Beautiful Versetta Stone Siding Install, Rookie Experience, Professional Results

Today I started on the Versetta Stone Install on the new building, Although I have never used this product before these stone siding panels look fantastic and the installation process wasn't very difficult. This will make a beautiful accent to the patio area of the new building where you enter the game room.
#versetta #hobbybarn #DIY
Our Website: www.outdoorswiththemorgans.com
Our FaceBook Page / outdoorswiththemorgans
Our Instagram outdoorswiththe...
Our Amazon Affiliate Store www.amazon.com/shop/influence...
Our Address: Outdoors with the Morgans
P.O. Box 2140
Cranberry Twp. Pa 16066
Partners and Sponsors
Kubota USA www.kubotausa.com
Wolfe Ridge Log Splitters www.wolferidgemfg.com
Exmark Commercial Mowers www.exmark.com
Exmark Backyard Life backyard.exmark.com/ambassado...
Stihl www.stihlusa.com
Wallenstein www.wallensteinequipment.com
OUR EQUIPMENT LIST
Kubota KX-057-4 Excavator
Kubota MX 5400 Utility Tractor
Kubota BX 23S Subcompact Tractor
ExMark Lazer Z S Series Zero Turn Mower
Wolfe Ridge Pro 22C Commercial Log Splitter
Woodmizer LX 150 Sawmill
We live in Western Pa. and Have around 100 Acres of Land, About 1/2 is ours the rest is my moms, We have 4 kids and one grandchild, 3 Golden Retrievers and one Cat. We enjoy working on our property and making improvements. We sell firewood and soon will be selling hardwood lumber.

[@stevehawkins8066]

I've only been watching these types of KZbin videos for a few months and I'm just amazed how the YT community gives shout outs to other YT channels. Whether you live close or you live far away, you support each other. Thanks again for making these videos.

[@HallnoutMhall]

Good morning Morgan family and friends. Stone looks good Mike. Remember to cover with plastic before the pour. Everyone have a blessed Sunday and be safe and we'll see ya down the road....

[@DragonflyAcres2022]

You too Michael. Thank you

[@HallnoutMhall]

@@DragonflyAcres2022 thank you

[@russellbowman8051]

Love the Look !! Great Job For A First Timer !! I was not surprised Mike You Always go the Extra Mile and The Job Is Right When Finished !! 👍👊

[@tjjansma547]

Love first hand input on a beautiful product! From one installer to another, thank you much! Keep up the great work! ✌️

[@robertdean9392]

Stone looks great!!! I learned how to install from Kyle. I talked to him before I did my 1st install. That's why I suggested to you to watch his channel to get pointers. Cabin in the woods is loaded with Rosetta Stone and leared alot.We have installed about 40 pallets on 21 different jobs. To cut your fillers, get a masonary blade for your skill saw ( use a old skill saw if you have one). Kyle is a excellent craftsman and good at what he does. Have a good one!!!

[@scotduckrow8524]

Husqvarna finally gets to make a cameo appearance. The Stihl shutout ends!

[@scottcusick6274]

Great job on the stone wall installation. I really like watching your channel.

[@susiebryant381]

All your extra measuring will make the entry to your new building ... beautiful. "Hey" to Hunter!

[@johncollins500]

Good morning M. & M. from sunny S. E. Ohio. Great job Mike. Beautiful. I have checked in with R. & R. Building when I was putting metal siding on our house we built. They are great company. Thanks to you & Melissa for sharing 15-30 min a day of your lives with everyone. I know you put in a lot more time than that to give us the vid. Again, thanks and tell Hunter a big Hello!!

[@northeasterndirtandpropert7974]

R&R,probably one of the best builders on youtube.

[@markbrown1011]

Good morning Morgan's, Mike the best way to rip the cultural stone ,is use a industrial diamond blade. You can get a small blade for your 4 1/2 angle grinder, looking good.

[@garybessey2184]

Unless I'm mistaking the situation, you can also use an abrasive disk that's meant to go on your handy-dandy power saw. I've used that kind of set-up to cut a slot (with water flooding) in a concrete sidewalk to establish a break-off edge to shorten a walkway. Blade dimensions are similar to regular wood cutting blades. Gary

[@constitutionislawofthislan6169]

I love the Verseta Stone, also stacked stone. Yours looks great.

[@stevetheiss3627]

Put this Versetta Stone up on the front of my garage. Love the way it looks! Made all my cuts with a 4.5" grinder with a masonry blade and a masonry blade on my 7.25" Skil Saw. I can see that a wet saw would have been much better. Dust was pretty bad. Mike's right, once you get it lined out it goes on quick. Highly recommend the product.

[@olddawgdreaming5715]

Good job Mike, it’s looking great. Thanks for sharing with us. Fred.🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋

[@davedavis662]

Kyle with R&R is the man, major props for the call out. Mike You’re are man of integrity and it’s just one reason I follow your channel. Nice stone work the shops really looking sweet.

[@michaelfirestone6670]

I really like the look of that stone. You make the installation look easy.

[@carlwhite8225]

Mike, That is a great look, Thanks for sharing.

[@loyd2264]

Just another fantastic job Mike! Well done sir! 👍

[@jimconnor8274]

As always, your projects look top notch!

[@Chris-jh3tg]

Looks fantastic! I think you did a great job.

[@lyndacampbell827]

Excellent video! Great job with the beautiful Versetta Stone Siding!

[@gbsbill]

Great Work Mike: as I watched I was thinking you need more water, but you figured that out.

[@matthewsims359]

That stone really looks good. Stay well, stay safe and yall HAVE A DAY

[@Dale.Nienow]

Great video Morgan’s! I am a landscaper so I use them pretty much every day, I use the IQ Power block and paver saw, no water, no dust!

[@thecomoroskys]

As always good stuff Mike! It says a lot about your character that you give credit to the guys over at R&R’s Channel and you admit to not knowing how to do it all. You are a great and honest content creator, you tube is lucky to have you on their platform still. The shop project is looking fantastic so far. I’m really looking forward to those heated concrete floors! God bless from Idaho!

[@davidbishop4015]

Nice job Mike. When you're done you will be a certified weekend warrior at hanging stone. Looks good.

[@smoke09able]

Good work Mike. Nice look for the building entrance. I like the ease of installation of the Versetta Stone product verses using mortar or adhesive which I've done in the past. Thanks for sharing!

[@dmorgan28]

That versetta stone really looks good. We like it. Lookin good 👍👍👍❤️

[@strangeoaks]

It looks easy enough . At least you made it look easy . Great job

[@wyattearp1418]

Looks Great Mike ! Good Job.

[@mikeelwood8626]

Looks terrific!

[@ronaldritchie5189]

Mike u done good on the stone and kyle RR buildings I love watching his videos he knows what he's doing

[@vincenechwedowich2152]

good job mike. kyle would be proud of that job.

[@aaronbaum2542]

Beautiful Look and you are doing a really great job in my opinion!! 😎

[@er1073]

just learned a lot Mike I have never used a mason saw either 68 years on this earth but you made it look easy. I think Melissa's idea could work it would just take a little while longer. This is going to look fantabulous. Thanks a bunch for sharing this video with us. Hello Hunter. Ed

[@marcuswhite3628]

The stones look elegant! Very nice!! Marcus from Chesapeake VA.

[@keithbeynon3878]

Looks good Mike, congratulations on a job well done.

[@tlcmich1950]

I really like that cap stone you have already. It's made to finish the top and protrudes out like a ledge. Just need to engineer a way to anchor it. Good job Mike and it looks really nice!

[@matt65482000]

Loved this video

[@richarddonovan8373]

You are doing allsome job Mike and keep up the good work

[@48VAC]

Nice job. That is the exact same color and style of Versetta I specified for the last project I designed.

[@scottdawe7412]

Good morning from Gautier, MS! Looking good, can’t wait to see it finished. For your first time you’re doing pretty darn good!! Have a blessed day! 🇺🇸

[@CliffsideStables]

Hey Gotcha, MS my wife’s old stomping grounds. Tim

[@dodgeman658]

Awesome comment to take out a loan for some 2×4s 😂 looks good for a weekend warrior👍

[@jimb2580]

Let's get a whole full view once you get the outside finished Mike! I had never considered this for the outside wall of my barn but if it looks good I'll do it for sure! Keep up the great videos!

[@bortonihoracio]

Thanks Mike you are amazing! 👍

[@donmcc4189]

That stone looks great on the building. It brings out the entry door. You should do the entire front of the bar inside in it.

[@tuttova]

Excellent job!

[@DragonflyAcres2022]

Very nice Job.Thank you for sharing

[@grantoyamaha]

Excellent job Mike 👍

[@waltermattson1730]

The stone is looking great. Melissa was hilarious at the beginning when she help up the two pieces.

[@hpelisr]

Hand held grinder with a masonry blade. You may have to take the shield off, but don't tell.

[@robertkribs9513]

Agree!

[@Snarkapotamus]

That's what I use...

[@gregayrheart122]

A diamond masonry blade on a hand held grinder is the best way to cut lengthways on this stone. Believe me, I think I’ve tried every other way.

[@tommyordoyne7461]

When you cut the first piece, seeing all that dust, I thought I was watching Wranglerstar. Much better on the next one. Looks great. Have a productive day.

[@caljim1950]

Looks great!

[@HeavyIronAcres]

Looking very nice!

[@martykennedy3962]

Damn good job Mike. Reminded me of the time my dad put a product called “mural stone” on the front of our house in the early 60s.

[@phinney4398]

Good morning Mike and Melissa God Bless.

[@imo8628]

That is coming along very nicely Mike, well done. cheers buddy and stay safe.

[@thebradleysoncatbirdhill6849]

"All jacked up!" In Mike Morgan-speak.... That's generally not a good thing! Love it! 👍💪

[@yvesberthiaume2521]

Looks great....good job

[@stevemartinez6757]

I've been on planet earth the same amount of time and can say that I've never worked with that material or worked with a saw like that. I think that you are doing a wonderful job. It's one of those things where if there is a flaw when it's done, you're the only one that will ever know or ever see it.

[@keithburch5506]

Heck yes! The stone looks great! Nice compliment on the building. When we built South Caldwell High School, all the exterior walls were stone blocks. I was the one using the saw. After the third blade went bad my boss finally went to his boss who came to see what the heck. Turns out, the diamond blades were the wrong ones. These blades are stupid expensive. After the new blade arrived, my job of cutting went much better. Mike, as always you make the job look so easy. Sure this is your first time, but here you prove to all of us what great common sense you posses. Kudos to you, the stone looks great! I hope you have enough corner pieces. Now I'm ready to start my day, thank you sir for this great video, sharing the Morgans w the world! Awesome.👍🚜❤

[@allenjackson1371]

Looks great and your doing a fantastic job installing it wish your videos were longer :)

[@Bigtoolrack]

Looks great Mike!

[@shooter910]

"54 years on planet earth and never used one" well as my dad always says, "you will never learn any younger!!" great job looks real good!

[@realairplane261]

Shooter, what planet do think Motor Mike came from. 😆

[@nealwiley9950]

Great Job Mike,especially being first time,,,have installed this product a couple of times for customers myself. Going to look great on the building....Neal from Illinois...Have a great day and keep on shining 🌞☀️🌞☀️🌞☀️👍👍👍👍👋👋👋👋

[@nealtubbs9608]

It looks great Mike! Good evening Hunter.

[@richardwright6639]

Looks good Mike!!!! Wish you were my neighbor. You can do anything!!! You would get sick of me. Stay safe and have a great day!!!!

[@bobbyd6499]

I’ve got the EXACT same knee pads Mike. Great measuring there too. As an old carpenter (my ex-landlord) said to me once upon a time ( he was 90 when we met) “MEASURE TWICE, CUT ONCE.” He also taught me the CORRECT way to use a handsaw because that’s ALL they had “back in the day.” It’s the ORIGINAL “thumb drive.” 😂

[@HomeWithTheBuffingtons]

It is looking good Mike!

[@michaelmijatovich8983]

Looking Great Mike

[@rickrainey2114]

Nice job on your first stone project! I've used those stone cutters several times. For those long 3' pieces, what I've done in the past is just free-hand it using the stone cutter. Mark you a cut line on the stone where you want to cut with your sharpie. Place the stone on the platform so that the blade lines up with your line on one edge. Turn it on and slowly push the stone through while following the line. If you run out of depth to get all the way through, just turn it around and do the same from the other side until you get all the way through. Any rough edges can be filed down too just by free-handing against the blade. Kind of like the way you would use a circular grinder saw.

[@merlewarnsholz2094]

Mike - Chuckled at you having to apply for a loan for the 2 x 4s. Good looking finish on the wall. I like what someone suggested about using it for the bar on the inside of the building. And Peter Mavas' comment about you not being "known for stone walling in life except for this vid..." made me laugh out loud. I got a look from my wife across the room, but oh well... Blessings to you and the family. Hi to Melissa, Hunter, Hannah, and Eva.

[@jeffhennings6015]

Stone looks awesome mike dream job

[@holymoly6829]

To be honest Mike I wasn’t to sure about the stone effect around the patio area Uming & ahring if it would look out of place Hats off It looks just right I didn’t understand how it should be hung but it’s a good product & looks great 👍 Nice one !

[@paulnash8666]

Looks great job well done 👍

[@michaelallen3667]

Looking good so far

[@rexwoodall2179]

Mike, Rex here from Charlotte. I enjoyed this so much! I see this product all the time and now I understand how it’s installed. You are doing a great job, it looks great!

[@markdiulio2245]

Looks great job well done

[@donbowersock9564]

Looks great Mike, good job.

[@OutdoorsWithTheMorgans]

Thanks 👍

[@tinachambers4887]

Looks good Mike have a day love from TEXAS

[@daletalkington5595]

looks good Mike!

[@thomasyerbey337]

Looks great Mike 🇺🇲

[@THEGENERALMAN]

Great video thank you

[@joehuinker7009]

What we said here in Wisconsin was if you can't see it from the courthouse you're good to go

[@kevinhall3443]

Looking good my friend!

[@billmorris2613]

R&R’s “Cabin in the Woods” is where I first saw this product used. I liked the way it looked and was one of the viewers that recommended it to you. The color you chose goes very well with the building.

[@howardjensen1010]

Nice job Mike. A few years ago I went to a pawn shop and purchased an old Makita portable job site saw and put a dry cut diamond blade on it for riping tile and stone. ( Different blades of course) one other suggestion, if you make a story stick you can save the fumbling around with the tape measure and speed things up a bit. Have a great day!

[@roywadsworth2102]

Mike i do like the coming up on your build i am sure that there were a few headaches that you were not showing us but that is ok cannot wait to see the build on the inside

[@ProjectsWithPaul]

Nice job. Those magnetic tape measures come in handy.

[@EstructuraDura]

Great video

[@bradwatters996]

Stone looks great mike.

[@jamiemacleod6463]

I would have fired that drill bit down in the woods about the third time it stuck. Nice looking stuff.

[@leekillman802]

Good reference video on how to install Versetta Stone. Buddy of mine used a diamond bladed large circular saw to rip the stone course. But he is steady as a rock (pun intended) cutting all types of material.

[@bradleymcclintock7771]

Looking good old boy !!!!!!

[@bigbigby4657]

Looks good 👍

[@dougsmith9099]

Nice looking product mike looks nice around the doorway

[@rogerkerkmann]

You just made a bunch of people spill their coffee you got a woodmill and you bought two by fours for nailers 😁🤪😂 ya killin me

[@gregs9187]

I came here to basically comment the same thing. He could have used his log slash pieces. No one would ever see them and they are free.

[@billmorris2613]

I thought the same thing when he was talking about buying the 2X4s. It would have probably been quicker to cut a few. I also thought the 3/4 inch plywood would have been good enough to screw to also.

[@1944chevytruck]

Very nice i like the stone look...LOL! USE YOUR MACHINE TO LIFT THE THING OUT OF YOUR TRUCK!...good job u 2!!... thanks 4 video. be kind.

[@brucesnow3506]

Hey Mike ... Look up CliC reading glasses. That’s your ticket! I’ve been using them for a few years now, and have only replaced once!

[@2020Tundra]

Mike, just noticed the “grocery getter” doesn’t have a sprayed in bed liner. Hey, the stone is looking great. I’m sure the final result will be awesome!