BBSHD upgrade kit ASI BAC 855 P&P

To order upgrade kit visit at this shop:
www.taisomirga...
Or visit our Facebook:
/ taisom.gaminam​
Controller is programmed for 36-72v battery and 4000w, 106amps peak power. (for special order, settings can be changed.)

[@SpreadingKnowledgeVlogs]

I have a similar set up but use the nxt display from my boy Alan at ERT what's nice about that is the full tuning capabilities from the display itself and you can also run the egg rider v2 display on the same harness and switch back and fourth if you want something smaller at times

[@luckyfire3]

I can't wait for the black Friday deal this thing looks awesome.

[@comfortablynumb8832]

Did you buy one

[@luckyfire3]

@@comfortablynumb8832 no they were never a good deal unfortunately

[@johnnylong2049]

Can I use a 52v one day and a 72v the next day without having to change anything (display, or changing stuff on the computer)?

[@fabijus100]

Hi! yes, we can program controller to work with all batteries. Contact us directly - [e-mail] for more information.

[@mattjonesturbo1]

Seems like the cyc x1 stealth kit uses a similar controller, eliminates the need to do anything and much cheaper in total. I wonder what the performance comparison would be. 🤔

[@yellowsheeps]

CYC X1 Stealth is lighter, includes same controller and has "torque sensor". BAC 855 housed beside motor (cleaner install). CYC motor is more powerful (1500 W). The only thing BBSHD has vs CYC X1 Stealth is history, proven reliability and availability of spare parts.

[@JohnjOcampo]

@@yellowsheeps i bough the bac855 from CYC, will it still work for my bbshd? Cause it said it was only programmed for CYC motors but i figured that was just a warranty thing.

[@yellowsheeps]

@@JohnjOcampo The CYC Bac855 controller is only for their 2 motors and even in this case, the Bac855 is not interchangeable between the 2 motors without re-programming. To use the Bac with the bbshd, you would need it re-programed by someone familiar with programming a bac855 for a bbshd.

[@JohnjOcampo]

@@yellowsheeps wow man what a huge mistake i made, im going to see if i can cancel the order. Thank you for the info. Where should i buy the asi bac855 for the bbshd?

[@yellowsheeps]

@@JohnjOcampo The link from this video is a seller. The Bac855 is in short supply and on back-order worldwide so you should have no problem selling one.

[@TheADRIANOVALENTINO]

Thats awesome. How much more is the torque watts and speed? Without that modification its around 165 NM torque , 1500wt peak, and up to 65km hr.

[@fabijus100]

Hi, All details you can find here: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

[@TheADRIANOVALENTINO]

@@fabijus100 Ok il have a look. Thanks for your response. Im not a computer electrical guy, bit of a stupid question but I was wondering where you hook up the battery? Do you have a video on the conversion build ?

[@TheADRIANOVALENTINO]

IM looking at the item doesnt say how much more powerful and faster it is maybe im blind..lol

[@fabijus100]

@@TheADRIANOVALENTINO The controller is programmed: FOC Voltage: 36-72v. Power: 4250w.

[@slabvu55]

Does this controller have a limiter

[@davidfreund8844]

Asi Bac 2000 und bbs02 Geht das auch ?

[@thonkingintensifies9510]

Is there a way to measure the internal temperature of the motor, so it doednt overheat

[@raffg341]

buy a digital thermometer from an aquatic shop and install when opening casing

[@SpreadingKnowledgeVlogs]

Yes there's a way but there's a lot you need to do to get it working and you need to have both back door access and knowledge of how to wire it up.

[@JoseLuis-wz6xh]

Hi, can this kit work with any other display like the 500C? Or eggrider? Or is it only with the one shown compatible? Thank you

[@fabijus100]

Hello, It can't work with 500C but it can with eggrider. Check it out: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

[@JoseLuis-wz6xh]

@@fabijus100 Thank you very much for the response. I am about to purchase this controller paired with the eggrider V2. The only question remaining would be, what would be the minimum requirements for a battery to run this system? l have a 52V 13Ah with a maximum rated 30A discharge continuous, would that be able to run or should I upgrade to a bigger battery? Best regards

[@fabijus100]

@@JoseLuis-wz6xh we can program controller for your battery but if you want to get maximum power we would recommend to use 52v with 70a discharge or 72v with 50a discharge current.

[@Andaeldiabloitsomar]

Would the bac 855 work on a RX motor?

[@SpreadingKnowledgeVlogs]

If you mean a super73 Rx then yes it will work on any brushless motor

[@smarc1325]

Worth the Money after all?

[@fabijus100]

Yes, Because speed and torque is bigger!

[@smarc1325]

@@fabijus100 im considering about buying 😁 thnx for answer🙋‍♂️

[@vincentvincent2658]

is the included eggrider the one for 30 to 52v or the 30 to 72v?for the 72v do i have to + it

[@fabijus100]

Hello, There is the option to use EggRider with all batteries.

[@ruslangozoloev9089]

Hello friend, if I have a 48v battery, I can change the parameters to 60/72v and what won't happen? Tell me can this be done with bbs02 750w? If you can write in Russian through a translator.

[@fabijus100]

Hello, please write your quetion in English to [e-mail] we will answer as soon as possible :)

[@A.G_369]

For bbs02b?

[@thomasjurd4144]

Where did you buy . I was concerned about speedo

[@fabijus100]

www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

[@JohnjOcampo]

Hi i am planning on buying this kit but i already have an eggrider V2, can i get the kit without the display?

[@fabijus100]

Hello, Yes. Contact directly with us via email: [e-mail]

[@JohnjOcampo]

@@fabijus100 got it, thank you.

[@Mist3Rray]

Are these kits still available? if so what is the Cost to ship to US? California?

[@fabijus100]

Yes, www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

[@kanibis420]

Is it worth $600 ??

[@fabijus100]

@@kanibis420 our kit converts BBSHD motor to the rocket! 🚀

[@JpBillardreviews]

Does this work with the 750 BafaBBSO2

[@yj8471]

Yes I use one on the 02 they work fine

[@Edward-nz4ck]

Wow

[@motul800]

3 or 9 support levels ?

[@fabijus100]

yes, you can choose between 3/5/9

[@jeffonrides]

Hey does it matter which phase wires are connected together?

[@TheFilminators]

Can this be put on a bbs02?

[@yj8471]

Yes I use one on the 02 .

[@pc9395]

Been trying to get mine to run from the Eggrider but with no success can anyone point me in the right direction I have a useless broken 750c screen that will not power up, and find it impossible to replace with the BAC855 protocol

[@fabijus100]

Hello, Contact us by email - [e-mail] We will offer for you 750C display which will work with ASI controller.

[@yj8471]

@@fabijus100 can you program the C500 mini it's a smaller better unit ?

[@fabijus100]

@@yj8471 Hi! Send us an email - [e-mail] Do not forget to add all necessary information and we will reply to you as soon as possible!

[@pc9395]

@@fabijus100 what information ?

[@fabijus100]

​@@pc9395 Hi! The previous message was to @yj847. For the @pc9395 Contact us by email - [e-mail] And describe your problem.

[@motul800]

Hello, can I choose between 52, 60 and 72 volts on the display? Can I adjust the strength of the support levels myself like with the bbshd controller? Can I set the max ampere myself?

[@fabijus100]

Hello, you can change each assist level power by % in advanced settings. Talking about batteries - we can program controller for one specific battery or remove all limitations which depends on battery. For more information contact us on Facebook- Taisom ir gaminam Or email- [e-mail]

[@cohengal1584]

did pas work?

[@fabijus100]

Yes

[@bpoman1234]

Will this work with bbs02?

[@fabijus100]

Contact directly and ask 😉 [e-mail]

[@yj8471]

Yes it does I run one on 52v at 2600w same display runs perfectly..

[@themrfabio2459]

Music ruins all vids!

[@jacobwhitcombeCNC]

Is this 72v?

[@fabijus100]

Yes, it can work with 72v. You can order here: www.taisomirgaminam.lt/en/produktas/asi-bac-855-pp-versija-bbshd-varikliui/

[@JpBillardreviews]

Does this work with the 750 BafaBBSO2?

[@fabijus100]

@@JpBillardreviews you will need to change some connectors, and when - yes

[@lovestheh20]

@@fabijus100 no longer in stock

[@fabijus100]

@@lovestheh20 it will be in stock soon. If you are interested write us an email: [e-mail]

[@sigmaoctantis_nz]

Why not just re-use the controller housing from the BBSHD instead of putting a plastic one on?

[@fabijus100]

If you want you can use original controller cover ;)

[@thomasjurd4144]

How much

[@fabijus100]

www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/

[@GB-vn1tf]

Does that work o a bb02?

[@kampango789]

Speak