bugger

[@gabinogarcia64]

Hi have 1982 Suzuki gs650 g can this system work on it?

[@iRidetas]

seriously mate or are you taking the piss? 🤷‍♂️ this is a v-twin vs a 4 cylinder you are asking about, you would need to research your own bike on the dynatek website as it will have to fire 4 cylinders not 2!

[@raukawan1183]

Hey bro dumb question but are they used on carbus or fuel injectors ?

[@iRidetas]

Carbs

[@huhwut1245]

Did this increase top speed?

[@iRidetas]

Its pretty limited by the shaft drive gearing ive found

[@whitecompany18]

Sounds like an aprilia sxv 550 motard whipping round them back roads now 😂 a bike I'm very tempted to get , got a few bikes on my list to get when this is over , haven't ridden in nearly a year now with our lockdowns , got in trouble for taking my boat out that once in the summer. If China and Russia don't invade us in the next year and the Rona goes away I'm looking to get off this godforsaken island asap . Not sure how yet in terms of bugout vehicle whether I'm going the bike, boat, truck or car and trailer route ...these are uncertain times here in the UK .we just got brexit and a day later the French block the tunnel to prevent food getting to us and sent out huge super trawlers to destroy our fishing grounds, videos of them needlessly killing the dolphins and tuna and discarding them overboard then social media covering it up. So I think the big takeover is now in motion ..but I'm just a crazy conspiracy theorist ...and can't make up my mind on doomsday bike.. that's why I got the Honda xr and the Enfield..but naar ..something new and fun 😂 maybe a new T7 or the older 660 tennerlady (tenere ,but in England tennerlady is a brand of female hygiene product's and the bikes got nicknamed after them) but who knows what bike I want one of everything haha. hope you had a good crimbo if you do all that mate and a happy New year.

[@iRidetas]

😮😮😮 tenere t7 would be the ultimate doomsday bike imo! Hope your doing ok mate,, lockdown was hard here and you guys sound like you are doing it tough there! Take care, merry xmas!

[@creativeexperience6388]

Will it work on the vstar 1100classic

[@iRidetas]

No, model specific

[@jacobjensen4697]

The vstar 1100 has one just search on the site

[@MrJohnno89]

What year is your bike ?

[@iRidetas]

1998

[@MrJohnno89]

@@iRidetas will this work on a 2014 custom

[@iRidetas]

Yes

[@MrJohnno89]

@@iRidetas thanks mate

[@syedasim8640]

Which one do you feel better Dyna or powertronic?

[@iRidetas]

Not comparable one is for ECU one to replace tci

[@syedasim8640]

@@iRidetas 🎄